Product mode:
Size(mm):60,90
Packing:500PCS/ROLL
Shipped:By 20' container vessel
Product advantages:Heat-resistant adhesive,Even if the uneven surface can be affixed firmly,resistance friction,resistance dirt, resistance oil and resistance weather are good;the max resitance weather85°C;Suitable for bar code
The test must be carried out in a simulated real use environment.
The use of bar codes to identify semi-finished products can optimize the production process and improve product quality, but the temperature requirements limit the use of bar codes. At the same time, because the billet surface is very rough or even the presence of scales, and sometimes also in the outdoor storage of a certain time, so that the application of labels more difficult. Our company offers a temperature-resistant 400 ° C-800 ° C label to address the different needs. At the same time, you can waterproof, weathering, can be stored in the outdoor for more than 1 year does not fall off.
We are suppliers and exporters of Inconel alloy Rod, Pipes, Tubes, Plate, Fitting, Flanges, Flat etc in the grade Inconel 600, 601, 625, 718, Incoloy 800, 801, 825 etc.
Explore the strength and lightweight characteristics of our 6063-T6 aluminum billets, tailored for aerospace applications. With a perfect balance of strength and malleability, these billets provide the foundation for manufacturing components that demand high-performance and reliability in the aerospace industry.
* Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
* Technique : Hot rolled,cold rolled
Surface Treatment
* Clean, blasting and painting according to customer requirement
Thickness tolerance
+ 0.1mm
* Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
* Shipment time : Within 7-15 workdays after receiving deposit or L/C
Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity : 250,000 tons/year
* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
* Ordinary low alloy steel is a kind of ordinary alloy steel containing a small amount of alloy elements (in most cases, the total amount of w does not exceed 3%). This kind of steel has high strength, good comprehensive properties, corrosion resistance, wear resistance, low temperature resistance, and good cutting and welding properties.
* Under the condition of saving a lot of rare alloy elements (such as nickel and chromium), usually 1 t ordinary low alloy steel can be used for 1.2-1.3 carbon steel, and its service life and scope of use are much longer than carbon steel. Ordinary low alloy steel can be smelted in open hearth furnace and converter with general smelting method, and the cost is close to that of carbon steel.
Material : API5L
Thickness : 0.1mm-300mm or as required
Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique : Hot rolled,cold rolled
Surface Treatment : Clean, blasting and painting according to customer requirement
Thickness tolerance : �±0.1mm
Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time : Within 7-15 workdays after receiving deposit or L/C
Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity : 250,000 tons/year
* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.
PMMA-ACRYLIC MIX COLORS, aprox. 95% STRIPS (LABELS CUT-OFF) EXTRUSION GRADE and aprox. 5% Cuttings White Color From The Production Of Tubs (clean, Without Glass Fiber) Cast Grade.
Post industrial. Materials are bulk.
Can load bulk in 1x40' Open Top container approx. 20-24 MT.
Ready for shipment. Photos are available upon request.
If you are interested kindly contact us for more information (price, available quantity etc.).
You are welcome to visit our company premises and supervise our materials.
Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
192 is the steel of carbon structural steel, which is a kind of alloy steel and carbon steel. The carbon content is about 0.05%~0.70%, and some can reach up to 0.90%. It can be divided into ordinary carbon structural steel and high-quality carbon structural steel.
Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.
Material
A192
Thickness
0.1mm-300mm or as required
Standard
AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique
Hot rolled,cold rolled
Surface Treatment
Clean, blasting and painting according to customer requirement
Thickness tolerance
�±0.1mm
Application
It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time
Within 7-15 workdays after receiving deposit or L/C
Export packing
Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity
250,000 tons/year
Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for
drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.
Warehouse Storage
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Performance and application of material ST37: the material has good performance, that is, through cold rolling, it can obtain cold rolled strip and steel plate with thinner thickness and higher precision, with high straightness, high surface finish, clean and bright surface of cold rolled plate in Taiwan Strait, easy to be coated, various varieties, wide application, high stamping performance, non aging, and low yield point.
Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.
