Supplier : Mono-crystalline and polycrystalline photovoltaic modules, solar systems for houses, solar water pumps, portable photovoltaic systems, photovoltaic (solar) carports systems, mobile isothermal bodies using electricity produced from PV modules, isothermal autonomous warehouse, solar advertising board
1. High calorific value;
2. Contains no sulphur or phosphorus, non-corrosive;
3. Green and Environmental Protection;
4. Compacted fuel, reduce transportation cost and save storage space.
5. Biofuels and made from natural, renewable energy sourcesâ??trees
Production process:crushing raw material=>material drying(rolling,air driving)=>high temperature,high pressure,shaping process=>sticks packed in kiln=>high temp carbonization(400-600degree,15days,or per customerâ??s requirement)=>taking out and packing charcoal.
Specifications
Cheap wood pellets
1.Favorable price
2.Smokeless, odorless and sparkless
3.Good raw materials of barbecue
Thank you for contacting us. We can offer best quality Alfalfa Pellets. Further, this is a 100% Natural Product grown and cultivated in Gujarat State of India, the nutritional specifications are subject to vary as no additions of foreign matters are made to increase/control the nutritional specification of the same.
Available In : 8 x 25 mm
We produce widest range of Alfalfa Pellets for Animal Feeding Objective. We produce 8� mm Alfalfa Pellet and 10� mm Alfalfa Pellet for Animal Feed Forage Industry
Alfalfa Pelleting Process
Generally its grown during the period of November to April Months of the year in India and the cutting process begins from the 45th� day of the plantation.
The field cut green alfalfa is spread on the agriculture land for sun drying process (which is generally called sun curing process). This is the most important phase of administration, wherein during the sun curing process the alfalfa leaves and stem has to be dried in such a manner that the leaves should not turn yellow or loose green pigments.
After 7 days of meticulous administration, the green alfalfa is converted in to hay.
The hay is loaded in trucks and transported to production side, where the first stage is to sieve (clean) the entire hay, so minor or major dust articles are removed from the same.
After cleaning process the hard stem particles are removed through a mechanical machining process and the available residue is absolutely clean and dehydrated soft leaves and soft steam.
The dehydrated alfalfa particles (leaves & steam) are grinded to a finer particles size. The overall texture of hay is now converted to Powder Form.
The powdered alfalfa is then passed through 100 degree Celsius stream for about 8 minutes, which detoxifies the alfalfa from any toxic elements and also gets cooked at a very digestible ratio.
The highly cooked alfalfa meal is then pelleted through feed extrusion methodology, during the process of pelleting again the cooked meal reaches to an extremely high temperature of 123 Degree Celsius, due mechanical thrust of the extruder in its 22 ft long barrel
The extremely hot pellets are then cooled down to a room temperature level, enabling the moisture level below 12%.
The above process produces the most advance format of Alfalfa Hay Pellet in 8 x 25 mm� and 6 x 25 mm size absolutely hygienic for Animal and Poultry feeding Purpose
Facts of Indian Alfalfa
The pricing of the alfalfa hay / pellet is totally dependent of the physical hay recovery after sun curing process, which varies 10% to 15%, which means when 100 Kgs of green alfalfa is sun dried, the hay recovery varies between 10Kgs to 15 Kgs.
The recoveries are totally dependent on the environmental factor and the water content within the stems of the alfalfa.
Countries like Canada, Northern US, New Zealand and Northern European Countries donâ??t get direct sun light (rather they get inclined sun lig
We are a leading design and manufacturing company of world-class solar products for commercial and residential use, including 3W to 295 W solar panels.
Our products and manufacturing processes are fully compliant with product safety and EMS requirements, including TUV/IEC61215 & 61730, CSA/UL1703,MCS ,CE and UKAS. Additionally, we have implemented best practices to protect the environment and conserve energy.
Mazut-100 is a fuel oil that is manufactured to GOST specifications, for example GOST 10585-75/99.
GOST is the Russian system of standards. Mazut is almost exclusively manufactured in the Russian Federation, This product is typically used for larger boilers in producing steam since the BTU content is high. The most important consideration when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock.
