The metal oxide arrester tester is used for the measurement and analysis of metal oxide arrester MOA leakage. It is mainly used for measuring the resistive current to analyze the degree of zinc oxide aging and damp. The field charged test shall conform to Electric Power Industry Standard of the People's DL474.5-92 Guide for Insulation Test on Site - Lightning Arrester Tests. The metal oxide arrester tester can be also used for factory and acceptance tests.
Zinc oxide arrester tester Technical Indexes
Range of reference voltage input peak 10V-200V
Measurement range of full leakage current peak 100uA 10mA
Measurement range of resistive current peak 100uA 10mA
Measurement range of capacitive current peak 100uA 10mA
Measurement range of angle 0-90
Power consumption 4W
System measurement accuracy reading 5 5 words not more than 2m for harmonic current
AC power supply AC 220V 10 50Hz 1
Precautions
When measure the reference voltage from PT or the measuring end of the testing transformer, carefully check wiring to avoid the PT secondary or test voltage short circuit.
Be careful not to wrongly connect the current and voltage sampling lines in the connecting process.
In the laboratory experiment, the high voltage power supply cannot use the series excitation testing transformer.
Summary
The Arrester is suitable for testing the internal defects of 10KV and below 10KV MOA (metal Oxide Arrester).Before the annual season of thunderstormsit 's necessary to test metal Oxide using 1mA DC voltage and 0.75U1mA leakage current at Power plants/substations.The equipment was developped according to the requirement of site it 's integrated with DC HV supplymeasurement and control system. it has the characters of small size and light weight.
Feature
1.Supply power: AC220V or Charging battery.
2.LCD display test datas.
3.Convenient to carry.
TKBLQ-I zinc oxide arrester tester is a special instrument used to test the electrical performance of arresters. The instrument is suitable for live or power failure detection of arresters of various voltage levels, so as to timely detect the internal insulation damp and valve aging and other dangerous defects.
TKBLQ-I zinc oxide arrester test instrument is easy to operate and easy to use. The whole measuring process is controlled by microcomputer. It can measure the total current, resistive current and its harmonics, power frequency reference voltage and its harmonics, active power and phase difference. The real waveform of voltage and current can be displayed on the large screen.
Features:
1. 5.7 "320 Ã?? 240 LCD, high-speed thermal printer; graphic display, intuitive interface, easy to operate and use.
2. It is applicable to live arrester, power failure or laboratory.
3. The current and voltage sensors are completely isolated, safe and reliable. A, B, C three-phase arrester can be stored as a group of test data.
4. The instrument can test continuously, display voltage current curve, and print data and curve quickly.
5. The internal configuration memory can store 200 groups of test data when power down.
6. With RS232 communication interface, the test data can be exported through the upper computer.
7. High speed sampling frequency, advanced digital signal processing technology, strong anti-interference performance, high accuracy of measurement results.
8. It adopts dustproof, waterproof and anticorrosive engineering plastic sealing box, which is small in volume, light in weight and easy to carry.
TKBLQ-II zinc oxide arrester tester is a special instrument used to test the electrical performance of zinc oxide arrester. The instrument is suitable for live or power failure detection of zinc oxide arrester of various voltage levels so as to timely detect the internal insulation damp and valve aging and other dangerous defects.
TKBLQ-II zinc oxide arrester tester is easy to operate and easy to use. The whole measuring process is controlled by single chip microcomputer. It can measure the total current resistive current and its harmonics power frequency reference voltage and its harmonics active power and phase difference. The instrument uses digital waveform analysis technology harmonic analysis and digital filtering software anti-interference methods to make the measurement results accurate and stable.
1. This machine adopts large screen LCD display all English menu operation easy to use.
2. High precision sampling and processing circuit and advanced Fourier harmonic analysis technology ensure more reliable data.
3. The instrument adopts high-speed magnetic isolation digital sensor to directly collect the input voltage and current signals which ensures the reliability and safety of the data.
4. Support wireless synchronous voltage sampling mode (type II).
5. The instrument can use electric field induction instead of PT secondary wiring (type I).
6. It has the functions of resistive current fundamental peak output and side phase correction.
7. The instrument is equipped with rechargeable battery calendar clock and micro printer which can store 120 sets of measurement data.
