Micro flame generator, also named oxyhydrogen flame polisher and polishing machine, is a portable gas generator producing mixed oxygen and hydrogen gases cheaply from distilled water.The mixes gases can not only give an extremely hot flame with temperature up to 2800 degree centigrade from pen size torches, but one which is sufficiently clean to ensure that the work piece is not contaminated.No gas storage, safe and reliable.
This unit is supplied with 1 hand torch and four different torch tips.
Micro flame generator uses low voltage electricity to dissociate distilled water into mixed hydrogen and oxygen gases which is mainly used in polishing and welding.
Model:105t
Gas output: 100 liter/hour
Water consumption: 30 milliliter/hour
Power rating: 300 watt/hour
Power supply: 110v-240v;50hz-60hz
Weight:14kg
Size: 44cm*31cm*54cm
Lower daily running cost- only water and electricity
Size: 44cm*31cm*54cm
Weight: 14kg
Newly type of micro flame welder has been used the most advanced technology(Its electrolytic voltage is DC 24V, and electrolytic current is DC 13A,which reduces power supply?s breakdown.
special features of micro flame welder
1.energy-saving: consume water and electricity; electrolysis water into hydrogen and oxygen gases; use hydrogen and oxygen as source of flame replacing LPG, propane,acetylene fuel,natural gas or other fuel.
2.environmental-friendly and safe: output of hydrogen oxygen flame burning is only water vapor with on smell or no pollution.
3.five safety elements: automatic air switch, non-return valve, auto-pressure release valve,flashback arrestor, flame torch with anti-flashback device.
4.gas production can be adjustable. ( through rotati ng the black knob in front outer shell.)
5.water-lacking alarm for feeding cell to inform operator to add water into the machine once waterline is lower than 30% of the sight tube.
6.external flashback a
rrestor
can be disassemble,cleanable and reusable.
7.LCD screen shows total gas output per hour,and electrolytic current of each electrolytic cell circularly.
8.detachable electrolytic cells; broken electrolytic cell can be replaceable easily.
applications of micro flame welder
1.precise welding
In electronic industry, for welding enameled wires ( copper wires), flame welding circuit board, thermocouple and platinum resistor leading wires.
In medical industry,for denture welding, welding metal fitting and mending sand holes in dentistry, no carbon flame disinfection and glass seal
In laboratory, for welding of laboratory teaching,providing convenient,safe and clean hydrogen oxygen flame.
2.jewelry industry
Gold,silver,platinum,copper jewelries,accessories,ornaments,decorations melting,welding,and so on.
3. heating and sealing
glass or quartz glass tubes sealing ; ampule bottles sealing
4. acrylic/organic/perspex/plastic industry
ideal tool for polishing irregular surfaces,curved and tilted surfaces,edges,holes and inner corner surfaces of acrylic/organic/perspex/plastic sheets,signs,trophies and other art wares, and make these rough edges and hard to reach places much more clear and transparent.
5.other welding
instrument welding,small copper pipes welding,fishhook welding,storage battery tinplate welding
6.carbon cleaning and saving oil for cars and boats ... ?
Micro flame welder, also named, hydrogen oxygen flame welder or water welding machine, is an ideal, safe, reliable, effective and environmental way of welding metal wires, enameled(lacquered)copper wires, melting and processing gold, platinum jewelry or other metal ornament, sealing small glass bottles or quartz glass tubes and so on.
Working principle of micro flame welder is electrolysis of water produces mixed hydrogen and oxygen gases.Ignite the gases in the flame torch tip, and use the clean, still and concentrated flame for micro welding, soldering, melting, car engine carbon-cleaning and so on.
Three operators can work simutenously using one 305t
305t belongs to industrial type and can bear heavy working load.There is one electrolytic cell and one feeding cell inside the machine.And also it has an independent flashback arrestor, flame torch with anti-flashback device, and led digital screen display which s
hows gas output and electrilytic current clearly. And there is an current-adjusting rotary valve, which can be adjusted to keep the machine working all the time without auto-stop, and also there is water-leaking alarm which alarms once waterline is near the feeding-line.
