Product name THM-3C slurry pump
Type THM
pump size 4/3
Capacity 86.4-198m3/h
Head 9-52m
Allowable Max. Power 30kw
Speed 1000-2200r/min
NPSH 4-6m
Introduction
Model Explanation and Performance Chart:
THM-3C
T: Tower pump
H: High Concentration
M: Metal lined
3: Discharge size (inch)
C: Frame type with maximum power
Introduction of Slurry Pump ---- THM Series
THM Series slurry pump is mainly used for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc.
The features of this kind of slurry pump
The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal. The frame plate liner and impeller for THM pump are adoptable of hard metal only.
Bearing assembly of this kind of slurry pump use cylindrical structure, adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication.
The shaft seal of this kind of slurry pump could use the packing seal, expeller seal and mechanical seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
Here are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices.
Wide performance, good NPSH and high efficiency are main character of these kinds of slurry pump. The pump of this type may be installed in multistage series to meet the delivery for long distance.
Main application of this kind of slurry pump
This kind of slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc.
Introduction£º
Model explanation
Tgm-4f
T: our company logo
G: high head
M: metal lined
4: discharge size (inch)
F: frame type with maximum power
Introduction of centrifugal slurry pump ¡ª¡ª tgm series
Tgm series slurry pumps are cantilevered, horizontal slurry pumps, centrifugal slurry pumps. They are designed for the handling of highly abrasive, high-density slurries. This series pump may also be installed in multistage series
The features of this kind of centrifugal slurry pump
The frame plate liner and impeller for tgm series centrifugal slurry pump are made of wear-resistant metal. The shaft seals for the tgm series may choose gland seal or expeller seal. The discharge branch can be oriented to any of the eight positions to suit installations and applications.
Application:
They are designed for the handling of highly abrasive, high density slurries in the metallurgical, mining, coal, power generation, construction material and other industry. The pumps of this type may also be installed in multistage series.
Note: quantity range recommended:50%q¡¯¡üq¡ü100%q¡¯(q¡¯appropriate to capacity at highest efficiency point).
2.Npsh:appropriate to point q recommended at highest speed.
Slurry pump can be widely used in mines, electric power, metallurgy, coal, environmental protection and other industries transport slurry containing abrasive solid particles.Such as metallurgical mill pulp conveying, hydraulic ash thermal power plants, coal washery coal slurry and heavy media delivery, dredging river, river dredging, etc.In the chemical industry, also can carry some corrosive slurry containing crystallization.
This series pumps are contain cantilever and horizontal centrifugal pumps which apply to transport slurry with strong corrosion proof and high concentration.
Slurry pump can be widely used in mines, electric power, metallurgy, coal, environmental protection and other industries transport slurry containing abrasive solid particles.Such as metallurgical mill pulp conveying, hydraulic ash thermal power plants, coal washery coal slurry and heavy media delivery, dredging river, river dredging, etc.In the chemical industry, also can carry some corrosive slurry containing crystallization.
FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes.
PRODUCT COMPATIBILITY:
FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel.
PRODUCT APPLICATIONS:
FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids.
Specifications:-
PRODUCT : FH-35 FH-38 FH-42
CAS No. : 9000-30-0 9000-30-0 9000-30-0
Granulation : FINE FINE FINE
APPEARANCE : OFF WHITE POWDER
MOISTURE : 8% Max. 8% Max. 8% Max.
PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max
ASH : 1.5% Max. 1.5% Max. 1.5% Max.
ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max.
CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min
pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5
VISCOSITY :
(0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42
5 Mins : 37 5 Mins : 39 5 Mins : 43
30 Mins : 39 30 Mins : 42 30 Mins : 45
60 Mins : 40 60 Mins : 43 60 Mins : 47
Www.Hanhe-pump.Com
Hanhe group co., limited
Professional slurry pump dredging pump manufacturer and exporter china.
Our slurry pump are dimensionally interchangeable with warman® slurry pump. Ah, hh, l, m slurry pump, g gravel pump and wn dredging pump.
Designed to be interchangeable with a Warman AH 6/4 Slurry Pump.
FH Series slurry pumps are mainly using for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc.
Structure:
The frame plates of this kind of slurry pump have replaceable wear-resistant metal liners. The impellers are made of wear-resistant metal.
Bearing assembly of this kind of slurry pump use cylindrical structure, adjusting the space between impeller and front liner easily, being removed completely when being repaired. Bearing assembly use grease lubrication.
The shaft seal of this kind of slurry pump could use the packing seal, expeller seal and mechanical seal. The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
Here are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. The pump of this type may be installed in multistage series to meet the delivery for long distance.
Application:
This kind of slurry pump mainly applies in coal washer processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station etc.
We supply complete, ready-to-use packages including pump, motor and frame desinged to your specifications. These pumps are ideal for the chemical transfer pump in plants for chemicals including lime.
WFB series of seal-less self-control self-priming pump adopts no-leakage V-type seal assembly, eliminating the traditional pump packing seal, packing seal, mechanical seal, completely subdued the running, bubbling, dripping, leakingâ??, is to replace the original variety of long-shaft submerged pumps, submersible pumps, submersible pumps, etc. Ideal equipment. Disadvantages of the structure of the pump: First, downtime liquid leakage along the direction of the shaft outward, for frequent starting equipment is not very suitable for the occasion; Second, the power consumed by the secondary impeller is too large, the pump efficiency is low.WFB improved structure for the sealing device, one is to improve the efficiency of the pump, the second is to reduce the power of the motor, the third is to inhibit the leakage of the pump shutdown phenomenon. Sealing device in the movement process without friction, no wear and tear, the service life is more than 10 times longer than similar products. Transplantation of the vacuum pump principle, self-absorption performance is stable and reliable, in particular, the use of â??electric air control valveâ?? truly realised â??a diversion, life-long self-absorptionâ??. High efficiency, low vibration, low noise, flexible movement, easy disassembly, easy to install, no need for foot fixing, eliminating the difficulties of transporting, installing and maintaining the long-shaft submerged pump. With superior self-control function, it can be used with high-tech fields and highly automated series.
