Dear sir
ASOKAA ALLOYS is one of the celebrated manufacturer, supplier and
exporter of WELDING ELECTRODES having certifications of,
ISO 9001:2008 ACCREDITED BY TUV-SUD,
PRODUCT IS APPROVED BY BEARUE OF INDIAN STANDARDS
(ISI),
REGISTERED WITH NATIONAL SMALL INDUSTRIES
CORPORATION (NSIC)
As an established supplier in the industry, we can provide the best
products and services to meet all needs. We also have good infrastructures from
machineries, chemical lab, mechanical testing facilities and effective team
work, enjoys the loyalty and good reputation among our clientele worldwide for
good quality products.
OUR PRODUCTS ARE
1. MILD STEEL ELECTRODES
2. LOW HYDROGEN ELECTRODES
3. STAINLESS STEEL ELECTRODES
4. HARD FACING RODS
5. CAST IRON RODS
6. LOW HEAT INPUT ELECTRODES
7. CUTTING & GUOGING
Our Welding electrodes are suitable for number of Industries like
Cement, Thermal Power, Mining, Steel, Sugar, Railways, Transportation
and Fabrication Industries.
(1) Regular power graphite electrode( RP grade Graphite Electrode) . Graphite electrode with current density less than 17a / cm2 is allowed to be used in common power electric furnaces for steelmaking, silicon smelting and yellow phosphorus smelting.
(2) Oxidation resistant coating graphite electrode. A graphite electrode coated with an anti-oxidation protective layer (graphite electrode anti oxidant). The formation of both conductive and high temperature oxidation resistant protective layer can reduce the electrode consumption (19% ~ 50%), prolong the service life of the electrode (22% ~ 60%), and reduce the electric energy consumption of the electrode. The popularization and application of this technology can bring such economic and social effects as follows: 1. The unit consumption of graphite electrode is less, and the production cost is reduced to a certain extent. For example, according to the consumption of 35 graphite electrodes per week and 165 refining heats of LF refining furnace in a steel-making plant without shutdown in the whole year, 373 (153 tons) electrodes can be saved every year by using graphite electrode oxidation resistance technology, and RMB 2585700 can be saved by RMB 16900 per ton of ultra-high power electrode per year. 2 The graphite electrode consumes less electricity, saves the unit electricity consumption of steelmaking, saves the production cost, saves energy! 3. Because the graphite electrode is replaced less times, the labor amount and risk coefficient of operators are reduced, and the production efficiency is improved. 4 Graphite electrode is a high consumption and high pollution product, which has a very important social significance in the days of promoting energy conservation, emission reduction and environmental protection. This technology is still in the stage of research and development in China, and some domestic manufacturers have begun to produce it. It is widely used in Japan and other developed countries. At present, there are also companies that import the anti-oxidation protective coating in China.
(3) High power graphite electrode (HP grade Graphite Electrode). Graphite electrode with current density of 18-25a / cm2 is allowed to be used in high power electric arc furnace for steelmaking.
(4) Ultra high power graphite electrode( UHP grade Graphite Electrode). Graphite electrode with current density greater than 25A / cm2 is allowed. It is mainly used in ultra high power EAF.
47418 Welding Electrodes Rods Suppliers
Short on time? Let Welding Electrodes Rods sellers contact you.
Covered welding electrode
Brand : weldon e-6013
All position/general purpose
Classifications
Is 814 er 4211
Aws : e-6013
Characteristics
Weldon e 6013 is a medium coated rutile type all position general purpose mid steel electrode. It gives a quite and stable arc, steady fusion rate, least spatter and smooth weld bead with radiographic quality. Easy removal of slag and excellent weld quality facilitate multi pass welding
Applications
* suitable for all types of welding structural steel works like column, trusses, grills, bus & truck body building and plant equipments.Suitable for welding ship hult, tanks and vessels, steel frames, steel furniture, steel structurals, etc.
* it is recommended in applicants such as , bogies under frames of railway carriages, wagons, boilers, pressure vessels, general engineering constructions, pipe welding, ship building, truck, bus frames and bodies etc.
