Diameter: above 28mm
Length: up to 300mm
Power supply: ac380v, 50/60hz
Air supply: 0.6mp
Speed: up to 1000 pcs/h
1> the paint roller machine is one-off completion of cutting, combing, bevelling, shearing and vacuum cleaning.
2> manufacturing customized device according to different diameter and length
3> the machine only needs one person to operate.
Outline dimension: 6000mm(l) (h)mm
Diameter: above 28mm
Power: ac380v, 50/60hz
Air supply: 0.6mp
Average production speed: 2000pcs/h
1> the paint roller making machine has the combination of automatically delivering pipes, unconstant twisting, and automatically sealing, etc.
2> the paint roller making machine is equipped with heating(suitable for pp pipe, flame supervision, temperature adjustment) technology.
3> customized production according to different diameter of pipes and different length of production line
4> approximate output is up to 8 meters of wound tubes per minute.It can produce more than 16, 000 pieces of 9-inch rollers per day(8 hours working time). The gas consumption cost of 9 inches rolling brush is only 0.01 rmb.
5> compared with the similar european devices , our machine is cheaper but with high quality, short investment feedback period and low maintenance fee.
6> this paint roller making winding machine needs only one person.
Paint roller bucket
Specification:
16 litre heavy duty plastic bucket ,
Ridged inside of bucket to help even spread of paint
Strong metal handle
Size: 32 x 26.5 x 21.5cm
Outline Dimension: 3600(L)*1200ï¼?Wï¼?*1600ï¼?Hï¼?
Area for machine place at factory: 1.2x1.5+1.65m
Diameter: from 20mm to 57mm
Wound tube Length: 1.23m ~3.4m
Finished Roller Cover Length: from 3" to 10"
Power Supply: AC380V/220V,50/60HZ, 3phases
Air supply: 0.6MP
Speed: Up to 1000 pcs/H
Operator: only 1 person
Controller: touch screen
1> This paint roller finishing machine is one-off completion of Cutting, Combing, Beveling, Vacuum cleaning.
2> Manufacturing customized device according to different diameter and length
3> The paint roller finishing machine is PLC operated.
4> Fast changeovers between different inner diameter.
Outline dimension: 6000mm(L)Ã?1600mm(W)Ã?2200(H)mm
Area for machine place at factory:6x2.5m
Diameter: 15mm~ 56mm
Tube Length: 1.23m~1.85m
Power: AC380V/220V,50/60HZ, 3phases
Air Supply: 0.6MP
Average production speed: 2000pcs/H
Loader: above 100pcs (could be customized)
Operator: only 1 person
Gas consumption: 15kgs/tin for 16hours machine running
Oxygen consumption: 15mpa/tin, 4tins for 16hours machine running
1> The paint roller winding machine has the combination of automatically loading pipes, consistent continuous winding, and automatically sealing, no glue or solvents are necessary.
2> The paint roller winding machine is equipped with thermobonding / thermofusion (suitable for PP pipe,flame supervision,temperature adjustment) technology.
3> Customized production according to different diameter of pipes and different length of production line
4> Approximate output is up to 8 meters of wound tubes per minute.It can produce more than 16,000 pieces of 9-inch rollers per day(8 hours working time).
5> Compared with the similar European devices ,our machine is cheaper but with high quality, short investment feedback period and low maintenance fee.
Paint Roller Finishing Machine V2 with Adjustable Tube Length
Outline Dimension: 3600(L)*1200ï¼?Wï¼?*1600ï¼?Hï¼?
Area for machine place at factory: 1.2x1.5+1.65m
Diameter: from 20mm to 57mm
Wound tube Length: 1.23m ~3.4m, tube length could be adjustable according to different paint roller cover length.
Finished Roller Cover Length: from 3" to 10"
Power Supply: AC380V/220V,50/60HZ, 3phases
Air supply: 0.6MP
Speed: Up to 1000 pcs/H
Operator: only 1 person
Controller: touch screen
1> This paint roller finishing machine is one-off completion of Cutting, Combing, Beveling, Vacuum cleaning.
2> Manufacturing customized device according to different diameter and length
3> The paint roller finishing machine is PLC operated.
4> Fast changeovers between different inner diameter.
Upgrade feature: tube length could be adjustable according to different paint roller cover length.
Take 5" roller cover for example, if the tube length settled at 1650mm, the actual using length maybe at 1635mm afterthermobonding(expand with heat and contract with cold). So 1635mm/127mm(5")=12pcs roller cover + 111mm wastages.
However, on this upgrade machine, you could change to the most suitable and economical tube length between 1.65m to 1.85m for different roller cover length. If change the tube length to 1793mm, the actual using length comes to 1778mm after expansion and contraction, therefore, 1778mm/127mm(5")=14pcs roller cover and no wastage.