Material
ST37
Thickness
0.1mm-300mm or as required
Standard
AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique
Hot rolled,cold rolled
Surface Treatment
Clean, blasting and painting according to customer requirement
Thickness tolerance
�±0.1mm
Application
It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time
Within 7-15 workdays after receiving deposit or L/C
Export packing
Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity
250,000 tons/year
Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for
drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.
can supply REBARS as per below: -Size: 6mm to 50 mm -Length: 6 meters up to 16 meters -Packing: Once folded bundles available.
hese corrugated steel bars are used as tension devices in the construction of concrete slabs and walls, as well as decorative/ornamental grille work. When used in concrete constructions, these help to strengthen and hold concrete when it is compressed, and come in a wide variety of sizes to fit various building construction needs. At ARC. AVAILABLE IN 3/8 (10mm), 5/8 (16mm), (20mm), (12mm), 1 (25mm) and 1 (32mm)
We have a wide variety stock of rebar, available dimensions from 8 mm to 32 mm,grades 60,40 ASTM A615,and BS4449, lengths 4,5,6,9,and 12 meters,plain,and deformed bars. Material SD390/490/400,B500B/GR460B,HRB400/500,ASTM A615 GR40/60 Standard BS4449,JIS,ASTM/A615 Length 6m,12m Application Widely used in construction industry.
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
We are leading Barcode Label Manufacturers in Delhi is a company that produces barcode labels for various products. These labels are used to identify and track products in the supply chain. The company produces labels for both businesses and consumers. The company has a wide variety of label products that are made from different materials. The company also offers custom label printing services.
If you are looking for a reliable and affordable Barcode Label Manufacturers, then you have come to the right place. At our company, we also export a wide range of Inventory Barcode Labels that are perfect for all your needs. Whether you need labels for your products, for your inventory, or for any other purpose, we have the perfect solution for you.
We understand that finding the right Barcode Labels Manufacturers in Delhi can be a difficult and time-consuming task. That is why we offer a free consultation service to help you find the perfect labels for your needs. We will work with you to understand your requirements and then recommend the best possible solution for you. Once you have decided on the right barcode labels for your needs, we will print them out and ship them to you within 24 hours. We understand the importance of timely delivery, and we will make sure that your labels arrive on time and in perfect condition.
We are the leading barcode labels exporters & manufacturers in Delhi.
We are leading barcode labels exporters in Delhi. We offer a wide range of barcode label products that are perfect for use in a variety of applications, including product labeling, asset tracking, and inventory management. Our labels are available in a variety of sizes, shapes, and materials to suit your specific needs.
Not every label is formed equal. There are thousands of varied label and tag materials available â?? each with their own set of features that affect durability and printer performance. to form sure your labels match your needs, our material sciences experts have pre-tested, selected and authorized the highest-performing barcode label and tag materials to assure durable print and minimal printer wear and tear, while also considering your budget and application.
About uses of Monel400 alloy: various heat exchange equipment, boiler feed water heaters, pipelines, containers, pumps, valves, shafts, etc. in petroleum and chemical processing, seawater desalination equipment, salt production equipment, propeller shafts, gasoline and water tanks, etc.
Standard
JIS, AISI, ASTM, GB, DIN, EN, BS ETC.
Material
Monel400
Specifications
Round bar
Diameter:0.1~500mm
Hexagonal bar
Size: 2mm~100mm
Flat bar
Thickness
0.3~200mm
Width
1~2500mm
Square bar
Size: 1mm*1mm~800mm*800mm
Length
2m, 5.8m, 6m, or as required.
Surface
Black, peeled, polishing, bright, sand blast, hair line, etc.
Price Term
Ex-work, FOB, CFR, CIF, etc.
Export to
Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
Viet Nam, Ukraine, Brazil, South Africa, etc.
Delivery Time
Standard size is in stock,prompt delivery or as order's quantity.
Package
Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM
Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
12. Widely used in various vehicle parts
13. Wide application and furniture decoration industry
14. Widely used in various mechanical equipment
15. Widely used in various pipelines
16. Widely used in various construction machinery
17. Applied to household appliances
18. Applied to electronic communication equipment
and the project, in order to ensure the quality of the project.