* suitable for all types of mild steel structurals, plant machinery pipes, dredgers & trailerÆs etc.
Chemical composition of all weld metal
Element c mn si s p
% (max) 0.04-0.12 0.40-0.620 0.15-0.40 0.03(max) 0.03(max)
Mechanical properties of all weld metal
Uts (n/mm2) ys (n/mm2) elongation l=5d % cvn impact at 0¦c
420-540 350 min 22(min) 50(min)
Note: single values shown above are maximum
Welding current and packing data : dc¦ / ac 50 v
Dia (mm)
2.5 x 350 3.15 x 350 4 x 450
Current (a)
60-90 100-140 140-190
Dia (mm)
135 90 60
Dia (mm)
8 8 8
High efficiency iron powder hydrogen type electrode which is suitable for welding key structure of medium and thick plate.The deposition efficiency can be raised.
Carbon steel welding electrode is suitable to work in all positions with excellent welding technological properties, stable arc less splash, shaped good appearance, easy for removal of slag layer, easy for striking arc and restriking arc.
Used for welding common carbon steel structure, suitable for small thin plates and low class low-allow steel.Sutch as 09mn2.
E3 Tungsten Electrodes deliver superior arc starting, electrode lifetime, and overall cost effectiveness. Users of 2% thoriated tungsten can switch to E3 tungsten with
confidence. E3 requires fewer re-grinds and provides longer overall lifetime when compared to 2%
thoriated. E3 tungsten can be used on DC electrode positive or negative with a pointed end,
or balled for use with AC power sources.
Featues over Thoriated Tungsten
Lower operating temperature
Fewer re-grinds
Improved arc starting
Versatile use
Packaging & Delivery
Packaging Details: 2.5mm:2.5kg/box, 20kg/box, 1tons/pallet.
3.2mm:5kg/box, 20kg/box, 1 tons/pallet.
4.0mm:5kg/box, 20kg/box, 1 tons/pallet.
Delivery Detail: Shipped in 15 days after payment
We are professional in supplier & trader company the electrode, such as : Carbon steel electrode E6013 what is a popular item all over the world, and Stainless steel electrode E308, also Nickel electrode Ni99% etc.
(1) Regular power graphite electrode( RP grade Graphite Electrode) . Graphite electrode with current density less than 17a / cm2 is allowed to be used in common power electric furnaces for steelmaking, silicon smelting and yellow phosphorus smelting.
(2) Oxidation resistant coating graphite electrode. A graphite electrode coated with an anti-oxidation protective layer (graphite electrode anti oxidant). The formation of both conductive and high temperature oxidation resistant protective layer can reduce the electrode consumption (19% ~ 50%), prolong the service life of the electrode (22% ~ 60%), and reduce the electric energy consumption of the electrode. The popularization and application of this technology can bring such economic and social effects as follows: 1. The unit consumption of graphite electrode is less, and the production cost is reduced to a certain extent. For example, according to the consumption of 35 graphite electrodes per week and 165 refining heats of LF refining furnace in a steel-making plant without shutdown in the whole year, 373 (153 tons) electrodes can be saved every year by using graphite electrode oxidation resistance technology, and RMB 2585700 can be saved by RMB 16900 per ton of ultra-high power electrode per year. 2 The graphite electrode consumes less electricity, saves the unit electricity consumption of steelmaking, saves the production cost, saves energy! 3. Because the graphite electrode is replaced less times, the labor amount and risk coefficient of operators are reduced, and the production efficiency is improved. 4 Graphite electrode is a high consumption and high pollution product, which has a very important social significance in the days of promoting energy conservation, emission reduction and environmental protection. This technology is still in the stage of research and development in China, and some domestic manufacturers have begun to produce it. It is widely used in Japan and other developed countries. At present, there are also companies that import the anti-oxidation protective coating in China.
(3) High power graphite electrode (HP grade Graphite Electrode). Graphite electrode with current density of 18-25a / cm2 is allowed to be used in high power electric arc furnace for steelmaking.
(4) Ultra high power graphite electrode( UHP grade Graphite Electrode). Graphite electrode with current density greater than 25A / cm2 is allowed. It is mainly used in ultra high power EAF.
