Software Specification
ADSL Features Full-rate ANSI T1.413 Issue 2
ITU-T G.992.1 (G.dmt)
ITU-T G.992.2 (G.lite)
ITU-T G.994.1 (G.hs)
ITU-T G.992.3 (G.dmt.bis)
ITU-T G.992.5
Max 6 kilometers
Data Rates Downstream: Up to 24Mbps
Upstream: Up to 3.5Mbps (With Annex M enabled)
ATM Features UNI 3.1ú¼ATM Adaptation Layer Type 5-AAL5
Multiprotocol encapsulation over ATM (RFC 1483)
UBR, CBR, VBR-rt, VBR-nrt
Supports 8PVCs
PPP Features PPP over ATM (RFC 2364)
PPP over Ethernet (RFC 2516)
Switching Features IGMP snooping
IGMP multicast
IEEE 802.1d transparent learning bridging
Routing Features Classical IP and ARP over ATM (RFC 1577/2225), MER, RIP V1/V2
Static routing, IP, TCP, UDP, ARP
NAT, NAPT, DNS, DDNS, DHCP Server
UPnP, Virtual Server, DMZ, Port Trigger
SIP, H323 ALG
Wireless Features Complies with IEEE 802.11g, IEEE802.11b
11g: Up to 54 Mbps(dynamic)
Provides WPA/WPA2 and WPA-PSK/WPA2-PSK authentication
Provides 64/128/152bit WEP encryption security and wireless LAN ACL (Access Control List)
Max wireless transmit power: 17dBm
Antenna Gain: 3dBi
Frequency Range:2.4-2.4835GHz
Security NAT
IP filterling
MAC filtering
Parental control
VPN Pass Through IPSec/PPTP/L2TP Pass-through
QoS IP Type of service(ToS)
802.1p
Device Management HTTP, Console
Administration and operation software (firmware) upgradable locally by web(HTTP), console(TFTP)
CWMP(TR-069).
CloudEngine S5731-H series switches are brand-new enhanced gigabit access switches that provide all-GE electrical downlink ports, fixed 10GE uplink ports, and one extended slot.
CloudEngine S5731-H delivers gigabit connectivity at the aggregation or access layer in large and midsize campuses, at the core layer in branches and small campuses, and at the access layer in data centers. Integrating native WLAN AC capabilities to support up to 1024 WLAN APs, CloudEngine S5731-H enables you to converge your wired and wireless networks for simplified operations. It also offers free mobility to deliver consistent user experience and VXLAN-based virtualization to create a multi-purpose network. With built-in security probes, CloudEngine S5731-H supports abnormal traffic detection, Encrypted Communications Analytics (ECA), and network-wide threat deception.
Pocket fob wireless kinetic switch application self-powered technology can control the lights, turn on the TV, manage temperature, close the blinds and gates and open the door.
Your valuable assistant
Wireless kinetic switch gives you smart control in the palm of your hand easy to set up, no wires, no batteries. Place it next to your couch or bed so you can control the light and mood without getting up.
No wires no batteries
Completely wireless. Powered by kinetic energy generated from simply pressing the switch.
Easy to carry
The Button is so tiny it can be put and carried around anywhere.
Easy to operate
Control any number of lights or devices as needed in four individually controllable channels, using the smart group function to control all connected lights devices simultaneously.
Pleasant press
Ensures you a press feeling always pleasant. A discree click allows you to have a good feedback.
add switches wherever you like
renovation for adding ambiance to your home
switch the lights off with one click
close the roller shutters from your bed
control a garage door or a gate
Make houses more affordable
You can save energy every with dimmer everytime you use your lights
Electrical energy savings
Turn a wall plug smart and connected
The minimalist solution for garden lighting
Fantastic evening on the terrace
Didiok-M1 is an intelligent wireless switch without using electricity and battery, which works with B20 wireless and intelligent control system technology to realize self-powered. It will generates electricity automatically when press the switch button , It is a real sense of green intelligent environmental intelligent swich.It helps to save labor cost and the cabling cost and makes life easier.
Didiok-M1 is an intelligent wireless switch without using electricity and battery, which works with B20 wireless and intelligent control system technology to realize self-powered. It will generates electricity automatically when press the switch button , It is a real sense of green intelligent environmental intelligent swich.It helps to save labor cost and the cabling cost and makes life easier.
