Find Verified Upvc Tee Suppliers, Manufacturers and Wholesalers

We provide all branded company's products in every size, quality and quantity as per customer requirement.

Nirmaan Pipes is one of the leading manufacturers of UPVC Fitiings in Eastern India. Nirmaan UPVC Fittings are manufactured in strict accordance to the standards of ASTM-D-2467 and are joined and installed with Nirmaan UPVC pipes manufactured according to ASTM-D-1785.

Nirmaan Pipes is one of the leading manufacturers of UPVC Fitiings in Eastern India. Nirmaan UPVC Fittings are manufactured in strict accordance to the standards of ASTM-D-2467 and are joined and installed with Nirmaan UPVC pipes manufactured according to ASTM-D-1785.

Tee

ASME B16.11

Rating : 3000 PSIG

Material : Forged Steel (A105)

Ends : Screwed, Socket Weld

Specials : IBR

Size : 15mm

Notes :

Available Valve Size :
2000 PSIG 15mm to 50mm
3000 PSIG 15mm to 50mm
6000 PSIG 15mm to 50mm
9000 PSIG 15mm to 40mm

Material : LF2, F5, F9, F11, F22, F304, F304L, F304H, F316, F316L, F316H, F91, F51, F321H, F321

Can supply:

UPVC Rigid Window-door Profile Cuttings Mix Colour (White And Brown) Bales.
Post industrial.
Can load in 1x40' HC container approx. 25 MT (10%)


Ready for shipment. Photos are available upon request.

If you are interested kindly contact us for more information (price, available quantity etc.).
You are welcome to visit our company premises and supervise our materials.

Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.

We are leading manufacturer of Brass Tee.

Pipe Tee

DIRECTIONS FOR USE:
Shake well before using.
Keep container closed when not in use.
Set time is the time required before joint can safely be handled.
Cure time is the time required before joint can be pressure tested.

1. Cut pipe square with saw or hand cutter. Remove all burrs.
2. Check dry fit of pipe and fitting. Pipe should easily go way into fitting. If pipe bottoms into fitting
it should be very snug.
3. Pipe and Fitting should be free of dirt, grease and other foreign materials. If necessary clean pipe and
fitting using RPC-WELD Pipe Cleaner. Primer is highly recommended for 3 and larger diameter installation.
Apply liberal coat. Primer will start softening surface of pipe and fitting thus ensuring superior joint.
4. Use applicator supplied with the can or suitable applicator at least the size of the pipe diameter
5. Apply liberal coat of cement to the pipe (equal to depth of fitting) and adequate coat inside of fitting.
Make sure there is no uncoated surface. Avoid puddling of cement, it may weaken the joint.
6. Immediately insert pipe into fitting with twisting motion. Cement should be wet. If it has dried recoat both parts.
Use sufficient force to ensure pipe bottoms into fitting.
7. Hold joint together for 30-40 seconds to make sure pipe is not pushed out longer time if temperature is low
and for larger pipes.
8. Allow 15 minutes set time before handling the assembly and 2 hours cure time if temperature is below 16 C or
60 F Longer cure time may be required for larger pipe and /or temperature is below 16 C or 6

Raw Materials from U.S.A

Door and Window Sealing - It is fitted into uPVC window and door profiles to create airtight and watertight seals.

Dust and Sound Protection - Helps prevent dust, noise, and air infiltration in residential and commercial buildings.

Weather Resistance -Provides insulation against rain, wind, and temperature changes.

Glass Fitting Support -Sometimes used between glass and uPVC profiles to absorb shock and improve grip.

Thermal Insulation - Reduces heat transfer, making windows and doors more energy-efficient.

SS Wrought Fitting Buttweld Unequal Tee

FORGED FITTINGS:- Socketweld & Screwed Fittings such as Tee, Elbow,
Union, Cross, Plug, Sawage Nipple, Couplings, Weldolet, Socketolet,
Dimension as per ANSI B 16.11. Material Conforming to A105 & ASTM
A182, F304, F316, F9, F5,F11, F22.
Price - 1 USD to 1000 USD

Size :
1/8" NB TO 48" NB. (Buttweld & 100% X-Ray Welded, Fabricated)

Thickness :
SCH: 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS, Custom Thickness.

