Supplier : Dimming driver, dali driver, DMX dimming driver, dimming signal converter, dimmer, CT, RGB, RGBW LED controller, DMX console, DMX decoder, DMX signal amplifier, DMX to SPI driver, power amplify, music controller, WIFI controller, LED digital controller, SPI driver, SPI signal amplifier
Established: 2001
Verification Status
Contact Details:
15th Building, No.3, Pingdong 6th
Nanping Technical Industrial Park
Zhuhai
519060
Guangdong
China
Working temperature: -20-60
Supply voltage: dc12v
Supporting number of the maximum channels: 96
External dimension: l224ª¦w128ª¦h37 mm
Packing size: l230ª¦w180ª¦h55 mm
Net weight: 755g
Gross weight: 820g
Static power consumption: <1w
BRAND: WEST PID TEMPERATURE CONTROLLER
WEST Controller:
Model: WEST-6100+,P6100
Model: WEST-4100+,P4100
Model: WEST-8100+,P8100
Features and Benefits:
Dual setpoints & optional remote selection
Plug-in output modules allow installing just the functions needed in
Expanded user-selectable operator modes in
User-selectable plug-and-play output cards in
Process and loop alarms in
Adjustable hysteresis in
Optional 10V SSR driver in
Improved Windows PC configuration software
Improved easy-to-use HMI
Jumperless input configuration
Auto-hardware recognition
Faster communication speeds
More security options
Backward compatible panel cutout, housing and terminal wiring capability
P6100/P6170/P8100/P4100
'ALSTOM' Protection Relay
MODEL NO:- P94VP16A7C0540A;
Advanced Transformer Protection, Control and Condition Monitoring Transformers are high capital cost assets in electrical power systems. Internal faults are a risk for all transformers, with short-circuits dissipating the highest localised energy. Unless cleared quickly, the possibility of rewinding will diminish and core damage may become irreparable.The MiCOM Agile P642, P643 and P645 address all these issues - preserving service life and offering fast protection for transformer faults. A transient bias technique has been included, enhancing relay stability and CT requirements. CT saturation and no gap detection techniques have been included to improve the low set differential element operating time during CT saturation where the second harmonic blocking might be asserted. An external fault detection algorithm has been incorporated to prevent the CT saturation and no gap detection from affecting the second harmonic blocking .
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic.
Functional details
1. Hot plug
Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system.
2. Advanced current sharing technology
Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A.
3. Control of input limited power
Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode.
4. Control of output constant power
When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module.
The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V.
The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage.
5. Temperature limited power
6. Regulation of output current limiting point
8. Regulation of output voltage
The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc.
9. Fan control
The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module.
10. Protection of input overvoltage/ voltage shortage
11. Output overvoltage protection
The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection.
12. Over-temperature protection
The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again.
13. Protection of internal bus fault
When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on.
14. Short circuit protection
In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
AC to DC converter battery charger 150-1000VDC rectifier 120KW power supply
Product Introductionï¼?
SANDI AC/DC Charger is specially developed for DC chargers. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase, DC output voltage range from 150 to 1000VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger.
Unique function
High efficiency over the full load range, full load efficiency greater than 95%
Wide output voltage range, 150-1000VDC, suitable for a wide range of Lithium or lead acid battery
5-inch LCD touch screen, easy to operate
Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate
Main featuresï¼?
Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc.
Wide input voltage range: 260~ 530Vac, adaptable to various power grid environments
Three-phase AC input without neutral wire: Simplifies system design, eliminates the risk of excessive neutral current, and reduces system costs.
Dual DSP design, achieve the full digital control, less components means high reliability
Wide input voltage range, allows operation in most poor grid conditions
Battery anti backflow: effectively protects the battery while ensuring reliable and safe operation of the system
Input, output have protective circuit breaker switch
Module adopts hot pluggable design, which is convenient for maintenance.
RS485 interface (Optional)
Brief introduction
T3x is the 2.4ghz rf wireless synchronization rgb controller which adopts ltech multiple global initiate technology. The control system consists of two parts, the rf remote control and receiver, realize the signal synchronization on unlimited receivers within effective distance. A very good solution for the led project needs sync control wirelessly. User-friendly full-color touch wheel for color selection, unique led state light for sync change indicated, user can simply know the led working state from distance by checking the remote control.
Ramming function in the remote control, how easy to program is !
Built-in sync state light, can display the led color in static or changing state synchronously.
Any operation on the remote control or any receiver can command all receivers to work wirelessly and synchronously, it's currently only ltech product has this capability.
Color changing scene mode and preset storage function.
Usb charging port.
Supplier: LED controller, LED dimmer, LED decoder, LED amplifier, LED power repeater, DMX/DALI/0-10V/SPI controller, touch panel, WiFi controller and dimming driver
