Our product is a high quality product made from imported oils and additives of best quality. It has a very good life and will give the best performance under the most critical conditions. It is available in 210 ltrs. Hdpe drum/ 26 ltrs. And 50 ltrs.
Multi-brand Hydraulic Oils ISO VG 15, 32, 46, 68 and 100. Available in Drums, pails, IBCc, Bulk.
Our product is a high quality product made from imported oils and additives of best quality. It has a very good life and will give the best performance under the most critical conditions. It is available in 210 ltrs. Hdpe drum/ 26 ltrs. And 50 ltrs.
Multi-brand Hydraulic Oils ISO VG 15, 32, 46, 68 and 100. Available in Drums, pails, IBCc, Bulk.
Synthetic technology motor oil specially designed for modern high performance engine with gasoline direct injection (GDI and Turbo-GDI) systems. Developed by latest evolution technology platform EVOTEC fortified with SMART Molecules that improve engine cleanliness and prevent low-sped pre-ignition (LSPI). Outstanding low friction and heat resistance enhance acceleration response, wear prevention and maintaining engine power for better drivability in all situations.
APPLICATION
Designed for high performance gasoline engine both GDI and Turbo-GDI.
Recommended for passenger car, sport car and SUV equipped with start-stop system.
Suitable for all port fuel injection (PFI) gasoline engines running with unleaded gasoline (ULG) and ethanol blended gasoline (E10, E20 and E85).
KEY FEATURES
Enhance excellent engine cleanliness especially in piston and help reduce LSPI occurrence in Turbo-GDI engine by SMART Molecules.
Improve superb engine protection against wear and prevent timing chain elongation for maintaining maximum engine performance.
Outstanding low oil friction with high heat resistance by EVOTEC technology for superior acceleration responsiveness and reduced oil consumption.
Better oil degradation resistance and engine sludge prevention through oil drain intervals.
Product Properties for AdBlue as per the revised ISO22241 standard.
Urea 32,5 % (approximate) solution dissolved within deionised water. As required by SCR equipped vehicles under the provisions of Emissions standards Euro IV (Euro4), Euro V (Euro5) & Euro VI (Euro6).
Urea Content 31.8 33.2 % by weight
Density at 20C 1.0870 1.0930 g/cm
Refracting Index at 20C 1.3814 1.3843
Alkalinity as NH3 0.2 %
Biuret 0.3 %
Aldehyde 5 mg/kg
Insolubles 20 mg/kg
Phosphate (PO4) 0.5 mg/kg
Calcium 0.5 mg/kg
Iron 0.5 mg/kg
Copper 0.2 mg/kg
Zinc 0.2 mg/kg
Chromium 0.2 mg/kg
Nickel 0.2 mg/kg
Aluminium 0.5 mg/kg
Magnesium 0.5 mg/kg
Sodium 0.5 mg/kg
Potassium 0.5 mg/kg
Todays gear-driven apparatus is deliberate to accomplish in several applications, often having to survive harsh environments. Typically, gearboxes are becoming smaller and are being made from agiler and more refined resources, yet they must be more long-lasting than ever before. As a magnitude, more demands are being engaged upon the gear oil lubricant and bigger deliberation must be given to the use of high-performance base liquids and additives.
Advantages
Higher operative dependability through decreased wear
Improved lubricant service life
Extreme pressure safety
Enhanced performance at high or low temperatures
Brilliant micro-pitting performance
Less amount of noise generation
Biodegradability and renewability
Health and safety during the process
Subsidiary food contact approval HX-1 amended gearbox efficacy.
What You Require to Know When Picking Gear Oils
To select the best oil for a gear set, the subsequent principles must be addressed:
Viscosity Often stated as the utmost imperative possession of lubricating oil.
Additives The additive package used in the oil will define the lubricant's overall class and affects several main performance properties under operating circumstances.
Base Oil Type The kind of base oil used should be resolute by operative situations, gear type, and other issues
ntroduction:
Ethoxylated hydrogenated castor oil (PEG-40 hydrogenated castor oil) is a combination of synthetic polyethylene glycol (PEG) with natural castor oil. Ethoxylated hydrogenated castor oil can be used to emulsify and solubilize oil-in-water (o/w) emulsions.
Application:
Hydrogenated castor oil plays the role of thickening, hardening and sustained release in preparations, so it is used as a thickener, hardener and sustained release agent for the preparation of semi-solid preparations and solid preparations, such as ointments, suppositories, pills, tablets, etc. In ointments, creams and suppositories, it is mainly used as a hardener of the paste to adjust the consistency of the preparation; in oral preparations, it is mainly used to prepare sustained-release tablets and capsules, and can be used as a coating film or to form a solid skeleton to play a role in sustained or controlled release; it can also be used as a lubricant for tablets and capsules to improve the fluidity of particles.
ANTAR As a petroleum lubrication technology enterprise that rose in the East, since its establishment, it has been committed to the research and development of lubricant technology. Its products can be applied in fields such as lubrication, anti-wear and energy conservation, and heavy machinery friction,and it researches, develops, and sells various ultra-highperformance lubricating oils suitable for automobiles, ships, and industries.
With the vision of "Leading Lubrication Technology, Empowering Global Indus-try", ANTAR has rapidly developed into a global leader in the field of
lubrication solutions. With a modern production base covering an area of 40.000square meters, ANTAR not only plows deep into the Chinese market
but also expands its business territory to many countries and regions in Asia. Europe and North America, and establishes a sales and service network covering the whole world.
ANTAR has established long-term cooperative relationships with internationally renowned companies to jointly promote the innovation and application of lubrication technology and provide customers around the world with high-quality lubrication solutions without boundaries.
All ANTAR products fully meet the International Organization for Standardization (ISO), the American Petroleum Institute (API), the Society of Automotive
Engineers (SAE), the U.S. Environmental Protection Agency EPA, and other standardized production.
The products meet the certification standards of many international mainstream manufacturers such as CUMMINS, VOLVO, MAN, Mercedes-Benz, and Porsche.
BMW, Automobile Manufacturers Association of Europe (ACEA), European Union CE, etc., as well as the installations of Audi, Volkswagen, Porsche, MercedesBenz, Volvo, BMW, Mack, Mann, Renault, Cummins and other many engine manufacturers, After-sales service oil certification, and is widely accepted and used by motorsports organizations around the world.
We have passed IS09001:2015 quality management system certification, IS014001:2015 environmental management system certification, and OHSAS18001:2007 occupational health and safety management system certification to ensure that every step from raw material procurement to finished product shipment meets the latest international standards.
