Radial Industries

Remote sensing for distantly situated loads for models above 5 amps.
Optional facilities : (at extra cost)

Over voltage protection (fixed / variable).
Input voltage: 115v ac ± 10%.
Rack-mounting, wall mounting, base mounting.
Ttl compatible active on / off.

Fuji Electric's UPS and power solutions have the best product specifications with the latest technology. Fuji's products are available in the 72 VA to 2000 kVA range, for single modules. For higher ratings, these can be paralleled to deliver 12000 kVA. Fuji Electric's high efficiency UPS helps in reducing costs, weight, footprint and heat.

Items with details.
1.Dual dc regulated power supply:-
Product name : " power supply, digital (variable) 30-0-30 volts "
Product code : " el-193"
Description :
Variable dual output
Dual Display DC Power Supply
Digital 30-0- 30V @2A
Technical Specification :
Output Voltage : 30-0- 30V @ 2A
Output Current :0-2A
Input Voltage: 110V, 60Hz. (Or 220V, 50Hz.)
Constant voltage/ Constant Current
Voltage and Current adjustment
Power effect: CV<0.01%+1mV, CC<0.2% + 1mA
Overload effect: CV<0.01% +3mV, CC<0.2% +3mA
Waves and noises: CV<0.5mV r.m.s, CC 3mA, r.m.s
Protection: High current limited.
Ripple & Noise: <1mV rms( I>3A), CV<0.5mV rms( I < 3A)
Digital Voltage and current meters built in with Voltage resolution: 2.5% of display reading; 2.5% of Current resolution: display reading
Back Light
Environmental : 0 - 102 F ( 0 -40 C), relative humidity: <90%
Size: (mm) 300X 200 X 170, "; Weight: (Lbs) 13



13LBS

We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.

Product Introduction
SANDI AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module.
Unique function
High efficiency over the full load range, full load efficiency greater than 95.5%
Wide output voltage range, 100-750VDC, suitable for a wide range of Lithium and lead acid battery
5-inch LCD touch screen, easy to operate
Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate
Main features
Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc.
Three phase active power factor correction technology, reduces the harmonic interference to the grid
Dual DSP design, achieve the full digital control, less components means high reliability
Wide input voltage range, allows operation in most poor grid conditions
Soft start charging and soft shutdown minimize the impact on the battery.
Input, output have protective circuit breaker switch
Module adopts hot pluggable design, which is convenient for maintenance.
CAN/RS485 interface (Optional)

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic.
Functional details
1. Hot plug
Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system.
2. Advanced current sharing technology
Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A.
3. Control of input limited power
Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode.
4. Control of output constant power
When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module.
The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V.
The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage.
5. Temperature limited power
6. Regulation of output current limiting point
8. Regulation of output voltage
The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc.
9. Fan control
The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module.
10. Protection of input overvoltage/ voltage shortage
11. Output overvoltage protection
The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection.
12. Over-temperature protection
The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again.
13. Protection of internal bus fault
When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on.
14. Short circuit protection
In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

From storm season to medical needs to the holidays, Duracell is the #1 trusted battery brand so you know it's a battery you can trust. Duracell CopperTop All-Purpose alkaline batteries are not only dependable, they're also long-lasting. You can take comfort in a 10-year guarantee (5-year guarantee for 9V) in storage.

Power you can trust
Long lasting
Duracell Battery

WPS3010 Adjustable DC regulated power supply station with output switch and short circuit alarm, WPS3010 30V 10A with 4-Digits LED Power Display and USB quick-charge interface is made for mobile phone power test repair which can be your best choice.

Features:
Highly Accurate Encoder Adjustment: Just press the voltage or current encoder knob of the DC power supply to switch between each digit, and then turn the knob to set each digit in the range of 0-9, you can directly and accurately set the voltage or current you want. It is more precise and convenient than traditional knobs.
Output Switch Control: In the process of using the variable power supply, you can adjust the voltage and current you need by pressing the output button at any time. This design can prevent you from damaging the appliance because you forget to disconnect the output. Effectively improve your experiment efficiency.
Automatic Power Calculation: The bench power supply will automatically calculate the power based on the voltage and current, and display the voltage, current and power on the high-definition four-digit digital display. The accuracy is 0.01V, 0.001A. The bright digital display allows you to use the bench power supply in a dim environment.
Short Circuit Alarm: When the load equipment fails and short-circuits, the adjustable dc power supply will emit a buzzer alarm. Prevent excessive output current from damaging the load equipment. In addition, it has multiple protections, such as grounding wire, leakage protection, thermal protection, voltage overload, power supply overload, etc.


Packaging and After-Sales:

1 x Wanptek DC Power Supply,
1 x Output Power Cord,
1x Input Power Cord,
1 x User Manual.
Size is 7.48*3.54*5.90 inches, Weight is 2.46lb.


Note: If you have any technical questions about our power supply, please do not hesitate to contact us.

*Low Voltage Power Supply (Fixed & Variable) upto 300V & 5 amp
*High Voltage Power Supply (Fixed & Variable) upto 15kv, 15ma as per customers requirements
*Load & line regulation from 0.05% to 1% as per customers requirement
*Ripple - better than 50 mv.r.s.m