This Tester is used to verify the electrical performance of Zinc Oxide Arrester. The instrument is suitable for various kinds of voltage levels zinc oxide arrester de-energized testing or energized testing thus define the risk and inner insulation moisture and valve aging defects.
1. 800 Ã?? 480 color LCD touch screen and high speed thermal printer.
2. Long distance wireless transmission. PT signal wireless transmission distance more than 400 m up to 2000 m;
3. Applicable for arrester de-energized test energized test and lab room test.
4. Three-phase current and three-phase voltage test simultaneously current and voltage sensor is isolated safe and reliable.
5. Two signal sampling methods support no voltage mode software calculation to get voltage reference
6. Built in high energy lithium battery And only weak current inside the instrument voltage is less than 12 volts.
7. Equipped with industrial grade operating system support direct shun-down mode
8. With 4G SD card can store massive testing data
9. With USB interface
10. Advanced data processing system support historical data management data analysis report automatic generation&printing
11. High sampling rate advanced digital signal processing technology high anti-interference performance and high precision.
12. With dust-proof waterproof anti-corrosion engineering seal box package small volume light weight and portable.
37712 Zinc Oxide Arrester Tester Suppliers
Short on time? Let Zinc Oxide Arrester Tester sellers contact you.
TKBLQ-II zinc oxide arrester tester is a special instrument used to test the electrical performance of zinc oxide arrester. The instrument is suitable for live or power failure detection of zinc oxide arrester of various voltage levels so as to timely detect the internal insulation damp and valve aging and other dangerous defects.
TKBLQ-II zinc oxide arrester tester is easy to operate and easy to use. The whole measuring process is controlled by single chip microcomputer. It can measure the total current resistive current and its harmonics power frequency reference voltage and its harmonics active power and phase difference. The instrument uses digital waveform analysis technology harmonic analysis and digital filtering software anti-interference methods to make the measurement results accurate and stable.
1. This machine adopts large screen LCD display all English menu operation easy to use.
2. High precision sampling and processing circuit and advanced Fourier harmonic analysis technology ensure more reliable data.
3. The instrument adopts high-speed magnetic isolation digital sensor to directly collect the input voltage and current signals which ensures the reliability and safety of the data.
4. Support wireless synchronous voltage sampling mode (type II).
5. The instrument can use electric field induction instead of PT secondary wiring (type I).
6. It has the functions of resistive current fundamental peak output and side phase correction.
7. The instrument is equipped with rechargeable battery calendar clock and micro printer which can store 120 sets of measurement data.
TKBLQ-I zinc oxide arrester tester is a special instrument used to test the electrical performance of arresters. The instrument is suitable for live or power failure detection of arresters of various voltage levels, so as to timely detect the internal insulation damp and valve aging and other dangerous defects.
TKBLQ-I zinc oxide arrester test instrument is easy to operate and easy to use. The whole measuring process is controlled by microcomputer. It can measure the total current, resistive current and its harmonics, power frequency reference voltage and its harmonics, active power and phase difference. The real waveform of voltage and current can be displayed on the large screen.
Features:
1. 5.7 "320 Ã?? 240 LCD, high-speed thermal printer; graphic display, intuitive interface, easy to operate and use.
2. It is applicable to live arrester, power failure or laboratory.
3. The current and voltage sensors are completely isolated, safe and reliable. A, B, C three-phase arrester can be stored as a group of test data.
4. The instrument can test continuously, display voltage current curve, and print data and curve quickly.
5. The internal configuration memory can store 200 groups of test data when power down.
6. With RS232 communication interface, the test data can be exported through the upper computer.
7. High speed sampling frequency, advanced digital signal processing technology, strong anti-interference performance, high accuracy of measurement results.
8. It adopts dustproof, waterproof and anticorrosive engineering plastic sealing box, which is small in volume, light in weight and easy to carry.
TKBLQ-I zinc oxide arrester tester is a special instrument used to test the electrical performance of arresters. The instrument is suitable for live or power failure detection of arresters of various voltage levels, so as to timely detect the internal insulation damp and valve aging and other dangerous defects.
TKBLQ-I zinc oxide arrester test instrument is easy to operate and easy to use. The whole measuring process is controlled by microcomputer. It can measure the total current, resistive current and its harmonics, power frequency reference voltage and its harmonics, active power and phase difference. The real waveform of voltage and current can be displayed on the large screen.