For shipment purposes, this product has a high viscosity which drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil, and is part of the products left over after gasoline and lighter components are evaporated from the crude oil.
The main difference between the different types of Mazut-100 is the content of sulphur. The grades are represented by these sulfuric levels:
- "Very Low Sulphur" is mazut with a sulphur content of 0.5%
- "Low Sulphur" is a mazut with a sulphur content of 0.5-1.0%
- "Normal Sulphur" is a mazut with a sulphur content of 1.0-2.0%
- "High Sulphur" is a mazut with a sulphur content of 2.0-3.5%
- Very Low Sulfur mazut is generally made from the lowest sulfur crude feedstocks.
Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature).
Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine.
The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades:
L - summer, used at ambient temperatures above 0 C;
3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation <-35 C and n <-25 C), or winter, used at temperatures up to -30 C, then the fuel must have a stasis <-45 C and n <-35 C);
- Arctic diesel fuel, the temperature of which is up to -50 C. The sulfur content in diesel fuel of grades L and Z does not exceed 0.2% for type I fuel and 0.5 for type II fuel, and grade A 0.4%
We offer a full wholesale and bulk supply to retailers, farm shops and eCommerce partners up and down the EU and Worldwide. We only supply quality, value for money products with a consistent supply that we have worked with for many years.
Our prices depends on the wood type, quantity and also depends on your location .
Our pellets are flammable, pure and compact. The pellets can be use for heating, cooking, and generating electricity, etc. The pellets are also granular, slick, well-stored, efficient as well as
environmentally friendly, and our prices are favorable.We are offering 6mm and 8mm Wood pellets DIN EN PLUS packed in 15kg plastic bags, big bags or bulk. Volume up to 3000t per month. We can offer the pellets delivered to your place or near port anywhere in
Europe or Middle East. Bases:Pine,Beech,Fir,Spruce Oak, Hard coniferous
Kiln Dried split firewood:
1. Descriptions: Kiln dried split firewood is a renewable resource, fuel that is already widely available in the world nowadays. The wood log is been split into smaller quantities. This is a hot process and the natural ligin in the wood shavings melts and binds the dust together, holding the wood in shape and giving it that characteristic seen on the outside.
2. Economic efficiency: Kiln dried split firewood are extremely dense and can be produced with a low moisture content (below 10%) that allows them to be burned with a very high combustion efficiency. Their high density also permits compact storage and rational transport over long distance. Electricity generated from kiln dried split firewood in converted coal plants is almost the same cost as electricity generated from natural gas, diesels.
3. Environmentally friendly: Kiln dried split firewood is a sustainable fuel that can deliver a significant reduction in net carbon emissions when compared with fossil fuels. Its production and use also brings additional environmental and social benefits.
4. Using scopes: Dried kiln split firewood replaces fossil fuels in power plants, stoves, boiler of textile, food, leather, animal feeding, dye industrials and animal bedding.
Hot Selling 100% Sawdust Biomass Wood Pellets Available for Export
Descriptions: Wood pellets are a renewable resource, the fuel that is already widely available in the world nowadays. The sawdust or wood shavings are compressed under great pressure and forced through holes. This is a hot process and the natural lignin in the sawdust/wood shavings melts and binds the dust together, holding the pellet in shape and giving it that characteristic sheen on the outside
Economic efficiency: Wood pellets are extremely dense and can be produced with a low moisture content (below 10%) that allows them to be burned with a very high combustion efficiency. Their high density also permits compact storage and rational transport over long distances. Electricity generated from pellets in converted coal plants is almost the same cost as electricity generated from natural gas, diesel.
Environmentally friendly: Wood pellets are a sustainable fuel that can deliver a significant reduction in net carbon emissions when compared with fossil fuels. Its production and use also bring additional environmental and social benefits.
Using scopes: Biomass fuels replace fossil fuels in power plants, stoves, the boiler of textile, food, leather, animal feeding, dye industrial, and animal bedding.
