Material: fiberglass and water-activated polyurethane.
Application area: mainly used for the external fixation of fracture and common orthopedics.
Model No.: AX002 (5cm*360cm)
Size: standard or customized
Package: 10bags*12boxes/ctn
Characteristics:
1. High Strength and Light Weight.
2. Quick Solidifying and Good Mouldability.
3. Easy Operating.
4. Excellent X-ray Radiolucency.
5. Good Air-permeability.
6. Water-resistant.
7. Environment Friendly Materials.
Operation:
1. Wear the gloves and choose the proper specifications.
2. Use the cast padding or stockinet on the fixed part.
3. Open a bag and take out the cast, Immerse in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water.
4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position.
5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength.
6. Use the electric cast saw to cut and remove it.
Notes:
1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin.
2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength.
3. The cast need to be cut and removed by the electric cast saw.
4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify.
Storge:
Be careful not to break the package
Storage at room temperature
The shelf-lift: 2 years
Material: fiberglass
Application area: mainly used for the external fixation of fracture and common orthopedics.
Model no.: ax005 (12.5cm*360cm)
Size: standard or customized
Package: 10bags*9boxes/ctn
Characteristics:
1. High strength and light weight.
2. Quick solidifying and good mouldability.
3. Easy operating.
4. Excellent x-ray radiolucency.
5. Good air-permeability.
6. Water-resistant.
7. Environment friendly materials.
Operation:
1. Wear the gloves and choose the proper specifications.
2. Use the cast padding or stockinet on the fixed part.
3. Open a bag and take out the cast, immerse in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water.
4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position.
5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength.
6. Use the electric cast saw to cut and remove it.
Notes:
1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin.
2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength.
3. The cast need to be cut and removed by the electric cast saw.
4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify.
Storge:
Be careful not to break the package
Storage at room temperature
The shelf-lift: 2 years
Material: fiberglass and water-activated polyurethane.
Application area: mainly used for the external fixation of fracture and common orthopedics.
Model No.: AX006 (15cm*360cm)
Size: standard or customized
Package: 10bags*9boxes/ctn
Characteristics:
1. High Strength and Light Weight.
2. Quick Solidifying and Good Mouldability.
3. Easy Operating.
4. Excellent X-ray Radiolucency.
5. Good Air-permeability.
6. Water-resistant.
7. Environment Friendly Materials.
Operation:
1. Wear the gloves and choose the proper specifications.
2. Use the cast padding or stockinet on the fixed part.
3. Open a bag and take out the cast, Immerse in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water.
4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position.
5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength.
6. Use the electric cast saw to cut and remove it.
Notes:
1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin.
2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength.
3. The cast need to be cut and removed by the electric cast saw.
4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify.
Storge:
Be careful not to break the package
Storage at room temperature
The shelf-lift: 2 years
Material: fiberglass and water-activated polyurethane.
Application area: mainly used for the external fixation of fracture and common orthopedics.
Model No.: AX003 (7.5cm*360cm)
Size: standard or customized
Package: 10bags*12boxes/ctn
Characteristics:
1. High Strength and Light Weight.
2. Quick Solidifying and Good Mouldability.
3. Easy Operating.
4. Excellent X-ray Radiolucency.
5. Good Air-permeability.
6. Water-resistant.
7. Environment Friendly Materials.
Operation:
1. Wear the gloves and choose the proper specifications.
2. Use the cast padding or stockinet on the fixed part.
3. Open a bag and take out the cast, Immerse in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water.
4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position.
5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength.
6. Use the electric cast saw to cut and remove it.
Notes:
1. The operator should wear gloves to avoid the polyurethane touching and adhering the skin.
2. Open one bag at one time and use the cast immediately. Don't open multi-bags at the same time, so that to avoid weakening the strength.
3. The cast need to be cut and removed by the electric cast saw.
4. Pay attention to avoid breakage of the bags during transportation and storage, for touching moisture in the air can cause the cast to solidify.
Storge:
Be careful not to break the package
Storage at room temperature
The shelf-lift: 2 years
Description of orthopedic casting tape:
It is made of knitted fiberglass or polyester fabric, impregnated with water-activated polyurethane resin. It is used for orthopedic illness or fracture from exteral wound, to preserve fixation for swollen or wounded joint.
It is the upgraded and replaced product of the traditional plaster bandage.Age.
Advantages of orthopedic casting tape:
High strength, light weight molding fast
Good air permeability
Excellent x-ray radiolucency
Waterproof
Environmentally friendly
Simple operation
Operation of medical disposable casting tape:
1. Wear the surgical gloves and choose the proper specifications.
2. Put the cast padding or stockinet on the fixed part.
3. Open the package and take out the cast, immerse the cast in room temperature water at 3-5 seconds and press 2-3 times, take it out and squeeze out the excess water.
4. Wrap the cast spirally on injured parts with 2~3 layers, overlapping the previous layer by one-half or two- thirds the width of the roll.
5. Shape according to the need, smooth and rub the surface to achieve good contact between layers.
6. Use the electric cast saw to cut and remove it.
Certificates of orthopedic casting tape: ce & fda
Package:oem service is available
Storage & warranty:
Be careful not to break the packaging
Storage at room temperature
Shelf-lift: 2 years
Shipping: within 15 working days after payment
Exhibition:
Ansen medical is the manufacturer with 13 years experience specializing in orthopedic products, such as fiberglass casting tape, splint , also supply cast padding, stockinette, elastic bandage, crepe bandage, cohesive bandage, gloves and electric cast saw
ConMed is a global medical technology company that provides a variety of surgical and medical devices, including products in the field of orthopedics. The company offers a range of solutions for orthopedic procedures, such as arthroscopy and electrosurgery. Some of the orthopedic products provided by ConMed may include arthroscopic instruments, power systems, and other tools used in orthopedic surgeries.
A bandage is a piece of material used either to covering wounds, to keep dressings in place, to applying pressure controlling bleeding, to support a medical device such as a splint, or on its own to provide support to the body. It can also be used to restrict a part of the body.
This recertified Medical MD Oxygen Cylinder is perfect for professional or personal home oxygen use. With a 14.6 cu ft capacity,this medical oxygen cylinder is perfect for portability and smaller spaces. This lightweight, easy to transport aluminum requalified cylinder is DOT approved, and ready for medical or industrial use. It comes fitted with a CGA870 post valve installed and a freshly painted dome in a Medical Green color for easy identification.
PREMIUM CONSTRUCTION
Reconditioned
High-quality aluminum body
Clearcoat protected
Medical green rust-resistant painted dome
CGA870 medical post valve installed
Approximately 4.4â?³ in diameter x 16.3â?³ in height* (with valve)
Weighs approximately 6 pounds
Capacity 14.6 cubic foot
2015 PSI service / 3360 PSI test pressure
Stamped DOT-3AL2015
5-year retest interval
Recertified test within 180 days prior to shipment