Features:
1. 5.7 "320 Ã?? 240 LCD, high-speed thermal printer; graphic display, intuitive interface, easy to operate and use.
2. It is applicable to live arrester, power failure or laboratory.
3. The current and voltage sensors are completely isolated, safe and reliable. A, B, C three-phase arrester can be stored as a group of test data.
4. The instrument can test continuously, display voltage current curve, and print data and curve quickly.
5. The internal configuration memory can store 200 groups of test data when power down.
6. With RS232 communication interface, the test data can be exported through the upper computer.
7. High speed sampling frequency, advanced digital signal processing technology, strong anti-interference performance, high accuracy of measurement results.
8. It adopts dustproof, waterproof and anticorrosive engineering plastic sealing box, which is small in volume, light in weight and easy to carry.
TKBLQ-II zinc oxide arrester tester is a special instrument used to test the electrical performance of zinc oxide arrester. The instrument is suitable for live or power failure detection of zinc oxide arrester of various voltage levels so as to timely detect the internal insulation damp and valve aging and other dangerous defects.
TKBLQ-II zinc oxide arrester tester is easy to operate and easy to use. The whole measuring process is controlled by single chip microcomputer. It can measure the total current resistive current and its harmonics power frequency reference voltage and its harmonics active power and phase difference. The instrument uses digital waveform analysis technology harmonic analysis and digital filtering software anti-interference methods to make the measurement results accurate and stable.
1. This machine adopts large screen LCD display all English menu operation easy to use.
2. High precision sampling and processing circuit and advanced Fourier harmonic analysis technology ensure more reliable data.
3. The instrument adopts high-speed magnetic isolation digital sensor to directly collect the input voltage and current signals which ensures the reliability and safety of the data.
4. Support wireless synchronous voltage sampling mode (type II).
5. The instrument can use electric field induction instead of PT secondary wiring (type I).
6. It has the functions of resistive current fundamental peak output and side phase correction.
7. The instrument is equipped with rechargeable battery calendar clock and micro printer which can store 120 sets of measurement data.
The metal oxide arrester tester is used for the measurement and analysis of metal oxide arrester [MOA] leakage. It is mainly used for measuring the resistive current to analyze the degree of zinc oxide aging and damp. The field charged test shall conform to Electric Power Industry Standard of the People's Republic of China DL474.5-92 Guide for Insulation Test on Site - Lightning Arrester Tests. The metal oxide arrester tester can be also used for factory and acceptance tests.
Zinc oxide arrester tester Technical Indexes:
Range of reference voltage input (peak): 10V-200V
Measurement range of full leakage current (peak): 100uA-10mA
Measurement range of resistive current (peak): 100uA-10mA
Measurement range of capacitive current (peak): 100uA-10mA
Measurement range of angle: 0·-90
Power consumption: 4W
System measurement accuracy: ± (reading 5% + 5 words) (not more than 2mA for harmonic current)
Summary
The Arrester is suitable for testing the internal defects of 10KV and below 10KV MOA (metal Oxide Arrester).Before the annual season of thunderstormsit 's necessary to test metal Oxide using 1mA DC voltage and 0.75U1mA leakage current at Power plants/substations.The equipment was developped according to the requirement of site it 's integrated with DC HV supplymeasurement and control system. it has the characters of small size and light weight.
Feature
1.Supply power: AC220V or Charging battery.
2.LCD display test datas.
3.Convenient to carry.
Zinc oxide is a versatile inorganic compound widely recognized for its numerous industrial and consumer applications. It is primarily known for its use as a white pigment in paints, sunscreens, and cosmetics, owing to its excellent UV-blocking properties and opacity. In addition to its role in pigmentation and sun protection, zinc oxide is utilized in the rubber and ceramics industries as a reinforcing agent and in the manufacturing of various chemical products, including zinc-based chemicals and pharmaceuticals. Its versatility, non-toxic nature, and ability to offer both aesthetic and functional benefits make zinc oxide a valuable and widely used compound in diverse fields.
Zinc oxide is white powder, with good hiding power and tinting power, widely used in printing & dyeing, rubber, coating, ceramics, feeds, cosmetics, pharmacy,ink, cable, electronics, phosphor, catalysts.