Price unit - Per piece

CS Wrought Fitting Buttweld Cross Tee
Buttweld fittings are available in various grades, primarily categorized by material type (carbon steel, stainless steel, alloy steel, etc.) and specific material standards (like ASTM A234 for carbon steel or ASTM A403 for stainless steel). Within these categories, different grades (e.g., WPB, WP304/304L, WP316/316L) are specified, each with its own chemical composition and mechanical properties.
Here's a breakdown of common buttweld fitting grades:
1. Carbon Steel:
ASTM A234 WPB: This is the most common grade for carbon steel buttweld fittings, known for its weldability and suitability for general-purpose applications.
ASTM A234 WPC: Another carbon steel grade, often used in higher-pressure applications.
MSS-SP-75 WPHY: High-yield carbon steel grades (e.g., WPHY 42, 46, 52, 56, 60, 65, 70) used in high-pressure pipelines.
ASTM A420 WPL3/WPL6: Low-temperature carbon steel grades.
2. Stainless Steel:
ASTM A403 WP304/304L/304H: Austenitic stainless steel grades, with 304L being a low-carbon version for enhanced weldability.
ASTM A403 WP316/316L/316H: Austenitic stainless steel grades, with 316L being a low-carbon version, and 316Ti offering enhanced high-temperature strength.
Other Grades: 317/317L, 321, 310, 347, 904L, 2205 Duplex.
3. Alloy Steel:
ASTM A234 WP1/WP5/WP9/WP11/WP22/WP91: These grades are used in high-temperature and high-pressure applications.
4. Other Materials:
Nickel Alloys: Monel, Nickel, Inconel.
Copper Nickel: CuNi10Fe1Mn, CuNi30Mn1Fe.
Aluminum, Titanium, etc.: Various other materials are also used for specific applications.

ASME B16.9 is a common standard for buttweld fittings, specifying dimensions and tolerances.

-----------
Price - 1 USD to 1000 USD
Price unit - Per piece
----------
ASME B16.9 Stainless Buttweld Pipe Fittings: ASTM A403 WP 304/ 304L/ 304H/ 316/ 316L/ 317/ 317L/ 321/ 310/ 347/ 904L/2205 Duplex

ASME B16.9 Carbon Buttweld Pipe Fittings: ASTM A234 WPB / A420 WPL3/ A420 WPL6/ MSS-SP-75 WPHY 42/46/52/56/60/65/70

ASME B16.9 Alloy Butt Weld Pipe Fittings: ASTM A234 WP1/ WP5/ WP9/ WP11/ WP22/ WP91

Other Materials Of ASME B16.9 Buttweld Fittings Manufacturer in India: Monel Fittings, Nickel Fittings, Inconel Fittings, Hastelloy Fittings, Copper Fittings, Brass Fittings, Bronze Fittings, Titanium Fittings, Tantalum Fittings, Bismuth Fittings, Aluminium Fittings, Zinc Fittings, Lead Fittings, etc.

ASME B16.9 Copper Nickel Butt Weld Pipe Fittings: CuNi10Fe1Mn, CuNi30Mn1Fe

Size :
1/8" NB TO 48" NB. (Buttweld & 100% X-Ray Welded, Fabricated)

Thickness :
SCH: 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS, Custom Thickness.

CS Wrought Fitting Buttweld Unequal Tee

Buttweld fittings are available in various grades, primarily categorized by material type (carbon steel, stainless steel, alloy steel, etc.) and specific material standards (like ASTM A234 for carbon steel or ASTM A403 for stainless steel). Within these categories, different grades (e.g., WPB, WP304/304L, WP316/316L) are specified, each with its own chemical composition and mechanical properties.
Here's a breakdown of common buttweld fitting grades:
1. Carbon Steel:
ASTM A234 WPB: This is the most common grade for carbon steel buttweld fittings, known for its weldability and suitability for general-purpose applications.
ASTM A234 WPC: Another carbon steel grade, often used in higher-pressure applications.
MSS-SP-75 WPHY: High-yield carbon steel grades (e.g., WPHY 42, 46, 52, 56, 60, 65, 70) used in high-pressure pipelines.
ASTM A420 WPL3/WPL6: Low-temperature carbon steel grades.
2. Stainless Steel:
ASTM A403 WP304/304L/304H: Austenitic stainless steel grades, with 304L being a low-carbon version for enhanced weldability.
ASTM A403 WP316/316L/316H: Austenitic stainless steel grades, with 316L being a low-carbon version, and 316Ti offering enhanced high-temperature strength.
Other Grades: 317/317L, 321, 310, 347, 904L, 2205 Duplex.
3. Alloy Steel:
ASTM A234 WP1/WP5/WP9/WP11/WP22/WP91: These grades are used in high-temperature and high-pressure applications.
4. Other Materials:
Nickel Alloys: Monel, Nickel, Inconel.
Copper Nickel: CuNi10Fe1Mn, CuNi30Mn1Fe.
Aluminum, Titanium, etc.: Various other materials are also used for specific applications.

ASME B16.9 is a common standard for buttweld fittings, specifying dimensions and tolerances.

-----------
Price - 1 USD to 1000 USD
Price unit - Per piece
----------
ASME B16.9 Stainless Buttweld Pipe Fittings: ASTM A403 WP 304/ 304L/ 304H/ 316/ 316L/ 317/ 317L/ 321/ 310/ 347/ 904L/2205 Duplex

ASME B16.9 Carbon Buttweld Pipe Fittings: ASTM A234 WPB / A420 WPL3/ A420 WPL6/ MSS-SP-75 WPHY 42/46/52/56/60/65/70

ASME B16.9 Alloy Butt Weld Pipe Fittings: ASTM A234 WP1/ WP5/ WP9/ WP11/ WP22/ WP91

Other Materials Of ASME B16.9 Buttweld Fittings Manufacturer in India: Monel Fittings, Nickel Fittings, Inconel Fittings, Hastelloy Fittings, Copper Fittings, Brass Fittings, Bronze Fittings, Titanium Fittings, Tantalum Fittings, Bismuth Fittings, Aluminium Fittings, Zinc Fittings, Lead Fittings, etc.