Applications:
Polishing uneven and hard-to-reach area of acrylic products and acrylic parts without any residue, such as acrylic sheets, signs and acrylic lettering
Welding metal wires, especially enameled copper wires in electric motors and transformers
Melting and fusing of gold, silver, platinum, and their spots and face welding
Sealing small quartz glass bottles and ampules
Spot annealing of small parts in all metals
Welding, cutting and drilling of very thin metals
Welding copper tubes
Car engine carbon cleaning
Produce hho gases 300 liter/hour automatically
Size: 67cm*31cm*54cm
Weight:22kg
Micro flame welder, also named hydrogen oxygen flame welder or water welding machine, is an ideal, safe, reliable, effective and environmental way of welding metal wires, enameled(lacquered)copper wires, melting and processing gold, platinum jewelry or other metal ornament, sealing small glass bottles or quartz glass tubes and so on.
Working principle of micro flame welder is electrolysis of water produces mixed hydrogen and oxygen gases.Ignite the gases in the flame torch tip, and use the clean, still and concentrated flame for micro welding, soldering, melting and processing.
Model:405t
Gas output: 400 liter/hour
Size: 77cm*30cm*54cm
Weight:26kg
Six operators can work simutenously using one 405t
405t belongs to industrial type and can bear heavy working load.There is four electrolytic cells and one feeding cell inside the machine.And also it has an independent flashback arrestor, flame torch with anti-flashback device, and led digital screen display which shows gas output and electrilytic current clearly. And there is an current-adjusting rotary valve, which can be adjusted to keep the machine working all the time without auto-stop.
Produce hho gases 400 liter/hour
Size:76cm*31cm*54cm
Weight:26kg
Micro flame welder, also named hydrogen oxygen flame welder or water welding machine, is an ideal, safe, reliable, effective and environmental way of welding metal wires, enameled(lacquered)copper wires, melting and processing gold, platinum jewelry or other metal ornament, sealing small glass bottles or quartz glass tubes and so on.
Working principle of micro flame welder is electrolysis of water produces mixed hydrogen and oxygen gases.Ignite the gases in the flame torch tip, and use the clean, still and concentrated flame for micro welding, soldering, melting and processing.
Model:605t
Gas output: 600 liter/hour
Size: 102cm*30cm*54cm
Weight:34kg
Twelve operators can work
605t belongs to industrial type and can bear heavy working load.There is six electrolytic cells and one feeding cell inside the machine.And also it has an independent flashback arrestor, flame torch with anti-flashback device, and led digital screen display which shows gas output and electrilytic current clearly. And there is an current-adjusting rotary valve, which can be adjusted to keep the machine working all the time without auto-stop.
Produce hho gases 600 liter/hour
Size:105cm*31cm*54cm
Weight: 35kg
Micro flame welder, also named, hydrogen oxygen flame welder or water welding machine, is an ideal, safe, reliable, effective and environmental way of welding metal wires, enameled(lacquered)copper wires, melting and processing gold, platinum jewelry or other metal ornament, sealing small glass bottles or quartz glass tubes and so on.
Working principle of micro flame welder is electrolysis of water produces mixed hydrogen and oxygen gases.Ignite the gases in the flame torch tip, and use the clean, still and concentrated flame for micro welding, soldering, melting, car engine carbon-cleaning and so on.
Model: 205t
Gas output: 200 liter/hour
Water consumption: 60 milliliter/hour
Power rating: 800 w/hour
Power supply: 110v-240v/50hz-60hz
Gross weight: 17kg
Size: 52cm*31cm*54cm
Two operators can work simultaneously using one 205t
Newly type of micro flame welder has been used the most advanced technology(Its electrolytic voltage is DC 24V, and electrolytic current is DC 13A,which reduces power supply?s breakdown.
special features of micro flame welder
1.energy-saving: consume water and electricity; electrolysis water into hydrogen and oxygen gases; use hydrogen and oxygen as source of flame replacing LPG, propane,acetylene fuel,natural gas or other fuel.
2.environmental-friendly and safe: output of hydrogen oxygen flame burning is only water vapor with on smell or no pollution.
3.five safety elements: automatic air switch, non-return valve, auto-pressure release valve,flashback arrestor, flame torch with anti-flashback device.
