Waste plastic pyrolysis to oil plant working process:
Feed waste plastic into the reactor with auto-feeder, seal the reactor gate and begin to heat the reactor by burning fuel materials in the combustion system, the fuel material can be coal, wood, natural gas and fuel oil. There is a thermocouple installed at the oil gas outlet valve to test the temperature of the oil gas, when thermocouple shows a certain temperature, the oil gas will come out and flow into the cooling system and be converted into liquid oil. At the same time, the oil gas conations CH4, C2H6, C3H8, C4H10 and H2 which cannot be cooled under normal pressure will be recycled back to combustion system to burn as fuel material. The dust and sulfur gas will be removed by the dust removing system. After the gas oil run out, there are slags (carbon black) inside of the reactor,.
As a plastic pyrolysis machine manufacturer-DOING will provide customer a good quality machine with adopt fully automatic vacuum carbon black discharging system that extend the service time.
Choosing the suitable raw material is important for customers, it concerns the real profit you can get from your material. Not all kinds of waste plastic can get oil, if you want to get crude fuel oil with high oil yield from waste plastic, please refer to the following form: Here I need to stress that the oil rate only for your reference, as different plastic different result, such as some plastic has very dirty slag, and the plastic is very wet. Let’s see it:
Oil rate from different kinds of plastic:
This project widely used by all over the world, such as recycling center, waste plastic recycling organization, collecting company etc. Waste plastic pyrolysis oil plant has the advantage of small investment and quick recovery costs, is a very good project in the next 5-10 years. If you want to know more information about details, please contact with us.
Dy-6t capacity waste plastic pyrolysis to oil plant (d2200mm*l6000mm)
1. This mode of waste plastic pyrolysis to oil plant can load 6 tons of plastic.
2. After finishing one batch, with auto-feeder, you don't need to wait the pyrolysis machine cooling down since workers will have to go inside to feed material. If you don't have one, in that way it will be time-wasting and dangerous.
3. Built-in spiral plates, these plates will make the waste plastic go ahead.
Dy-8t capacity waste plastic pyrolysis to oil plant (d2200mm*l6600mm)
1. It can load 8 tons of waste plastic.
2. The reactor adopts q245r steel plant and its thickness is 16 mm, which can bear 500-750 batches.
3. We can also make reactor by material q245r, which obviously prolong service life 3-5 times.
4. The reactor has two layers, the outer layer built-in cotton insulation, fire cement and steel.
Dy-10t capacity waste plastic pyrolysis to oil plant (d2600mm*l6600mm)
1. Working with auto-feeder, it is able to contain 10 tons or 12tons waste plastic.
2. The diameter of feeding port is 1200mm or 1400mm.
After 2 hours feeding time, it's time to heat the reactor by coal/wood/natural gas/crude oil. Generally speaking, when the temperature ups to 155 celsius degrees around, the oil gas will generate.
Waste plastic working time you may need:
Let’s take 10 tons waste plastic that processed by doing waste plastic pyrolysis to oil plant as an example:
Model Feeding Processing Cooling Discharge Total
2200*6000 1.5hr 7-8hr 1.5hr 1.5hr 12hr
2200*6600 1.5hr 8hr 1.5-2hr 1.5hr 14hr
2600*6600 2 hr 10 hr 2-3 hr 2-3 hr 16-18 hr
Waste plastic pyrolysis to oil plant is a very good investment, not only can efficiently deal with a large number of abandoned tyres, turn waste into treasure, but also can avoid environmental pollution caused by landfill or burning these waste.
Waste tyre to oil recycling process pyrolysis plant the obtain thing as follows: 45%-55% fuel oil, 10%-15% steel wire, 30%-35% carbon black and 8%-10% flammable gas. You can get diesel from fuel oil by distillation plant.www(dot)wastetireoil(dot)com
You can get a very high profit by disposing these wastes, and also it's helpful for improving the local environment, avoid garbage pollution.
Waste tyre to oil recycling process pyrolysis plant advantages:
1. One week installation:no need to build foundation thus shorten
the construction period, 4th and 5th machine installation period is one month, 6th machine install only need one week. Also easy to move.
2. Service life: Special design inside the reactor to avoid direct www(dot)wastetireoil(dot)com
heating, so machine service life prolong to 3-5 times and the heating energy can realize 100% utilization.
3. De-dusting system: "Four in one" de-dusting system can reach
European standard, 100% environmental friendly.also no need building the water pool, saving cement, brick cost, saving time.
4. Cooling system:
A. 36 meters cooling condenser pipe, inner each pipe have 4 small pipe, cooling performance is very good.
B. "Four in one" condensing systems.
Waste tyre to oil recycling process pyrolysis plant final product application
Fuel oil
1. As the fuel material used in Cement factory, glass factory, ceramic factory, electric power factory, steel making factory, boiler factory, etc.
2. Final diesel come out from our distillation plant and deodorant
& decolorant can be used in diesel generator.
3. Used in diesel powered cars, such as vans, truck, tractor, etc.
4. Use as heating oil, industrial and home.
Carbon black :www(dot)wastetireoil(dot)com
1. Make it to briquette for fuel.
2. Used in rubber and painting factory after carbon black grinding to 200-4000 mesh.
Steel wire:Sell to iron and steel factory
(you can take out steel wire from tyre before pyrolysis)
Waste gas:
1. Recycled into furnace heating reactor instead of coal/wood/oil/natural gas.
2. Storage the exceed gas to restart the next batch.
Nowadays, many people advocate the “green” living, which is approved many people. So it is better to shred, melt and repurpose all these plastic materials instead of throwing away the waste plastic to pollute the environment.
Therefore, doing makes great efforts to develop and manufacture the used of plastic waste recycling machine, which is very popular after it comes into being. The used of plastic waste recycling machine is a great recycling machine which is can be widely applied to large-scale, large-volume recycling of post-consumer, post-commercial, and post-industrial plastic scrap. The used of plastic waste recycling machine is mainly used to reprocess plastic and make the material reusable for another product.
