The intersecting line cutting machine is a kind of equipment that can automatically complete the cutting of the intersecting line ends, intersecting line holes, and pipe elbows (shrimp joints) of metal round tubes, square tubes or special-shaped tubes. The intersecting line cutting machine auxiliary design programming software used with this equipment is also a very important core accessory.
Table, wire cutting frames size depends on the rectangle or square soap block size
Raw Material Used: Cast Iron, Mild Steel and Stainless Steel if required
Hand Operated
Cuts soap blocks into slabs, slabs in to bars and bars in to cakes in three operation
Gives fine accurate cuts
Simple in operation and effortless cutting
Meant for mass production
Cutting operation performed by wire
Bearing & Double Gearing System for effortless feeding the soap toward the wire cutting frames
Extra wire cutting frames to buy for cutting various dimensions and grams of soaps
The whole Block is cut into Slabs in 1sttable wire frame, then spinning the pusher wheel for the Slabs on the machine table for 2nd operation to cut Slabs into Bars & by 3rd operation the bars will cut into Cakes of required size.
The mechanism for pushing the Soap forward is arranged by means of Rack & Pinion
The cut is clean and sharp
For smooth operation the gear arrangement is provided
This range of Soap Cutting Machineries can be availed in single/double/three table based design choice and mechanical/manual controlling mode based specifications. These equipment comprise of standard components like PLC controller, servo drive, servo motor, electrical parts and angle encoder. All the contact accessories of these Soap Cutting Machineries are made of 304 grade stainless steel to maintain required hygiene. Belt conveyor type motor of these equipment requires 0.55 kW power to function. Offered in three phase design, these systems have long working life. Standard of these equipment has been verified on the basis of their service life, production method and user friendliness.
Raw Material Used: Cast Iron, Mild Steel & Stainless Steel
Hand operated
Cuts soap slabs into bars and cakes
Gives fine accurate cuts
Simple in operation and use
Easy to maintain
Cutting operation performed by wire
Bearing & Double Gearing System for hassle free feeding the soap toward the wire cutting frames
The mechanism for pushing the Soap forward is arranged by means of Rack & Pinion
The cut is clean and sharp
For smooth operation the gear arrangement is provided
Three Cutting Machine No. E-4 (Mild Steel Contact Parts)
Size: Standard.
Raw Material Used: Cast Iron & Mild Steel.
Hand Operated.
Cuts Soap Slabs into Bars and Cakes in Three Operation, Gives Fine Cuts, Simple in Operation and Use.
Meant for Mass Production.
Cutting Operation Performed by Wire.
Bearing & Double Gearing System.
The mechanism for pushing the Soap forward is arranged by means of Rack & Pinion.
Wire Type Cutting Machine is used for Toilet soaps, Oil Soaps, Laundry Soaps Manufacturers and other applicable industries
Size: Standard.
Raw Material Used: Cast Iron & Mild Steel.
Double Cutting Machine is used for cutting Soap Slabs into Bars & Bars into Cakes respectively and also used for cutting finished
Bars in to Cakes of any length that may be required.
Machine is very easy in operation and simple to understand.
The whole Block is cut into Slabs by means of Hand Cutter No. F-3 (TEMPLATE) then put the Slabs on the machine table i.e. for
2nd operation to cut Slabs into Bars & by 3rd operation the bars will cut into Cakes of required size. The mechanism for pushing
the Soap forward is arranged by means of Rack & Pinion. The cut is clean and sharp. Gear arrangement is provided for smooth
operation.
Meant for Mass Production up to 5000 Kg.
Cutting Operation Performed by Wire.
Bearing & Double Gearing System.
Wire Type Cutter is used for Toilet soaps, Oil Soaps, Laundry Soaps Manufacturers and other applicable industries.
Size: Standard.
Raw Material Used: Cast Iron & Mild Steel.
Hand Operated.
For Cutting Soap Slabs into Bars and Cakes.
Gives Fine Cuts
Simple in Operation and Use.
Cutting Operation Performed by Wire.
Bearing & Double Gearing System.
The mechanism for pushing the Soap forward is arranged by means of Rack & Pinion.
Wire Type Cutter is used for Toilet soaps, Oil Soaps, Laundry Soaps Manufacturers and other applicable industries.
Colloidal mill machine is a mechanical equipment that uses a combination of shearing, grinding, and high-frequency vibration to finely grind and homogenize materials. Its core components consist of stainless steel dynamic and static grinding discs, which achieve material refinement through high-speed relative motion.
Use for :
Food industry: homogenization of dairy products, grinding of chocolate, emulsification of jam/peanut butter, processing of bone paste, etc.
Chemical industry: pigment dispersion, lubricant homogenization, emulsified asphalt preparation, etc.
Pharmaceutical industry: ointment mixing, vaccine emulsification, oral liquid homogenization, etc.
Daily chemical industry: cosmetics emulsification, toothpaste grinding, detergent dispersion, etc.
Other fields: dispersion of architectural coatings, pulp processing in the paper industry, crushing of lithium battery base materials, etc.
Capacity are different . Capable of high rotational speed (such as 14000rpm) and ultra refinement (particle size 5-10 m)
Welcome cooperate!
Ultralfine grinding mill machine pulverizer ,Widely used for ultrafine grinding of dry materials in various industries such as traditional Chinese medicine, western medicine, pesticides, biology, cosmetics, food, feed, chemical industry, ceramics, etc. Especially for fibrous and high toughness materials such as cordyceps, tea, and lingzhi, the crushing effect is more perfect.
Crushing particle size 1-75um ,capacity 70-10000kg/hour.
Welcome cooperate!