4.gas production can be adjustable. ( through rotating the black knob in front outer shell.)
5.water-lacking alarm for feeding cell to inform operator to add water into the machine once waterline is lower than 30% of the sight tube.
6.external flashback arrestor can
be disassemble,cleanable and reusable.
7.LCD screen shows total gas output per hour,and electrolytic current of each electrolytic cell circularly.
8.detachable electrolytic cells; broken electrolytic cell can be replaceable easily.
applications of micro flame welder
1.precise welding
In electronic industry, for welding enameled wires ( copper wires), flame welding circuit board, thermocouple and platinum resistor leading wires.
In medical industry,for denture welding, welding metal fitting and mending sand holes in dentistry, no carbon flame disinfection and glass seal
In laboratory, for welding of laboratory teaching,providing convenient,safe and clean hydrogen oxygen flame.
2.jewelry industry
Gold,silver,platinum,copper jewelries,accessories,ornaments,decorations melting,welding,and so on.
3. heating and sealing
glass or quartz glass tubes sealing ; ampule bottles sealing
4. acrylic/organic/perspex/plastic industry
ideal tool for polishing irregular surfaces,curved and tilted surfaces,edges,holes and inner corner surfaces of acrylic/organic/perspex/plastic sheets,signs,trophies and other art wares, and make these rough edges and hard to reach places much more clear and transparent.
5.other welding
instrument welding,small copper pipes welding,fishhook welding,storage battery tinplate welding
6.carbon cleaning and saving oil for cars and boats ...
tech data of micro flame welder-105T
power input: AC 220V�10% or AC 110V�10%
frequency: 50HZ/60HZ
gas output: =100 L/H
electrolytic cell volume: 1.8 L
feeding cell volume: 1.2 L
max. water adding: 2.4 L
no.of electrolytic cell: 1
no.of feeding cell: 1
gross size: 44 cm � 31 cm � 54 cm
gross weight: 14 kg
tech data of micro flame welder-205T
power input: AC 220V�10% or AC 11
0V�10%
frequency: 50H Z/60HZ
gas output: =200 L/H
electrolytic cell volume: 3.6 L
feeding cell volume: 1.5 L
max. water adding: 4.2 L
no.of electrolytic cell: 2
no.of feeding cell: 1
gross size: 53 cm � 31 cm � 54 cm
gross weight: 17 kg
tech data of micro flame welder-305T
power input: AC 220V�10% or AC 110V�10%
frequency: 50HZ/60HZ
gas output: =300 L/H
electrolytic cell volume: 5.4 L
feeding cell volume: 1.8 L
max. water adding: 6.3 L
no.of electrolytic cell: 3
no.of feeding cell: 1
gross size: 65 cm � 31 cm � 54 cm
gross weight: 22 kg
tech data of micro flame welder-405T
power input: AC 220V�10% or AC 110V�10%
frequency: 50HZ/60HZ
gas output: =400 L/H
electrolytic cell volume: 7.2 L
feeding cell volume: 2.2 L
max. water adding: 8.4 L
no.of electrolytic cell: 4
no.of feeding cell: 1
gross size: 77 cm � 31 cm � 54 cm
gross weight: 26 kg
tech data of micro flame welder-605T
power input: AC 220V�10% or AC 110V�10%
frequency: 50HZ/60HZ
gas output: =600 L/H
electrolytic cell volume: 10.8 L
feeding cell volume: 3.6L
max. water adding: 12.6 L
no.of electrolytic cell: 6
no.of feeding cell: 1
gross size: 107 cm � 33 cm � 56 cm
gross weight: 47 kg
Newly type of water welding machine has been used the most advanced technology(Its electrolytic voltage is DC 24V, and electrolytic current is DC 13A,which reduces power supply breakdown.
special features of water welding machine
1.energy-saving: consume water and electricity; electrolysis water into hydrogen and oxygen gases; use hydrogen and oxygen as source of flame replacing LPG, propane,acetylene fuel,natural gas or other fuel.
2.environmental-friendly and safe: output of hydrogen oxygen flame burning is only water vapor with on smell or no pollution.