ASME B16.9 Copper Nickel Butt Weld Pipe Fittings: CuNi10Fe1Mn, CuNi30Mn1Fe

Size :
1/8" NB TO 48" NB. (Buttweld & 100% X-Ray Welded, Fabricated)

Thickness :
SCH: 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS, Custom Thickness.

CS Wrought Fitting Buttweld Equal Tee

Buttweld fittings are available in various grades, primarily categorized by material type (carbon steel, stainless steel, alloy steel, etc.) and specific material standards (like ASTM A234 for carbon steel or ASTM A403 for stainless steel). Within these categories, different grades (e.g., WPB, WP304/304L, WP316/316L) are specified, each with its own chemical composition and mechanical properties.
Here's a breakdown of common buttweld fitting grades:
1. Carbon Steel:
ASTM A234 WPB: This is the most common grade for carbon steel buttweld fittings, known for its weldability and suitability for general-purpose applications.
ASTM A234 WPC: Another carbon steel grade, often used in higher-pressure applications.
MSS-SP-75 WPHY: High-yield carbon steel grades (e.g., WPHY 42, 46, 52, 56, 60, 65, 70) used in high-pressure pipelines.
ASTM A420 WPL3/WPL6: Low-temperature carbon steel grades.
2. Stainless Steel:
ASTM A403 WP304/304L/304H: Austenitic stainless steel grades, with 304L being a low-carbon version for enhanced weldability.
ASTM A403 WP316/316L/316H: Austenitic stainless steel grades, with 316L being a low-carbon version, and 316Ti offering enhanced high-temperature strength.
Other Grades: 317/317L, 321, 310, 347, 904L, 2205 Duplex.
3. Alloy Steel:
ASTM A234 WP1/WP5/WP9/WP11/WP22/WP91: These grades are used in high-temperature and high-pressure applications.
4. Other Materials:
Nickel Alloys: Monel, Nickel, Inconel.
Copper Nickel: CuNi10Fe1Mn, CuNi30Mn1Fe.
Aluminum, Titanium, etc.: Various other materials are also used for specific applications.

ASME B16.9 is a common standard for buttweld fittings, specifying dimensions and tolerances.

-----------
Price - 1 USD to 1000 USD
Price unit - Per piece
----------
ASME B16.9 Stainless Buttweld Pipe Fittings: ASTM A403 WP 304/ 304L/ 304H/ 316/ 316L/ 317/ 317L/ 321/ 310/ 347/ 904L/2205 Duplex

ASME B16.9 Carbon Buttweld Pipe Fittings: ASTM A234 WPB / A420 WPL3/ A420 WPL6/ MSS-SP-75 WPHY 42/46/52/56/60/65/70

ASME B16.9 Alloy Butt Weld Pipe Fittings: ASTM A234 WP1/ WP5/ WP9/ WP11/ WP22/ WP91

Other Materials Of ASME B16.9 Buttweld Fittings Manufacturer in India: Monel Fittings, Nickel Fittings, Inconel Fittings, Hastelloy Fittings, Copper Fittings, Brass Fittings, Bronze Fittings, Titanium Fittings, Tantalum Fittings, Bismuth Fittings, Aluminium Fittings, Zinc Fittings, Lead Fittings, etc.

ASME B16.9 Copper Nickel Butt Weld Pipe Fittings: CuNi10Fe1Mn, CuNi30Mn1Fe

Size :
1/8" NB TO 48" NB. (Buttweld & 100% X-Ray Welded, Fabricated)

Thickness :
SCH: 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS, Custom Thickness.

Name
Set Girls Classif Retro Tees

Material
dress made from soft and breathable premium imported fabric, ideal for formal or semi-formal activities. Available in various sizes for adults.

Advantages:
High-quality fabric
Comfortable for all-day wear
Affordable wholesale price
Various models available
Attractive design

We are exporters of stainless steel socket weld fittings like elbow, tee, reducer, cross, coupling, cap, union etc. in grade F347, F347H, F321, F321H, F310, F309, F317L, F51, F53 etc.

Upvc Pipes And Fittings All Class And Specification

Key Features:

- Durable and resistant to corrosion, moisture, and chemicals, making it suitable for both indoor and outdoor use.

- Low maintenance: It doesn't require painting or frequent upkeep, saving time and effort.

- Energy-efficient: Often used in windows and doors, it helps improve thermal insulation, reducing energy loss.

- Cost-effective: Offers a good balance between performance and price compared to other materials like wood or metal.

- Versatile: Can be easily shaped and customized into various profiles, fitting different design needs.

Common applications include window frames, door frames, pipes, and cladding, thanks to its combination of strength, longevity, and practicality.