Find Verified Yag Laser Marking Machine Suppliers, Manufacturers and Wholesalers

Technical parameters
(the working area and laser power can be customized according to requirement)
Model of machine HLM-SD-50
Laser tubeSemi-conductor mould
Cutting area110mm 110mm /300mm 300mm(optional)
Laser power 50w
Marking speed0-7000mm/s
Operating voltage Ac220 10%, 50hz
Location precision 0.003mm
Working environmentTemperature: 0-40 centidegree, humidity: 45%-85%
Marking depth 0-0.3mm
Min. Line width 0.02mm
Min. Character 0.2mm

Graphic format supported BMP, HPGL(PLT), JPEG, GIF, TIFF, PCX, TAG, CDR, DWG, DXF, compatible hpg order, support DXF, PLT, BMP and dxt(tiandao embroider software), etc.
Working tableLift platform up to 1, 000mm from the bottom to the top
Auxiliary deviceExhaust fan and cooling system
Laser wavelength1064nm.


Wood case

1.Introduction
The new generation of laser marking machine YMM-50 is applicable to almost any material surface. It offers various advantages with comparison to the traditional marking methods, such as noise-free, stress-free, ink-free, hazard-free (Printing marking uses hazardous solvent handling and disposal), tools-free and wearing-free(Tools wear in stamping systems). Laser marking technique offers a quiet, clean, low maintenance and easily configured system for permanent marking of almost any material surface.

2. Features
Friendly and ergonomical man-machine interface
Stable, precise and high-speed system
File format to support any CorelDraw format, e.g., PLT, BMP, DST, etc.; Embedded test and graphic design tools offer various editing features
Auto-numbering Barcode marking including Code 39, 93, 128, EAN-8, EAN-13, VIN, etc. and serial numbers
Auto cooling
Flexible text / graphics marking; Line or arc scribing to enable flexible profile scribing (Complicated profile scribing is optional)
3. Technical Parameters
Wavelength 1064 nm
Pump source Kr lamp
Laser cavity Ceramic
Laser output stability í_ í+ 3%
Beam expanded angle í_ 8 mrad
Aiming laser Red
Linear speed Adjustable, max 5000 mm/ s
Line width Min 0.1mm
Letter size Min 0.5mm
Marking area F=160 mm 70 mm í- 70 mm
F=220 mm 100 mm í- 100 mm
F=250 mm 150 mm í-150 mm
Power supply Single-phase AC 220 V í+ 10%, 50 Hz /60 Hz,PE,(A voltage stabilizer might be required to avoid irregular cutting quality caused by severe voltage fluctuation)
Input power Max 7kW
Dimension 1500 mm x 500 mm x 1200 mm
Net weight ~180 kg
Cooling Mode Water cooling

4.Standard Configuration
Laser machine í- 1 set
PC í- 1 set
Marking software (In English) í- 1 set
Operation manual (In English) í- 1

Wooden Case

Performance Features
1)Taking YAG lamp-pumped solid laser device as the light source,2D fast-speed scanning lences is swing as the scheduled angles under the controling of the computer . The laser focus on the surface of the work piece by F-úclences to form images and realise marking and graph processing.
2)It has the longest application time and the most extensive usage areas and is the most mature technology at present.
3)By using fast-speed scan lens, it can scan the graph in shortest time & finish fine marking process.
4)It can configure auto clamp and baiting production line as Usersª requirements .
5)User can mark data, series number & bar code automatically.
6)User can share & communicate the data with other equipments online.

Application scope and material
Automobile parts : pistons, piston rings, gears, shafts, bearings, clutch, lights
electronic components :
resistance, capacitance, chips, printed circuit boards, such as the keyboard.
Mechanical parts : bearings, gears, standard parts, such as motors.
Instrument : panel signs, precision equipment.
Hardware tools : knives, tools, measuring tool, the cutting tool, etc.,
Daily necessities : handicrafts, zipper, key holder, such as sanitary ware

Technical Data
Laser output power:50W
Standard marking scrope:110 mm110mm
Selective Marking scope: 70mm70mm/175 mm175mm
Marking depth:
0.01~0.3m (can be adjusted according to material)
Marking speed: 7000mm/s
Repeated accuracy: 0.01mm
Laser wavelength: 1064gm
Minimum line width: 0.015mm
Electric power requirement:380V/50HZ
Machine power: 5 KW

Dimensions
ItemDimension (cm)
(LWH)Packing Size (cm)
(LWH)Net WeightGross Weight
Laser Optical System:2412812036113129440 Kgs450 Kgs
Controlling Cabinet:5956806088117
Water-cooling Machine:5470906565147
Total:1.72 M2

Mechanical characteristics :
Applied the krypton lamp to the laser source, adopt imported with original packaging key accessories such as ceramic cavity(English), Q-switch (English),Laser source, laser power (Singapore) and so on ,which ensure the high marking precision and speed. Having stable and the long-term work performance that belongs to the general model.
Applicable materials and field:
1. Can be carved on the metal and many kinds of nonmetal materials.
2. Widely applied in electronic components, integrated circuit, electrical appliances, mobile communications, hardware products, tools accessories, precision instruments, glasses watches, jewelry ornaments, auto parts, plastic buttons, building materials, PVC pipes medical devices, etc.


