Features
Fiber core can be display clearly
Single x or y view and x & y view simultaneously
Auto check quality of , cleaved end face
Auto select best splicing program
9 seconds splice time and 30 seconds heat time
Small bulk and light weigh
5 inch color lcd monitor with clear digital image display
Simple operation menu
Specifications
ModelKl-280
Applicable fibersSm(itu-t g.652), mm(itu-t g.651), ds(itu-t g.653), nzds(itu-t g.655)
Fiber cleaved length8~16mm(coating diameter: 250µ,m)
16mm(coating diameter: 250 ~ 1000µ,m)
Fiber diameterCladding diameter: 80 ~150µ,m coating diameter: 100~ 1000¦ìm
Fiber countSingle
Fiber aligning method Core , aligning
Return loss>60db
Actual average splice loss0.02db(sm), 0.01db(mm), 0.04db(ds), 0.04db(nzds)
Splicing modeAuto
Splicing mode12(templet), 188(user)
Typical splicing timeTypical 9 sec, with standard sm fiber
Protection sleeve length60mm, 40mm and a series of micro sleeves
Storage of splice result5000 results, 3 parameter per result
Tension test2n
Fiber display and magnification400x(x or y view), 200x(x and y view)
Tube heating timeTypical 30 sec
Electrode life2500
No.Of splice/heating with batteryTypical 130 cycles (splice/tube heat) with inner li-battery
Display screen5 inch color lcd monitor
Image change overThe fiber image is turned upside down
TerminalsRs 232
Operating condition0 ~ 5000m above sea level, 0 ~ 95%rh and -10 50c, respectively, max. Wind velocity of 15m/s
Power supplyAc 100-240v with ac adapter,inner li-battery(6600mah)
Dimensions150mm(l) x150mm (w) x160mm (h)
Weight3.52 kg including battery.
Features
Core to core alignment by pas technology ( pas:profile alignment system)
Digital fusion splicer with automatic focus function
Fiber core can be display clearly
Single x or y view and x & y view simultaneously
Auto detect cleaved endface fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch tft color lcd monitor with clear digital image display
Usb & vga interface
Software upgrade via usb interface
Specifications
Model Kl-300t
Applicable fibersSm(itu-t g.652), mm(itu-t g.651), ds(itu-t g.653), nzds(itu-t g.655)
Fiber cleaved length8~16mm(coating diameter: 250µm)
16mm(coating diameter: 250 ~ 1000µm)
Fiber diameterCladding diameter:80 ~150µm coating diameter:100~ 1000¦ìm
Fiber countSingle
Fiber aligning methodCore or clad aligning
Image processing methodDigital
Actual average splice loss0.02db(sm), 0.01db(mm), 0.04db(ds), 0.04db(nzds)
Splicing timeTypical 9 sec, with standard sm fiber
Splicing mode53(templet), 40(user)
Splice loss estimateMore accurate
Return loss>60db
Storage of splice result4000 results, 20 parameter per result
Fiber display and magnification300x(x or y view), 150x(x and y view)
Tube heating timeTypical 30 sec
Tube heating mode9(templet), 24(user)
Tube heating temperatureCan be adjusted
Applicable protection sleeve length60mm, 40mm and a series of micro sleeves
Tension test2n
Electrode life2500
No.Of splice/heating with batteryTypical 150 cycles (splice/tube heat) with inner li-battery
Display screen5.6 tft inch color lcd monitor
Image change overThe fiber image is turned upside down
TerminalsUsb 1.1 and vga
Operating condition0 ~ 5000m above sea level, 0 ~ 95%rh and -10¡«50¡æ, respectively, max. Wind velocity of 15m/s
Power supplyAc 100-240v with ac adapter inner li-battery(6600mah)
Dimensions150mm(l) x150mm (w) x150mm (h)
Weight2.7 kg excluding battery, 3.2 kg including battery.
Features
Color LCD monitor & 256 magnification
Compact & light weight
Reversible monitor with control panel on each side
Max. Wind velocity of 15m/s.