Horizontal slurry pump range offer to use in mining, chemical, and industrial applications widely. The pump is designed
for heavy duty applications such as mill discharge, process plant, and tailings, high pressure pipelines, as well as other specialty applications.
The pump provides excellent wear life while maintaining high efficiency during its wear cycle. It helps the new building
plant to start production and recover their cost in a short time with the minimum investment.
Not only our own brand slurry pumps but also it could be interchangeable with other brands on spares and whole pumps.
We have stock on some regular spares. It saves the users' cost on stock and increases their supply chain's efficiency.
Key Features
Bearing assembly - The large diameter shaft with famous brand bearings contributes to long working life.
Liners-Easy to replace and maintain. Hard metal liners are completely interchangeable with rubber or PU.
Casing-Cast iron or ductile iron casing provide high operating pressure capabilities and extra protection on the safety.
Impeller-Hard metal and moulded elastomer impellers are completely interchangeable with each other. High efficiency
and high head designs are also available. And the arge particle is easy to pass through.
FAQ:
1. Are your pump and spares interchangeable with other brands?
Yes. 100% interchangeable, whatever the material, working life and working efficiency.
2. What price of your pump and spares?
Our price is 30~50% of the original but the same working life.
3. What is your lead time?
Some popular spares are in stock which could deliver within 5 days after your PO.
If without stock, we could deliver within 3 weeks.
4. What is your warranty?
One year for the whole pump except the wear parts.
The working life of wet parts is the same as the most famous brand.
5. Do you have OEM service?
Yes. We offer OEM service to our clients.
And our engineers could train the users on site how to start, use and maintain the pumps.
3/2D-HH High Head Slurry Pump is designed to produce high heads per stage at high pressures. Commonly used for long distance transport lines, the high head slurry pump lines can often satisfy application duties with a single pump where others require multiple pumps in series.
Tobee 4/3E-HH High Head Slurry Pump is fit for a variety of applications ranging from filter press feeds to pipeline transport staging pumps. The high heads along with sturdier wear parts makes these pumps some of the most rugged in the slurry pump line. Extensive exterior ribbing allows for higher heads to be reached with a single slurry pump, and bulked up wet end parts handle the toughest applications in the field today.
Design Features:
Ductile iron fully lined casing provides durability, strength and long service life.
Multi-stage high pressure operation to 750 psi.
Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime.
Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and low operating costs.
Large, open internal passages designed to maximize wear life and lower operating costs.
Thick elastomer and alloy liners provide superior corrosion resistance and maximum wear life.
Full flush gland, low flow, and dry running centrifugal seals reduce flush water usage minimizing pump operating costs.
Tobee 6x4D-AH Slurry Pump is a single-stage, single-suction and horizontal heavy duty centrifugal slurry pump with a cantilever design, The 6x4 slury pumps are mainly used in solids containing applications. Depending on process conditions, equipment should be suitable for highly abrasive or corrosive liquids.
Design Features:
Cylindrical structure of bearing assembly: convenient to adjust the space between impeller and front liner and can be removed completely.
Interchangeable anti-abrasive wet parts made of high-chrome alloys.
The discharge branch can be oriented to any eight positions at the interval of 45 degrees.
Various drive types: DC (direct connection), V-belt drive, gear box reducer, hydraulic couplings, VFD, SCR control etc.
The shaft seal uses the packing seal, expeller seal and mechanical seal.
Tobee 14x12ST-AH Slurry Pump is made for high wearing and heavy duty applications. 14x12 slurry pumps and replacement parts are used worldwide industries like mining, mineral processing, power generation, aggregate processing, or any type of slurry pumping system. It is especially for handling the toughest and most abrasive applications.
Design Features:
Power End
Labyrinth bearing isolators to protect internal components during wash-down cycles.
Clearances can be easily adjusted to maintain efficiency while optimizing performance and extending wear life.
Over-sized, self-aligning spherical roller bearings for trouble free operation.
Heavy duty bearing assembly, 50,000 hour minimum L10 bearing life, Distortion free bearing clamp system ensures maximum bearing life and prevents premature fatigue.
Tobe 16x14TU-AH Slurry Pumps provide a ideal replacement for many OEM slurry pumps used in Minerals processing plant, such as Mill Discharge, cyclone feed, transfer slurry tailing, dewatering, pipeline, Power plant, Chemical Process, sand and gravel process, and any other industry application need to transport heavy duty abrasive and corrosion medium.
Design Features:
Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime
Ductile iron fully lined casing provides durability, strength, safety, and long service life
Large diameter, slow turning, high efficiency slurry pump impellers designed to achieve maximum wear life and low operating costs
Large, open internal passages designed to reduce internal velocities, maximise wear life and lower operating costs
Thick elastomer or alloy bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and interchangeability to reduce overall maintenance costs and maximise wear life
Minimal shaft/impeller overhang reduces shaft deflection and increases packing life
Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the slurry pump, resulting in reliable operation and prolonged bearing life