3.five safety elements: automatic air switch, non-return valve, auto-pressure release valve,flashback arrestor, flame torch with anti-flashback device.
4.gas production can be adjustable. ( through rotating the black knob in front outer shell.)
5.water-lacking alarm for feeding cell to inform operator to add water into the machine once waterline is lower than 30% of the sight tube.
6.external flashback arrestor can be disassemble,cleanable and reusable.
7.LCD screen shows t
otal gas output per hour,and electrolytic current of each electrolytic cell circularly.
8.detachable electrolytic cells; broken electrolytic cell can be replaceable easily.
applications of water welding machine
1.precise welding
In electronic industry, for welding enameled wires ( copper wires), flame welding circuit board, thermocouple and platinum resistor leading wires.
In medical industry,for denture welding, welding metal fitting and mending sand holes in dentistry, no carbon flame disinfection and glass seal
In laboratory, for welding of laboratory teaching,providing convenient,safe and clean hydrogen oxygen flame.
2.jewelry industry
Gold,silver,platinum,copper jewelries,accessories,ornaments,decorations melting,welding,and so on.
3. heating and sealing
glass or quartz glass tubes sealing ; ampule bottles sealing
4. acrylic/organic/perspex/plastic industry
ideal tool for polishing irregular surfaces,curved and tilted surfaces,edges,holes and inner corner surfaces of acrylic/organic/perspex/plastic sheets,signs,trophies and other art wares, and make these rough edges and hard to reach places much more clear and transparent.
5.other welding
instrument welding,small copper pipes welding,fishhook welding,storage battery tinplate welding
6.carbon cleaning and saving oil for cars and boats ... ...
tech data of water welding machine-305T
power input: AC 220V�10% or AC 110V�10%
frequency: 50HZ/60HZ
gas output: =300 L/H
electrolytic cell volume: 5.4 L
feeding cell volume: 1.8 L
max. water adding: 6.3 L
no.of electrolytic cell: 3
no.of feeding cell: 1
gross size: 65 cm � 31 cm � 54 cm
gross weight: 22 kg
tech data of water welding machine-105T
power input: AC 220Vï10% or AC 110Vï10%
frequency: 50HZ/60HZ
gas output: =100 L/H
electrolytic cell volume: 1.8 L
feeding cell volume: 1.2 L
max. water adding: 2.4 L
no.of electrolytic cell: 1
no.of feeding cell: 1
gross size: 44 cm ï 31 cm ï 54 cm
gross weight: 14 kg
tech data of water welding machine-205T
power input: AC 220Vï10
% or AC 110Vï10%
frequency: 50HZ/60HZ
gas output: =200 L/H
electrolytic cell volume: 3.6 L
feeding cell volume: 1.5 L
max. water adding: 4.2 L
no.of electrolytic cell: 2
no.of feeding cell: 1
gross size: 53 cm ï 31 cm ï 54 cm
gross weight: 17 kg
tech data of water welding machine-305T
power input: AC 220Vï10% or AC 110Vï10%
frequency: 50HZ/60HZ
gas output: =300 L/H
electrolytic cell volume: 5.4 L
feeding cell volume: 1.8 L
max. water adding: 6.3 L
no.of electrolytic cell: 3
no.of feeding cell: 1
gross size: 65 cm ï 31 cm ï 54 cm
gross weight: 22 kg
tech data of water welding machine-405T
power input: AC 220Vï10% or AC 110Vï10%
frequency: 50HZ/60HZ
gas output: =400 L/H
electrolytic cell volume: 7.2 L
feeding cell volume: 2.2 L
max. water adding: 8.4 L
no.of electrolytic cell: 4
no.of feeding cell: 1
gross size: 77 cm ï 31 cm ï 54 cm
gross weight: 26 kg
tech data of water welding machine-605T
power input: AC 220Vï10% or AC 110Vï10%
frequency: 50HZ/60HZ
gas output: =600 L/H
electrolytic cell volume: 10.8 L
feeding cell volume: 3.6L
max. water adding: 12.6 L
no.of electrolytic cell: 6
no.of feeding cell: 1
gross size: 107 cm ï 33 cm ï 56 cm
gross weight: 47 kg
