Zhengzhou Dearye Heavy Machine Manufacturing Co., Ltd.

1. Dy1100 automatic multi-function hydraulic brick machine is our company introduction of absorption of USA and Germany technology research and development a high-tech patent product.
2. DY1100 adopts 3-beam 4-column prestress force tie bar sleeve structure and optimized finite element stress analysis, Enough to withstand two thousand tons of tension.
3. Adopting Germany Siemens PLC program control, human-machine interface and touch operation.
4. Oil cylinder seals all adopts Germany original parts, cylinder body is forged with double alloy, internal surface by grinding under heat treatment.
5. Adopting built-in displacement sensor in oil cylinder, which can control brick stuffing, high pass rate, low error (error is only ±1mm.
6. Hydraulic pressure station is the drive source of hydraulic press. Our company adopts original hydraulic pump and directional valve of Germany, making hydraulic brick machine can realize prepressing, die pressing and maintaining pressing.

Type : DY1100 block machine
Specification : 240*115*65mm(standard bricks)
240*115*90mm(perforated brick)
390*190*190mm(hollow bricks)
Colored pavement bricks with various specification
Quantity : 32 bricks/time (standard bricks)
Output: 5760-7200pcs/h (standard bricks)
Nominal pressure : 1100T
Pressure Head Course: 500mm
Drive power: 75kw(main motor)
Automatic full automatic cycle control on press unit
Operating convenient and rapid man machine interface through
10.4 inches colorful touch screen
Press mass 80t
External size 4785*4965*4690mm.

Applications:
Use to manufacture gypsum panel or building plasters
Use to make gypsum mold or statutes
As grout of marble, clay and ceiling tiles
As a color additive
Act as additive to other products

Types:
1. Super Micronized Gypsum Powder
2. Facade Rendering Gypsum

Packaging:
25 kg per bag
30 kg per bag
50 kg per bag
1 ton jumbo bag
1.5 tons jumbo bag
2 tons jumbo bag

Our company has rich experience and expertise in supplying a wide array of Lead Ore that are used in making electrical equipments, radiators among other industries. They are fabricated using premium-quality raw-materials in compliance with the prevailing industrial standards of quality.

They are offered to clients at affordable rates. The composition varies from client to client. We also export these quality-tested products to our esteemed overseas clients through reliable shipment modes.

Product Name

Cement Brick Making Machine
Color

As Picture
Application

Buliding Construction
Quality

High Quality

Applications:

In glass making

In ceramics production

About THE Product :
Blast furnace slag is used in the production of cement (iron Portland and blast furnace cement).
Air-cooled blast furnace slag is formed by allowing the molten slag to cool relatively slowly under ambient conditions; final cooling can be accelerated with a water spray. The cooled material is hard and dense, although it can have a vesicular texture with closed pores. After crushing and screening, air-cooled slag can be used in several applications.
Granulated slag is formed by quenching molten slag in water to form sand-sized particles of glass. The disordered structure of this glass gives the material moderate hydraulic cementitious properties when very finely ground into granulated blast furnace slag, but if it can access free lime, the granulated blast furnace slag develops strong hydraulic cementitious properties.
Pelletized or expanded slag is cooled through a water jet, which leads to rapid steam generation and the development of innumerable vesicles within the slag. The vesicular texture reduces the overall density of the slag and allows for good mechanical binding with hydraulic cement paste.
Blast Furance Slag is a nonmetallic co-product which is produced in the process of iron manufacturing, Granulated Blast Furnace Slag is a glassy granular material formed when molten blast furnace slag is rapidly cooled by direct water.
Rapid cooling prohibits the formation of crystals and forms glassy, non-metallic, silicates and alumino silicates of calcium.


GBFS : (Granulated Blast Furnace Slag)
Source : Granulated BF Slag From Gujarat State, India
Supply Quantity : 50,000 Metric Tons Per Month
Packing: Bulk

Parameters (% BY MASS)
CaO 30-38
Al2O3 15-20
SiO2 30-40
Glass Content 85-97
MgO 8-11
Fe2O3 0.5-1.5
Moisture 10 MAX
Size -5mm Min 95, +5 mm Max 5
Relative Gravity 2.9
Bulk Density(Bagged) 1200 KG/M3

Fly Ash:

Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries.

The Major Utilization Areas Of Fly Ash :
- Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC).
- Part replacement of OPC in cement concrete.
- High volume Fly Ash concrete.
- Roller Compacted Concrete used for dam & pavement construction.
- Manufacture of ash bricks and other building products.
- Construction of road embankments, structural fills, low lying area development.
- As a soil amender in agriculture and wasteland development.

Types of Fly Ash:
- According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties.

- Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product.

- Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash.

- Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics.

Minimum Order Quantity : 1 container

Calcined Bauxite:

Calcined Bauxite is obtained by calcining (heating) superior grade Bauxite at high temperature (from 850 oC to 1600 oC). This removes moisture thereby increasing the alumina content. Compared to an alumina content of about 57 % to 58 % in raw Bauxite, Calcined Bauxite has an alumina content of 82 % to 86 %. The heating is carried out in rotary kilns. Calcination is done at different temperatures ranging from 850 oC to 1600 oC depending upon the customer’s application.

We export Calcined Bauxite for various applications such as refractory bricks, abrasives, steel polishing, etc. We provide consistency in quality and availability of Calcined Bauxite at extremely competitive prices.

Applications of Calcined Bauxite:

Refractory Grade Calcined Bauxite (CB - I and CB - II Grade) : To make refractory grade, Bauxite is thermally treated at 1600 oC to produce Calcined Bauxite where the Alumina content is mostly above 82%.

Brown Fused Alumina, Proppants and Road Surfacing : To make the above grades, Bauxite is thermally treated at 1000 oC - 1200 oC to produce Calcined Bauxite where the Alumina content is anywhere between 80-88% depending on the requirement.

Minimum Order Quantity : 1 Containers