Wisely fiber laser marking machine is suitable for metal fiber laser marking and most non-metal fiber laser marking, especially suitable for some fields required more precise and higher smoothness, such as stainless steel, qr code, etc.
Application industries:
Machine size¡êo850*680*1600mm
Package size:950*780*1700mm
Package carton:international standard polywood packing
1. High accuracy--hiwin/pmi linear guide rail from taiwan.
2. Beijing reci laser tube and power supply, long life, perfect cutting/engraving effect and strong power.
3. Four kinds of table: motorized up/down flatbed table, fixed honeycomb table, fixed flatbed table & fixed knife table.
4. Online & offline operation: to transmit data from pc to machine by usb cable or transmit by flash memory disk.
5. High rigidity--the thickness of the machine body is 2.0mm, the shape will not change within 30 months.
6. Usb 2.0 interface, steady and quick transmitting speed, suitable for desktop pc or laptop.
7. Three kinds of software to output data: lasercutengrave, autocad and coreldraw.
8. Dsp control system.
9. Massive memory capacity: standard allocation of 128mb inner memory capacity.
10. Large-size machine can adopt two laser tubes to raise efficiency.
11. Ce certificate, iso9001: 2008, fda.
12. High cutting/engraving speed with servo motor from mitsubishi/panasonic in japan--optional.
Wisely diode laser marking machine is designed for small gifts.
1. Automobile parts: pistons and rings, gears, shafts, bearings, clutch, lights, etc.
2. Electronic components: resistors, capacitors, chips, printed circuit boards, computer keyboard, etc.
3. Mechanical parts: bearings, gears, standard parts, motor, etc.
4. Instrument: panel board, nameplates, precision equipment, etc.
5. Hardware tools: knives, tools, measuring tools, cutting tools, etc.
6. Daily necessities: handicrafts, zipper, key holder, sanitary ware, etc.
Machine features:
For this desktop diode end-pump laser marking machine, it has:
1. Small size, can be operated on the office desk.
2. Low power consumption, less than 200w/hour.
3. Usb 2.0 interface connection - will work with a laptop.
4. Free of maintenance within 15000 hours, very low operation cost.
5. Easy and convenient operation, an operator can be productive within 2 hours.
6. Pilot light pointer to preview the path of laser beam and indicate the focus point.
7. Compatibility - the control software supports coreldraw, autocad, photoshop, etc.
8. Air-cooled system - no need for a water chiller and the associated noise and maintenance.
9. X, y and z axis adjustable working table--easy to focus and locate the material in the optimum position.
10. With more than 45% high optics-optics conversion efficiency, power consumption is decreased significantly.
11. Through using the diode end-pumped laser device, the laser beam has the best transmiting mode and will deliver perfect marking effects which the yag lamp-pump laser and diode side-pumped laser can not achieve.
Package:plywood case
Package size: 720mm*260mm*650mm
Gross weight: 40-53kg
The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.
1. Lightweight,energy-saving and maintenance-free Integrated air-cooled structure. Volume only 0.15m�³.
2. 6 preset cleaning processes+ 3 custom ones Corresponding to different usage requirements. Simple operation.
3. Double-wobble Cleaning Head Scanning width up to 190mm.
4. 8 Light Modes Meet various operation requirements.
5. High Power Density and Strong Output.Energy is twice that of ordinary models, effectively addresses issues of difficult cleaning and inefficiency.
Application materials:
Many type of metals: gold, silver, stainless steel, copper, aluminum, chrome brass, etc
Alloy and metal oxides: anodized aluminum
Some non-metallic materials & special surface treatment:silicon wafer, poly urethane, ceramics, plastic, rubber, epoxy resin, pvc, pc, abs, coating film etc.
Application industry:
1.Electrical engineering and electrical part and component
2.Mobile (cover, battery, keyboard, iphone case)
3.Jewelry(ring, pedeant, bracelet), eyeglass, clocks and craft
4.Building materials, pvc pipe
5.Car motor car spare part, instrument and meters and cutting tool
6.Plastic case, aviation and aerospace,
7.Military product, hardware fitting and accessory, sanitary appliance
8.Food and beverage , medicine package and medical instrument, solar pv industry
Parameters:
Modellp-mf10w/20w/30w/50w
Laser power10w20w30w50w
Laser wavelength1064nm
Q-frequency20khz~30khz
Divergence0.3mard
Marking range110*110mm
Minimum line width0.02mm
Minimum character0.15mm
Marking depth0 ~0.5mm
Engraving line speedâ?¤7000mm/s
Repeatability accuracy0.001mm
Beam qualitym2:1.2~1.8
Marking formatgraphics, text, bar codes, two-dimensional code, automatically
Marking the date, batchnumber, serialnumber, frequency, etc.
Graphic format supportedbmp, jpg, gif, tga, png, tif, ai, dxf, dst, plt, etc.
Working voltage220v10%/50hz/4a
Unit power100000 hours
Power
20w/30w
Laser wavelength
1064nm
Marking area
150mm*150mm
Optional marking area
50mm*50mm / 100mm*100mm / 200mm*200mm
Marking depth
¡¡§11mm
Marking speed
7000mm/s
Minimum line width
0.015mm
Minimum character
0.2mm
Repeated precision
¡¡§¡è0.003mm
Fiber laser source
Raycus from china
Scan head
Galvo tech or centurysunny from china
Controller (software--ezcad)
Jcz from china
Life-span of fiber laser module
100 000-200 000 hours
Beam quality
M2 <1.6
Focus spot diameter
<0.01mm
Output power of laser
10%~100% continuously to be adjusted
Output frequency of laser
20khz~80khz continuously to be adjusted
Power stability (8h)
<¡¡§¡è1.5%rms
System operation environment
Windows xp / windows 7-32bits
Cooling mode
Air cooling--built-in
Temperature of operation environment
15¡æ~35¡æ
Voltage
220v / 50hz / 1-ph or 110v / 60hz / 1-ph
Power requirement
<500w
Computer requested
This type does not include the computer
Dimension (l*w*h)
550mm*750mm*750mm
Package size
980mm*600mm*980mm
Net weight
90kg
Gross weight
150kg
Fiber laser marking machines
TypeKfp simple, kf1 universal, kf2 universal, kfa advanced
Laser type/wavelength Ylp/1064nm
Laser power 10w 20w 30w50w
Beam quality m2<3
Pulse width ¡¨¹100ns
Pulse repetition frequency 20khz ~ 200khz
Power stability >4h+/-2% rms
Laser mode Tem00
Marking size 100mm x 100mm
180mm x 180mm or order
Marking depthAdjustable
Marking speed 250character/s
Marking width min 0.03mm(30|¨¬m)
Marking character min 0.3mm
Repeat marking accuracy ¡¨¹10|¨¬/rad
Power total ¡¨¹800w
Power supply Ac 220v/50hz
Outsize(difference by types) 570*840*1240mm
Advantages:
1.The air cooling system, no need of maintenance;
2.Stable performance, the life time can be up to 100000 hours;
3.All kinds of metal materials and some kinds of non-metallic material marking; can be used for deep marking, the applicability is very widely;
4.With the computer, can freely change the marking and parameters;
5.The laser spot is small, can marking a fine, unique and never wear marks.
Applications:
1.Areas with depth, smoothness, and finer requirements;
2.Mobile phone keypad, plastic translucent keys;
3.Electronic components, integrated circuits (ic), pcb;
4.Electrical appliances, communication products, signage;
5.Sanitary ware, hardware products;
6.Tool accessories, precision instruments;
7.Pvc pipe, medical equipment and other industries.
