It consists of polymer sheet, polymer hot melt pressure sensitive adhesive layer and isolation film.
Advantage:
1. High tensile strength and high elongation.
2. Small size change rate.
3. Good low temperature flexibility.
4. Resistant to plant root penetration.
5. Eco friendly.
Application:
Basement, roof, air defense, pipe gallery and tunnel.
Jute (including kenaf) was an important foreign exchange earner for the producing countries during '60s. Even during the '70s, jute was an important commodity for most of the producing countries. However, during the '80s, bulk handling techniques and synthetic substitutes entered the market and jute started losing its predominant position in the market.
Geo Textile Netting made of Natural Coco Fiber in White or Brown Coir. (Machine or Hand woven). Used to control Soil Erosion, at work sites, road construction areas, river banks etc.. as a protective measure/Mesh. Can be used as backing for hydro seed spraying.
Specifications
Mesh Hole size : 20mm x 20mm or 30mm x 30mm or (As per buyer’s requirement for any pattern and size)
Supplied in rolls any length and any width (up to 2 meters of maximum width).
TPO waterproof coiled material, namely thermoplastic polyolefin waterproof coiled material, is a new type of waterproof coiled material made of thermoplastic polyolefin (TPO) synthetic resin combining ethylene propylene rubber and polypropylene with advanced polymerization technology and adding antioxidant, antioxidant and softener. It can be made into reinforced waterproof coiled material with polyester fiber mesh cloth as internal reinforcement material, It is a waterproof product of synthetic polymer waterproof coiled material.
Brand waterproof membrane of elastomer (SBS) modified asphalt is a kind of windable sheet waterproof material, which adopts styrene-butadiene-styrene (SBS) modified asphalt as a dipping and covering modifier, whose upper surface is coated by PE film, fine sand, mineral granules or aluminum foil, copper foils or other isolating materials.
Features
Spunbonded polyester fiber membrane;aintegrated advantage properties of spunbonded polyester substrates and SBS modified asphalt, wonderful integrated properties.
It could form waterproof layer, which has high strength and good property to stand against water pressure;
High tensile strength and elongation rate, strong adaptability for substrate shrinking distortion and cracks;
Good high and low temperature resistance, could keep its functions at -50; and be used in cold or hot areas, especially in cold areas;
Resistance to puncture, pressing and rubbing, tearing, and wearing;
Good resistance to corrosion, mildew and weathering;
Good construction performance, with firm and enduring joints.
Application Range
It could be widely used in all kinds of waterproof engineering projects in all fields, especially in the following types of engineering projects:
All kinds of building roofs engineering projects, exposed, non-exposed, heat preservation, non-heat preservation, planting building roofs and roof parking lots;
All kinds of underground waterproof or damp proof engineering projects;
Bridge surfaces of subways, tunnels, concrete roads, sewage treatment and garbage burying projects; water spraying pools, swimming pools, penstocks, water pools, and so on.
Thermoplastic Polyolefin (TPO) is a kind of polymer waterproof membrane. It can be reinforced with polyester felt and fiberglass with non-woven fabric backing, manufactured by advanced extrusion machining technology.
1)Itâ??s easy to install with good system integrity, few accessories. 2) Excellent tensile strength, tearing resistance and penetration resistance performance. 3) No plasticizer, They have been tested as having excellent resistance to thermal aging and ultraviolet, durable and exposed. 4) Hot welding. The peel strength of joint is high. 5) Fast welding speed. 6) Environment friendly, 100% recycled, without chlorine. 7) White-based light -color and smooth surface with high refection, energy saving and anti-dust function.
Waterproofing membrane is mainly used in building walls, roofs, tunnels, highways, landfill sites and other places. It is a flexible building material product that can be curled into rolls to resist external rainwater and groundwater leakage. As a non leakage connection between engineering foundation and buildings, it is the first barrier of the whole project waterproofing and plays a vital role in the whole project.
TJ 441 Self-Adhered Polymer Modified Bitumen Waterproof Membrane is based on SBS elastmoeric modified waterproof membrane,laminating with a special PET film,which can be categorized into two types--N and PY. N has PE(Polyethylene),PET,and D(Non-PET film
with adhesion in double side);PY has PE,S(sand),AL(Aluminum Foil),D;Its characteristics lie in suitable for wet substrate,no need to find flat substrate and painted surface disposal,free torch heat,integrating with the mortar or concrete perfectly. It's safe and environmental protection.
Features:
Supreme adhesion integrates with the substrate forever with special patent formula
Suitable for various substrates enables to lower resource waste massively and save the cost and time
Unique operation craft of wet treatment,free from primer,no need of heat melt
Size Available
Width-3.28ftï¼?1m
Length-32.8ft(10m) 49.2ft(15m)65.6ft(20m)
Thickness-
N(1.2mm,1.5mm,2mm)
G (2mm,3mm,4mm)
Packaging,storage and shipping
Product is packed into rolls with plastic woven bag
Avoid sunlight and rain,store it under current and dry. The temperature should lower than 50 ,putting it upright and keep the story less than 2
TJ-789 TPO Waterproof Membrane
TPO Waterproof Membrane takes TPO elastomer as base material,adding fire retardant filling,anti weathering pigment filling,anti oxidization agent and light stabilizer,through high speed mix,melting extrusion,and calendering into waterproofing sheet material. Firstly developed in the early 20 centuries,it is extensively used for rooftop waterproofing projects under the installation of mechanical fasteners. With the combination of the great anti-weathering of EPDM and the weldability of PVC sheet,it defines the leading position in waterproofing industry
TPO waterproof membrane has 0% plasticizer and no chloride,generating zero harmful gas when welding
Application: Extensively used for the waterproof projects of industrial and residential buildings and public constructions
Installation Guide
1. Substrate Requirements: Clean,no bugle and pointy object
2.Installation Steps(Mechanical Fastener)
Substrate Clean Pave PE film Pave Insulation board Pre-applied TPO Mechanical Fasten TPO Hot air Welding TPO Detailed Spots Strengthening Test Check
3. Installation
1) Clean the litters,dust on the substrate
2)Pave a layer of PE film,the overlap uses butyl adhesive tape to glue
3)Pave Extruded polystyrene foam insulation board(XPS),using exclusive fasteners to fasten the board
4)Pre-applied TPO membrane: Lay the TPO membrane on the insulation board in accordance with the snap line,paving direction should be perpendicular with the wave of profiled steel sheet,dispose the loose TOP membrane as the outline on the insulation board. Membrane remains flat and even,overlap is 12cm and appropriate trim is needed
5)Fasten the TPO membrane: Align edge of mark line 30mm install the fasteners and elastics
6)Membrane Overlap: One piece membrane laid on the other,use the automatic hot air welding machine to weld
7) Detailed Spots Strengthening: Trim adequate TPO membrane for detailed spots,use portable hot welding machine weld on the TPO membrane
8)TPO membrane edge treatment: Use batten to fasten the edge along with sealants
