Get into a cosy warm car and enjoy the benefits of a parking heater
Usually, in winter, when people use the car, they start the automobile, pre-heat the engine several minutes, after the car is warm people drive it. Or people use the other independent auxiliary heating method or use the city electricity to pre-heat the car. But there are some disadvantages. For example, the car can’t start, so the problem of coldness of the cab at first several minutes can’t be solved.
Car parking-heater hardly have the short comings, pre-heat the engine can reduce 90% waste gas emissions, and environmental protection, raise the fuel efficient greatly, use the car parking heater is also very economic, equals about 10% of the fuel of starting the engine, achieve the similar heating effect.
This parking heater is a set independent fuel heating system, via high-tech intelligent control, you can preheat car engine and cab without starting engine, reduce the abrasion to engine due to cold starting, prolong the working life of engine, and make a comfortable driving space.
Working Principle
This heating system uses the gas as the fuel, after heat the exchanger, the hot air through the air blower, arrives to the compartment, storehouse equipment, therefore, achieve the purpose that heats and removes the frost to them.
Scope of Application
The heater can be applied for heating the cab of the freight vehicles, vans, storage battery cars and all kings of other vehicles.
Product Advantages
Pleasant sound operation makes your drive comfortable.
Excellent independent step less heating capability
Perfect and easy control set.
Compact dimensions can be installed on any vehicles.
Diagnosis function reduces the maintenance time.
Technical Specifications
Technical Specifications
Thermal Power 2000W
Fuel Gas Diesel
Rated Voltage (V) 12V 24V
Fuel Consumption (l/h) 0.12-0.24
Rated Power (W) 9-22
Working Temperature ( ° C) -40° C -~+20° C
Weight (kg) 2.6
Dimensions L× W× H (mm) 311× 120× 121.
Working principle
The heater is connected between the vehicle engine, warm fan and water tank. When the heater is working, the cooling liquid of the engine will be circularly heated through the heater furnace cavity. In such way, the temperature of engine, warm blower, water tank and cabin will gradually increased.
Scope of application
Warming up the cab of freight vehicles and electric automobiles.
Warming up the compartment of medium coaches (iveco, ford transit etc)
In winter, the vehicles which need to maintain warmth (like transporting the vegetables, fruits etc)
Each kind of special vehicles of field work.
Warming up for each kind of ships.
Remote control
Compact structure
Remote control distance at 100m(no obstacles).
Start or close the heater at any time.
Product advantages
Do not need to start the engine, preheat the engine and compartment at the same time
Avoid attrition the engine of cold starting at low temperature
Solve the problem of eliminating the frost, snow and fog and don’t have to wear too much clothes, do not need to wait, you can drive the car immediately.
Compact structure, easy installation. Convenience service, when you buy a new car, the heater can dismantle and install on the new car.
When the car is parking, you can close the engine and start the heater, in such a way, you can save 90% fuel.
Save the fuel efficiently. According to the oil price at present market, for example, thejetta car at the -20° c, only cost less than one yuan rmb one time.
Technical specifications
Technical specifications
Thermal power 5000w
Fuel Diesel gas
Rated voltage (v) 12v 24v
Fuel consumption (l/h) 0.17-0.6
Rated power (w) 15-90
Working temperature ( ° c) -40° c -~+20° c
Weight (kg) 5.9
Dimensions l× w× h (mm) 425× 148× 162.
Car parking heater-CE standard
Working principle
This heating system uses the diesel or gas as the fuel, after heat the exchanger, the hot air through the air blower, arrives to the compartment, storehouse equipment, therefore, achieve the purpose that heats and removes the frost to them.
Scope of application
Warming up the cab of freight vehicles and electric automobiles.
Warming up the compartment of medium coaches (iveco, ford transit etc)
In winter, the vehicles which need to maintain warmth (like transporting the vegetables, fruits etc)
Each kind of special vehicles of field work.
Warming up for each kind of ships.
Product advantages
The structure is compact, the volume is small, and the installment service is convenient.
The heaters save the oil, protect the vehicle, reduce the displacement and environmental protection.
Comfortable and pleasant sound design.
Function reliable, temperature rises quickly, easy operation.
The heaters have the security and self-diagnosis function.
Technical specifications
Technical specifications
Thermal power 5000w
Fuel Diesel gas
Rated voltage (v) 12v 24v
Fuel consumption (l/h) 0.17-0.6
Rated power (w) 15-90
Working temperature ( ° c) -40° c -~+20° c
Weight (kg) 5.9
Dimensions l× w× h (mm) 425× 148× 162.
Car parking heater-CE standard
Working principle
This heating system uses the gas or diesel as the fuel, after heat the exchanger, the hot air through the air blower, arrives to the compartment, storehouse equipment, therefore, achieve the purpose that heats and removes the frost to them.
Scope of application
Warming up the cab of freight vehicles and electric automobiles.