904L tainless steel round bar (super austenitic stainless steel) is a high alloyed austenitic stainless steel with very low carbon content. It has good corrosion resistance in dilute sulfuric acid and is specially designed for environments with severe corrosion conditions. It has high chromium content and sufficient nickel content. The addition of copper makes it have strong acid resistance, especially high resistance to chloride interstitial corrosion and stress corrosion cracking. It is not easy to appear corrosion spots and cracks. Its pitting resistance is slightly better than that of other steels. It has good processability and weldability, and can be used for pressure vessels.
Standard
JIS, AISI, ASTM, GB, DIN, EN, BS ETC.
Material
904L
Specifications
Round bar
Diameter:0.1~500mm
Hexagonal bar
Size: 2mm~100mm
Flat bar
Thickness
0.3~200mm
Width
1~2500mm
Square bar
Size: 1mm*1mm~800mm*800mm
Length
2m, 5.8m, 6m, or as required.
Surface
Black, peeled, polishing, bright, sand blast, hair line, etc.
Price Term
Ex-work, FOB, CFR, CIF, etc.
Export to
Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
Viet Nam, Ukraine, Brazil, South Africa, etc.
Delivery Time
Standard size is in stock,prompt delivery or as order's quantity.
Package
Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM
Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
12. Widely used in various vehicle parts
13. Wide application and furniture decoration industry
14. Widely used in various mechanical equipment
15. Widely used in various pipelines
16. Widely used in various construction machinery
17. Applied to household appliances
18. Applied to electronic communication equipment
2507 stainless steel is used in oil and natural gas industry; Offshore stone skyshatter oil platform (heat exchanger pipe, water treatment and water supply system, fire protection system, water spraying system, water stabilization system; petrochemical equipment; desalination (desalination) equipment (and high-pressure pipe and seawater pipe in the equipment). Mechanical and structural components that require both high strength and high corrosion resistance: fuel (waste) gas purification equipment.
Standard
JIS, AISI, ASTM, GB, DIN, EN, BS ETC.
Material
2507
Specifications
Round bar
Diameter:0.1~500mm
Hexagonal bar
Size: 2mm~100mm
Flat bar
Thickness
0.3~200mm
Width
1~2500mm
Square bar
Size: 1mm*1mm~800mm*800mm
Length
2m, 5.8m, 6m, or as required.
Surface
Black, peeled, polishing, bright, sand blast, hair line, etc.
Price Term
Ex-work, FOB, CFR, CIF, etc.
Export to
Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
Viet Nam, Ukraine, Brazil, South Africa, etc.
Delivery Time
Standard size is in stock,prompt delivery or as order's quantity.
Package
Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM
Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
12. Widely used in various vehicle parts
13. Wide application and furniture decoration industry
14. Widely used in various mechanical equipment
15. Widely used in various pipelines
16. Widely used in various construction machinery
17. Applied to household appliances
18. Applied to electronic communication equipment
* Use of 2205 Stainless steel round bar: 1. The heater is generally used in the oil refining unit; 2. Chemical plant equipment pipeline; 3. Fast cooling cylinder for solid solution used in textile industry; 4. Seamless steel pipe for heat exchanger and condenser. 5. High pressure seamless steel pipe for food (gb-2000) is a high-quality carbon structural steel and alloy steel seamless steel pipe suitable for chemical equipment and pipes with working temperature of - 40~400 C and working pressure of 10~30ma. 6. Seamless steel pipes for geological drilling and oil drilling control. 7. Cracking pipe for petrochemical industry is used to transport high-temperature and high-pressure fluid on fertilizer equipment.
Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
Viet Nam, Ukraine, Brazil, South Africa, etc.
Delivery Time
* Standard size is in stock,prompt delivery or as order's quantity.
Package
Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM
Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded
articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
12. Widely used in various vehicle parts
13. Wide application and furniture decoration industry
14. Widely used in various mechanical equipment
15. Widely used in various pipelines
16. Widely used in various construction machinery
17. Applied to household appliances
18. Applied to electronic communication equipment
27073 Used In Round Bar Side Labeling Suppliers
Short on time? Let Used In Round Bar Side Labeling sellers contact you.