8 sec. Splice time, 40 sec. Tube-heat time
Simultaneous x and y views
Large capacity internal battery
System test ensures the best working condition
User programmable
Auto check fiber end face
Auto calibrate parameters
Store 8000 groups of splice results
Multiple language options
Specifications
ModelDvp-730
Applicable fibersSm, mm, ds, nz-ds, edf
Cladding diameter100 to 150um
Coating diameter100 to 1000um
Fiber cleaved length8-22mm (standard)
Splicing modeAuto & manual
Average splice loss0.02db(sm), 0.01db(mm), 0.04db(ds), 0.04db(nzds)
Return loss 60db
Environment conditions-25-+50(operation temperature), 0-95%rh(humidity), 0-5000m (altitude)
Storage environment-40-+80(temperature), 0-95rh (humidity)
Protection sleeve length20mm, 40mm, 60mm
Tension test2.0n (standard)
LanguageEnglish, chinese, korea, russian, spanish etc.
InterfaceRs232 interface & video output
Power supplyAc adaptor: 85-260v input voltage
Internal battery: 12v voltage, 10ah, up to 200 times of continuous splices and heatsdc adaptor: 12v voltage, optional multipurpose external battery
Dimensions170(w)140(h)170(d)mm
Weight3.3kg.
Features
Rugged construction providing shock, dust and moisture resistance
Dual monitor position with automatic image orientation
Automatic arc calibration and iber identiication
User-selectable iber clamping method sheath clamp or fiber holders
Auto-start tube heater feature
Color LCD display with anti-relective coating for excellent visibility in bright sunlight
Simultaneous battery charge and splicer operation
Long life battery (up to 160 splice/heat cycles per charge)
Detachable work table incorporated into the transit case
Data and video download software and splicer upgrade software included; software upgrades through PC application via the internet
Green friendly RoHS & WEEE compliant
Specifications
Model FSM-60S
Applicable Fibers SM(G.652),MM(G.651), DS(G.653),NZ-DS(G.655)
Cladding Diameter 80 um to150 um
Coating Diameter 100 um to 1000 um
Fiber Cleave Length 8 to 16mm with 250um coating diameter, 16mm with 900um coating diameter
Typical Average Splice Loss 0.02dB with Sm, 0.01dB with mm, 0.04dB with DS, 0.04dB with NZDS
Splicing Time Typical 9 seconds with standard single-mode fiber
Arc Calibration method Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
Splicing modes 100 preset and user programmable modes
Splice Loss Estimate Based upon dual camera core alignment data
Storage of Splice Result Last 2000 results to be stored in the internal memory
Fiber Display X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification 300X for single X or Y view, or 187X for X and Y view
Viewing method Dual cameras with 4.1 inch TFT color LCD monitor
Operating Condition 0 to 5,000 m above sea level, 0 to 95 % RH and -10 to 50°C respectively
mechanical Proof Test 1.96 to 2.25N
Tube Heater Built-in tube heater with 30 heating modes; auto-start function
Tube Heating Time Typical 30 seconds with FP-03 sleeve, 35 seconds with FP3(40), 35-55 seconds with Fujikura micro sleeves
Protection Sleeve Length 60mm, 40mm, micro
Splice Cycles with Battery Typical 160 cycles with power save functions activated
Power Supply Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11, 13.2V DC with BTR-08 battery
Terminals USB 1.1 (USB-B type) for PC communication.
Mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater
Wind Protection Max. wind velocity of 15m/s. (34 mph)
Dimensions (W × D × H ) 136 × 161 × 143 mm; 5.3 × 6.3 × 5.6 inches
Weight 2.3 kg (5.1 lbs) with AC adapter; 2.7 kg (5.9 lbs) with BTR-08 battery.
Mfoc íªs sm and mm attenuators can be applied to adjust the power levels of signals in optical communications at the output of light sources, e/o converters and for testing the linearity or dynamic range of optical power meters.
Performance indexes :
Insertion loss0.1db
Return loss
Interchangeability
Repeatability0.1db
Plugging times
Operating wavelength
Operating temperature
Storage temperature
Features:
Standards of iec, bell core
Upc end-face finishing
High return loss and low insertion loss
High reliability and stability
Applications:
Fiber optic communication system
Fiber optic catv
Fiber optic test and measurement equipment
Fiber optic backbone
Description
1.Special two-layer tube technology for good flexibility and bend-resistant property.
2.Water-blocking compound filled up and all cross section double water-blocking.
3.Non-metal structure good electromegnectism resistant property, suitable for electric field and some areas where thunders usually happen.
4.Aramid yarn ensures the tensile strength performance.
5.Excellent water-proof layer, good moisture resistance.
Application
1, suitable for both indoor and outdoor
2, long distance communication system
3, local area network system
4, subsiber network system