Warming up the compartment of medium coaches (iveco, ford transit etc)
In winter, the vehicles which need to maintain warmth (like transporting the vegetables, fruits etc)
Each kind of special vehicles of field work.
Warming up for each kind of ships.
Cell phone, telephone remote control
Voice prompt control
Sms control, it can set up the start/close time
No distance, obstacles limitation
It can start the heater at any time when you need
Product advantages
Do not need to start the engine, preheat the engine and compartment at the same time
Avoid attrition the engine of cold starting at low temperature
Solve the problem of eliminating the frost, snow and fog and don’t have to wear too much clothes, do not need to wait, you can drive the car immediately.
Compact structure, easy installation. Convenience service, when you buy a new car, the heater can dismantle and install on the new car.
When the car is parking, you can close the engine and start the heater, in such a way, you can save 90% fuel.
Save the fuel efficiently. According to the oil price at present market, for example, thejetta car at the -20° c, only cost less than one yuan rmb one time.
Technical specifications
Technical specifications
Thermal power 5000w
Fuel Gas diesel
Rated voltage (v) 12v 24v
Fuel consumption (l/h) 0.17-0.6
Rated power (w) 15-90
Working temperature ( ° c) -40° c -~+20° c
Weight (kg) 5.9
Dimensions l× w× h (mm) 425× 148× 162
Working principle
This heating system uses the gas or dieselas the fuel, after heat the exchanger, the hot air through the air blower, arrives to the compartment, storehouse equipment, therefore, achieve the purpose that heats and removes the frost to them.
Scope of application
Warming up the cab of freight vehicles and electric automobiles.
Warming up the compartment of medium coaches (iveco, ford transit etc)
In winter, the vehicles which need to maintain warmth (like transporting the vegetables, fruits etc)
Each kind of special vehicles of field work.
Warming up for each kind of ships.
Timer control
Install on the panel
It can set up the start/close time; also can use the switch operation
Product advantages
Do not need to start the engine, preheat the engine and compartment at the same time
Avoid attrition the engine of cold starting at low temperature
Solve the problem of eliminating the frost, snow and fog and don’t have to wear too much clothes, do not need to wait, you can drive the car immediately.
Compact structure, easy installation. Convenience service, when you buy a new car, the heater can dismantle and install on the new car.
When the car is parking, you can close the engine and start the heater, in such a way, you can save 90% fuel.
Save the fuel efficiently. According to the oil price at present market, for example, thejetta car at the -20° c, only cost less than one yuan rmb one time.
Technical specifications
Technical specifications
Thermal power5000w
FuelGas diesel
Rated voltage (v)12v 24v
Fuel consumption (l/h)0.17-0.6
Rated power (w)15-90
Working temperature ( ° c)-40° c -~+20° c
Weight (kg)5.9
Dimensions l× w× h (mm)425× 148× 162.
Used Engines
HS Code 840820
PRICE = US$1,800/PIECE CIF
ORIGIN: THAILAND
PACKAGE: TONS
MIN ORDER:5 PIECES
DESCRIPTION
There are several types of engines used in automobiles. The car engine types are generally described based on two factors: the fuel type and engine layout/number of cylinders (cylinder configuration. One of the most common types of engines is petrol and diesel engines. But that's a generic way to describe a car engine.
SPECIFICATION
General Engine Specifications
Basic Engine Specifications
I-6, 4-Stroke-Cycle-Diesel
Displacement .......................................................................... 12.88 L (in3)
Rated engine speed .................................................................... 2300 rpm
High idle speed ........................................................................... 2530 rpm
Low idle speed (programmable) ................................................... 550 rpm
Peak torque ......................................................... 3,355 N m @ 1200 rpm
Bore ....................................................................................... 135 mm (in)
Stroke ...................................................................................... 150 mm (in)
Aspiration .................................. Supercharged-Turbocharged-Aftercooled
Governor ............................................................................................. ECU
Fuel system type .................................................................. Common Rail
Length ........................................................................... 1960 mm (77.1 in)
Length to flywheel housing ........................................... 1476 mm (58.1 in)
Width ............................................................................. 1195 mm (47.0 in)
Height ............................................................................ 1117 mm (43.9 in)
Weight, net dry (approx.) ................................................1672 kg (3686 lb)
Rotation (from flywheel end) .......................................... Counterclockwise
Flywheel housing/flywheel .................................................... SAE No. 01M
Flywheel teeth ....................................................................................... 155
Tolerances
Power ............................................................................................... +/- 3%
Exhaust Stack Temperature ............................................................ +/- 8%
Inlet Air Flow .................................................................................... +/- 5%
Intake Manifold Pressure ............................................................... +/- 10%
Exhaust Flow ................................................................................... +/- 6%
Specific Fuel Consumption .............................................................. +/- 3%
Heat Rejection ................................