1. The product has small particle size, large specific surface area, strong adhesion and hiding power, which can greatly improve the efficacy of the coating.
2. The product has a small proportion and is not easy to form precipitation in the use or final product.
3. The product also has the function of shielding ultraviolet rays, and can play an anti-aging role in the coating.
Zinc oxide is white powder, with good hiding power and tinting power, widely used in printing & dyeing, rubber, coating, ceramics, feeds, cosmetics, pharmacy,ink, cable, electronics, phosphor, catalysts.
1. The product has small particle size, large specific surface area, strong adhesion and hiding power, which can greatly improve the efficacy of the coating.
2. The product has a small proportion and is not easy to form precipitation in the use or final product.
3. The product also has the function of shielding ultraviolet rays, and can play an anti-aging role in the coating.
We are a direct supplier of Zinc Oxide min 50% original of Vietnam, C/O is provided.Quantity available: 3,000 Ton/ Month, Payment: T/T or L/C, Looking for a serious buyer from worldwide
zinc oxide arrester tester is a special instrument used to test the electrical performance of zinc oxide arrester. The instrument is suitable for live or power failure detection of zinc oxide arrester of various voltage levels so as to timely detect the internal insulation damp and valve aging and other dangerous defects.
zinc oxide arrester tester is easy to operate and easy to use. The whole measuring process is controlled by single chip microcomputer. It can measure the total current resistive current and its harmonics power frequency reference voltage and its harmonics active power and phase difference. The instrument uses digital waveform analysis technology harmonic analysis and digital filtering software anti-interference methods to make the measurement results accurate and stable.
Parameter:
1. Full current measurement range: 0-10mA effective value 50Hz/60Hz accuracy: (reading 5% + 5a)
2. Measurement accuracy of resistive current fundamental wave (secondary method without Interphase Interference): (reading 5% + 5a)
3. Current harmonic accuracy: (reading 10% + 10a)
4. Reference voltage input range: 25V-250V RMS total harmonic content 30% 50Hz/60Hz
5. Reference voltage measurement accuracy: (reading 5% + 0.5V)
6. Voltage harmonic measurement accuracy: (reading 10%)
7. Angle between fundamental current and fundamental voltage: 0-360
8. Working time of battery: 6 hours of main engine charging power supply: 220 V 10% 50Hz/60Hz charging time: 5 hours
Common dosage and maximum dosage according to the American IIG: rectal, suppository, 375mg respiratory, solution, injection, 3.11% subcutaneous, injection, 2.0e-03% subcutaneous, injection, 0.01% subcutaneous, suspension, 2.5e-03% [2] Pharmaceutical Additives Dictionary: subcutaneous injection 0.192mg, general topical preparation 0.432g/g, other topical preparation 250mg/g, insecticide. [3] [1] American IIG [2] Inactive Ingredient Search for Approved Drug Products. [3] Japan Pharmaceutical Additives Association. Japanese Pharmaceutical Additives Dictionary. 2007 Edition [S]. Japanese Chemical Book: Yakuji Daily, 2007. Stability and Storage Conditions This product is placed in a sealed container. Store in a cool and dry place. .Function In addition to being used as an astringent and protective agent in clinical practice, this product is used as a filler and diluent in pharmaceutical manufacturing, and is used in plasters, poultices, and dental preparations. This product is also used in the manufacture of cosmetics such as powders and lipsticks. The United States Pharmacopoeia also includes neutral zinc oxide used in sunscreens. Safety This product is non-toxic, non-irritating to the skin and mucous membranes, and is generally considered safe
Zinc oxide is white powder, with good hiding power and tinting power, widely used in printing & dyeing, rubber, coating, ceramics, feeds, cosmetics, pharmacy,ink, cable, electronics, phosphor, catalysts.
1. The product has small particle size, large specific surface area, strong adhesion and hiding power, which can greatly improve the efficacy of the coating.
2. The product has a small proportion and is not easy to form precipitation in the use or final product.
3. The product also has the function of shielding ultraviolet rays, and can play an anti-aging role in the coating.
37712 Zinc Oxide Arrester Tester Suppliers
Short on time? Let Zinc Oxide Arrester Tester sellers contact you.
