Supplier : Lead cutting machines, lead forming machines, pcb preparation machines, through hole equipment, turnkey solution, metal machining, PCB lead cutter, PCB depenaling machine
Established: 1983
Standards: ISO 9001, ISO 9002
Verification Status
Contact Details:
No.17, Lane 139, Minan E. Rd., Xinzhuan
New Taipei
24266
Taiwan
Best Selection for medium of high volume production. This model is designed to trim the extra long leads automatically and efficiently on the PCB that components inserted and soldered.
A pair of conveyor chain is equipped in the model in which clamp and deliver the PCB to the blade turning in high speed for trimming. Warp prevention device is equipped to ensure no damage on boards.
Expandable in function and working independently- The model can be optional connecting in line with wave soldering machine by Connection Bridge and operates automatically.
The Tungsten Carbide Blade is excluded in the machine.
SPECIFICATIONS
Dimension:900(L) x 670(W) x 800(H) m/m
Power:220V 50/60HZ,Net Weight:115Kgs
Feeding Speed:0 - 3 m (Adjustable)
RPM of Spindle:4500
HP:3/4 HP
Min. Lead Height:1.0mm Min
MAX.PCB Working Size:500mm(L) x 280mm(W)
NTG350
Pre-scored PCB Depaneling machine, PCB Separator: Pneumatic Type
FEATURES
The machine was designed to depanel pre-scored panelboards carefully, without bending or tension stress.
Even sensitive SMD-Components like ceramic capacitors, will not be damaged by the depaneling process, or thin board even to 0.3mm cab be worked safely.
Due to the special design of the knives also boards with high components placed close to the edges can be depaneled safely.Based on a proven method of depaneling, wedge-shaped knives are used to cut the panels within the groove.
This enables the boards less than 1mm thickness to be separated safely and without creating stress. This machine is pneumatically driven using standard parts. It is noiseless operation with none of usual compressed air noises. Rigid design without vibration in operation
The PCB with sensitive SMD capacitor or thin board even to 0.3mm can be worked safely.Gap for insertion of the board can easily be adjusted by means of the adjusting knob in front of the machine.Gap for insertion of the board can easily be adjusted by means of the adjusting knob in front of the machine.Gap for insertion of the board can easily be adjusted by means of the adjusting knob in front of the machine.
Depaneling process without vibrations
Pneumatic control placed in a separate unit for easier maintenance.
SPECIFICATIONS
â?¢Easy maintenance and operation.
Air source¡GCompressed air 5kg/cm2
Dimension¡G(L) 720 x (W) 500 x (H) 1070 mm
Weight¡G190Kgs
Knife length¡G350mm
PCB thickness range¡G0.3mm ~ 3.0mm
NTG-520N
Pre-scored PCB Depaneling machine/ de-panelizer. Separate PCB along with V grooves.
[Feature]
1. Separating the V-cut panel boards in the principle of non-bending stress.
2. The knives are adjustable both in axial and radial directions.
3. The round knives separate the board within the V-groove. Slightly adjust according to PCB thickness.
4. The depaneling maximum of PCB width is 160mm, the PCB length is unlimited.
[ Specification ]
Powerï¼?110V/220V, 50/60HZ
Dimensionï¼?(L)430 x (W)430 x (H)520
Weightï¼?36 kgs
PCB thickness rangeï¼?0.8-2.0mm
Counting in both directions (Left or right).
Divider from 1 to 10 (up to 19upon request).
Totalize mode counting.
Pre-set mode counting (with an audible signal when the desired components number is reached).
Calibration test and self diagnostic procedure.
Lest counting value and condition memory.
External detector input
SPECIFICATIONS
Output for external motor control.
Accumulator model disposable.
Min. lead diameter: £p0.35mm
Dimension: 350 x 300 x 280mm
Weight: 6Kgs
Power: 110V / 220V AC
1. Suitable for power transistors or similar components in stick or tube.
2. Tooling set is changeable for various kinds of forming.
3. Easy maintenance and simple die change. A set of die is equipped upon your spec.
4. Forming speed adjustable continuously.
5. Vibrant Bowl Feeder is extendable optionally for loose package.
Packaging: Carton Case
Dimension: 460mm(L), 360mm(W), 340mm(L)
Weight: 29Kgs
Performance: Max 6000 comp./hr.
Hand-crank Taped Axial Lead Former (S Type --- Slim, narrow shoulder and small pitch) > > Product No. : RT-80S
RT-80S
FEATURES
RT-80S, Lead Former targets for smaller pitch component.
Changeovers and setups are simple and fast. Thank to no tooling required pitch and lead length adjustment.
Never damage components leads or body.
Lead-supporter device ( Pressure relief) : When bending the components leads, the supporters hold the lead to prevent from damage.
Independent rotary disc cutters for longer cutting life.
Smaller components: like 1/2W, 1/4W resistor are suitable for it.
SPECIFICATIONS
Dimension: 380(L) x180(W) x 210 (H) mm
Weight: 8kgs (N.W.); 9 kgs (G.W.)
Simple operation- Rotate hand crank. Production rates: Taped 60,000 pcs/hr ( Depends on operator)
RT-80S, RT-82S, RT-86S, RT-90S slim lead (S type)
CF-360, Loose radial lead cutter economizes PCB assembly and simplifies component insertion tasks by eliminating costly and tedious manual trimming.
Special cutting designed to ensure easy adjustment and long life of cutting tools.
Linear feeder accommodates all size of parts.
Easy adjusts for lead length.
Process up to 9,000 pieces per hour.
Easy maintenance and simple operation.
Jumper Wire Forming Machine/No Waste, One Lead Length Adjustable
No Waste, One Lead Length Adjustable
Speed : 7500/H
Power : A110V/220V AC. 60HZ/50HZ
Dimension: L800 x W400 x H600m/m
Weight: 44 Kgs
No waste material.
Emergency stop device is installed. h Lead Length 0 - 12 m/m
H Lead Length 3ï¼?5ï¼?8 m/m
L Lead Width 5 - 30 m/m
W Wire 0.6 - 0.7 m/m
LED Display for Counting.
With Quantity pre-set device.
SMT Semi-automatic Pick and Place Machine with dispenser.
Bench-top and compact size is great for R&D and studio.
FEATURES
SMT-402 has the function to suck SMT component taping and spot glue on the PC board.
Operation with step pad switch to Spot glue SMT component rapidly.
The operation function could be separated or combined Sliding axial X and Y.
Suitable for sucking and taping small size SMT component Feeder frame could turn around 360 degree,
90 kinds of components could be operated. 16 sets SMT tape reel material could be loaded.
uitable for any reel size. Available for sample design, especially for changeable small quantity multi style production.
SPECIFICATIONS
Power: AC 220 V 50 / 60HZ
Dimension: 800 x 720 x 300mm
Weight: 22 KGS
Air Source: 4 ~ 5 Kg / square cm
Feeder: 16 Sets
Material Box: 90 pieces
MAX. PCB Working Size: 250 x 300mm
www.renthang.com
renthang@renthang.com
+886-2-82011187