Wooden box and 250kg

Maximum laser power: 50w
Laser wavelength: 1064nm
Beam quality m2: <10
Laser repetition frequency: 50khz
Standard engraving range: 110mm 110mm
Optional engraving range: 50mm 50mm / 150mm 150mm / 300mm 300mm
Engraving depth: 0.3mm
Engraving line speed: 7000mm / s
Minimum line width: 0.02mm
Minimum characters: 0.3mm
Repeatability: 0.003mm
Total power: 5kw
The demand for electricity: 380v / three phase / 50hz/19a or 220v / single phase / 50hz/33a.

Technical specifications:.
Model HL-YLC500-2010
Cutting zone2000*1000mm
Cutting thickness0.2-6mm
Laser routeFixed laser route, work piece moving by cross slide working table
Transmission methodServo ballscrew
Cutting positioningRed light pointer
Operating systemWindows 2000/xp
Max output power500w
Laser wavelength1064nm
Pulse frequency1-300hz
Min.Linewidth0.15mm
Electrical source380v/50hz/100a
X/y/z axis geometric positioning accuracy 0.08mm/1000mm

X/y/z axis re-orientation accuracy 0.04mm
Control systemOffline motion control
Cooling system5p water cooling
Max cutting speed35mm/s
Weight1500kg.


Wood case.

Key Specifications/Special Features:

Features:
Unique "V" shaped laser cavity, higher beam quality in the same power output.
Straight cavity semiconductor model dedicated to production lines and automated production line equipment.
Higher laser quality (M2¡Ü6), smaller spot, intensified energy.

Maintenance-free designing, requires no consumables, longer average failure-free working(over 10, 000 hours).
Red light positioning system, easy to operate.
Improved cooling system, smaller size and better effect.

Applications:
Can mark all metals and a great many of non-metal materials.
Suitable for applications that requires high precision and accuracy in depth markings.
Widely used in electrical components, integrated chips (IC), electric appliance, communication equipments, tools, precise machinery, glass frames, clocks and watches, accessories, automotive accessories, plastic buttons, construction material, packaging, PVC pipes and medical instrument processing and manufacturing.

Available specifications:
Max. laser powers: 50W/75W/100W
Laser wave length: 1,064nm
Beam quality: M2 Ü6
Laser repetition frequencies: Ü30KHz
Marking areas: 70mm x 70mm/100mm x 100mm(standard)
Adjustable marking areas: 140mm x 140mm/170mm x 170mm
Marking depths:Ü0.30mm/Ü0.40mm
Marking linear speed options: Ü7,000mm/s
Min. linear widths: 0.01mm
Min. character: 0.3mm
Repetition accuracy: À0.003mm
Rated power consumptions: 1.5kW/2kW
Supply voltage: 220V//50HZ/8A


Available specifications:
Max. laser powers: 50W/75W/100W
Laser wave length: 1,064nm
Beam quality: M2 Ü6
Laser repetition frequencies: ¡Ü30KHz
Marking areas: 70mm x 70mm/100mm x 100mm(standard)
Adjustable marking areas: 140mm x 140mm/170mm x 170mm
Marking depths: Ü0.30mm/Ü0.40mm
Marking linear speed options: Ü7,000mm/s
Min. linear widths: 0.01mm
Min. character: 0.3mm
Repetition accuracy: À0.003mm
Rated power consumptions: 1.5kW/2kW
Supply voltage: 220V//50HZ/8A

The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.

Pulse 200W JPT Laser Cleaning Machine for Rust Removal Oil Paint Removal

1. Lightweight,energy-saving and maintenance-free Integrated air-cooled structure. Volume only 0.15m�³.
2. 6 preset cleaning processes+ 3 custom ones Corresponding to different usage requirements. Simple operation.
3. Double-wobble Cleaning Head Scanning width up to 190mm.
4. 8 Light Modes Meet various operation requirements.
5. High Power Density and Strong Output.Energy is twice that of ordinary models, effectively addresses issues of difficult cleaning and inefficiency.

1.Main parts: Laser Cutting body, peak power supply, water cooling machine, and controlling cabinet, nice instruction, easy to operate.

2.High cutting precision, good stability, adopts precise ball bearing guide rear , advance numerical controlling system, can process accurate components, whats more, it can keep a stable performance while under long time work.

3.With smooth cutting edge, adopt automatic moving cutting head, can moved smartly according to the surface of the cutting boards, the cutting edge is smooth and nice, has no need to reprocess afterwards.