86 type RF433mhz wireless receiver switch smart touch screen transmitter smart switch diy module, no need rewire
Feature:
new design touch panel remote control, it looks like a touch switch, in fact, it is RF433 remote control,you can use stickers, sticking anywhere to control the switch.There will be a faint light at night, Convenient to control the light.
Pls Noted: the customs don't allow to ship the battery, so the product not including any battery, pls purchase the battery at your local!
Receiver(wireless module)product parameters
Voltage: AC 90-250V
Current: 5A
power:500W
pairing with the remote control:
press the button of receiver for few seconds when rings one beep, and press the remote control for learning the signal,finished!
one beep for "turn on/off"
two beeps for "turn on"
three beeps for "turn off"
four beeps for "clear up the code"
Features ADSL Connection Speed up to 24Mbps Downstream
ADSL, DASL2/2+, RE-ADSL Support
Compatible with all major DSLAMs
Multiple PVC up to 8 support
USB Plug-and-Play installation
ADSL Features RADSL (ANSI T1.413 Issue 2)
G.dmt ADSL over POTS G.992.1 Annex A)
G.lite (G.992.2)
G.hs (G.994.1)
Auto-negotiating rate adaptation
ADSL2 G.dmt.bis (G.992.3)
ADSL2 G.lite.bis (G.992.4)
ADSL2+ (G.992.5)
Protocol Support ANSI T1.413 issue 2
ITU-T G.992.1, G992.2, G994.1
RFC 1483/2684 (Bridged/Routed Ethernet over ATM)
USB support PPP over ATM (RFC 2364)
USB support PPP over Ethernet (RFC 2516)
ITU-T 1.610 F4-F5 OAM Send and Receive/Loop back
Transparent Bridge Support
PAP/CHAP/MS-CHAP for password authentication support
DHCP Server/Relay/Client
DNS Relay Agent
DMZ Support
PPP Always on with configurable timeout
Connector One USB port with specification v1.1 compliant
One Ethernet 10/100Mbps Base-T
One RJ-11 port for ADSL connection
USB Cable
Power Jack
Compliance Certificates FCC Part 15, Part 68
CE Mark
Management Support Web-base Configuration GUI
Command-line interpreter (CLI)
Telnet Remote Management
FTP/TFTP firmware upgrade and configuration backup/restore
Syslog Support
Security NAT for Basic Firewall Support
Packet Filtering Firewall Support
Stateful Packet Inspection Support
Protection against Denial of Service attacks
Password Authentication to Modem
Environmental Operating Temperature: 0ípC ~ 50ípC
Humidity: 5% ~ 95% (non-condensing)
Storage Temperature: -40ípC ~ 70ípC
Software Specification
ADSL Features Full-rate ANSI T1.413 Issue 2
ITU-T G.992.1 (G.dmt)
ITU-T G.992.2 (G.lite)
ITU-T G.994.1 (G.hs)
ITU-T G.992.3 (G.dmt.bis)
ITU-T G.992.5
Max 6 kilometers
Data Rates Downstream: Up to 24Mbps
Upstream: Up to 3.5Mbps (With Annex M enabled)
ATM Features UNI 3.1ú¼ATM Adaptation Layer Type 5-AAL5
Multiprotocol encapsulation over ATM (RFC 1483)
UBR, CBR, VBR-rt, VBR-nrt
Supports 8PVCs
PPP Features PPP over ATM (RFC 2364)
PPP over Ethernet (RFC 2516)
Switching Features IEEE 802.1d transparent learning bridging
Routing Features Classical IP and ARP over ATM (RFC 1577/2225), MER
Static routing, IP, TCP, UDP, ARP
NAT, NAPT, DNS, DDNS, DHCP Server
UPnP, Virtual Server, DMZ, Port Trigger
Security NAT
IP filterling
MAC filtering
Parental control
VPN Pass Through IPSec/PPTP/L2TP Pass-through
QoS IP Type of service(ToS)
802.1p
Device Management HTTP, TELNET, Console
Administration and operation software (firmware) upgradable locally by web(HTTP), console(TFTP)
SNMP .
Hardware Specification
Ports 1 10/100M LAN Port(RJ45)
1 Line Port(RJ11)
1 USB 1.1 port
LED Indicators USB, LAN, ADSL, Alarm, ACT, Power
Dimensions (W*D*H) 6.5*4.3*1.1 in.(165*108*28 mm)
Environment Operating Temperature: 0íµ~40íµ (32¿H~104¿H)
Storage Temperature: -40íµ~70íµ (-40¿H~158¿H)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing.