4.With large cutting scale, widely usage, can cut stainless steel up to 3mm, carbon steel 6mm, the working area is up to 3m*1.5m, the applicable materials includes: carbon steel , stainless steel, aluminum, copper, titanium etc.

5.Price performance ratio is better than other cutting machines, when cut thin boards, it can instead of Co2 laser cutter, CNC cutting bed and plate shears.

Features
1 with new material belt mold, which is high accurate and longer life.
2 laser tube is separated with the working table, this make sure laser tube safety and laser path clean.
3 all the switches the plug base and other connections are not bulgy of surface of the machine, this make sure safety of the workers.
4 two years warranty, while most other company is only 1 year.
M
Gross weight 350kg
Shipping dimensions 1860*1450*1400mm
Optional spare parts Up-down clump, rotary system
Recommended spare parts Laser tube and lens

1.86*2.03*1.4m

450kg

1. YAG lamp-pump solid laser device
2. US made laser Q-Switch
3. CE,SGS

Adopting new-type and high-power solid laser with constant pulse output, YAG metal laser marking machine is designed with advanced configurations, such as, imported ceramic pump cavity, new cooling system and photo system. The main technical parameters, namely, beam quality and photoelectric conversion efficiency, reach the advanced world standard.
Strong stability, long continuous working hours, clear, complete and handsome marks, non-contact processing, this ensure the precision and efficiency of working surface.

Supporting self-created character data base and curve arrangement order, barcode font (see 1D and data matrix, PDF417 2d barcodes), linear filling and loop filling. , changeable texts. Contents of changeable texts can be determined by multiple forms: input via keypad and serial number.

Suitable for fields in hardware building materials, spares and parts, electronic product, computer, electric appliance, hardware accessories and instrument, etc.; widely applicable for various metal and rigid plastic materials.

Technical Parameters:
Working area: 100mm, 100mm,
Marking method: Plane ,convex surface
Laser power: 50W,
Marking length: 0.3mm
Repetition precision: 0.0001mm
Min line width: 0.02mm
Min smallest characters: 0.2mm
Highest resolution: 65335
Working temperature: 0-45 degree
Working humidity: 5-95% (non-condensed water)
Pulse frequency: 1-100Hz Continuo and adjustable)

Installation and training:
1. Without sending engineer
Manual and video will be sent to you for training and learning how to install machine.
Internet remove assistance is available 24hrs every day.
2. With engineer
Engineer will be sent to your country for one week, dealing with the installation and training.
User need to take care of tickets, accommodation, food and cooperating with the engineer we dispatch.
3. If you are here
You got 5 days for free training, if you are in our factory. We will learn you any basic information about
the machine.


Stable plywood case.

Function:
Can cut all kind metals, like mild steel, copper, aluminum, iron, carbon steel, titanium plates, etc.
Features :
1. Working area : 1500*3000mm
2. Cutting speed: 12000mm/min
3. We have professinal after-sale department, and detailed operation videos, and we also support overseas service.
4. Two years warranty, while most other company is only 1 year.

M
Gross weight 2150kg
Shipping dimensions 3800*2250*1980mm
Optional spare parts Nozzles and electrodes
Optional machine size : 1200*1200mm/1300*2500mm/2000*4000mm/2500*6000mm/3000*6000mm/4000*8000mm etc.

JCUT-4040B Desktop CNC Router(15.7X15.7X3.1 inch)

Applications:
Advertisement engraving, advertisement cutting, stone processing cutting, Cu and Al molding cutting, mold manufacturing cutting, wood processing cutting, wood door manufacturing cutting, craft manufacturing cutting, light box cutting, building mold cutting, indoor decoration cutting, wave board processing cutting, light equipment, mold processing cutting, sign and mark manufacturing cutting, acryl board processing cutting, stamp cutting.


Parameters:
Working Area (X*Y*Z):400X400X80mm (15.7X15.7X3.1 inch)
Processing accuracy: 0.01mm
Repositioning accuracy: 0.03mm
Spindle: 1.5KW variable speed, water-cooled
Spindle rotating speed: 0-24000rpm/min
Max Moving Speed: 6000mm/min
Working speed: 0-5000mm/min
Driving mode:Ball screw
Voltage: AC220V/50Hz
Max. Power consumption: 1.9KW
Feeding Height: 80mm
Drive motor:Stepper
Command:G.code, mug, plt , uoo,HPGL
Compatible Software: Type3, Art cut, Art CAM, master CAM software
Certificate:CE, FDA
Pack dimensions: 1050mm X 1050mm X 1600mm wooden trunk
Net weight: 120KG
Option: Rotary axis, vacuum table£¬dust collector, or bigger spindle.



Pack dimensions: 1050mm X 1050mm X 1600mm wooden trunk
Net weight: 120Kg.