Ulpsm-h2s 968-003 ultra-low power analog h2s sensor module description
Quickly integrate hydrogen sulfide sensing into your system with very low power consumption and a simple analog sensor signal output.
The ulpsm converts the hydrogen sulfide sensors linear current signal output to a linear voltage signal, while maintaining the sensor at its ideal biased operation settings.
Ulpsm-h2s 968-003 ultra-low power analog h2s sensor module benefits
0 to 3 v analog signal output
Low power consumption < 45 uw
Fast response
On-board temperature sensor
Easy sensor replacement
Standard 8-pin connector
Ulpsm-h2s 968-003 ultra-low power analog h2s sensor module applications
Fixed industrial safety monitoring
Portable industrial safety monitoring
Portable personal safety monitor
Indoor air quality monitoring
Outdoor air quality monitoring
Bad breath/halitosis sensing
Ulpsm-h2s 968-003 ultra-low power analog h2s sensor module performance characteristics
Measurement range: 0 to 50 ppm
Lower detection limit: 0.3 ppm
Resolution: 0.15 ppm
Accuracy: < â± 2 % of reading
Response time t90: < 30 seconds
Power-on stabilization time: 60 minutes recommended
ULPSM-O3 968-005 Ultra-Low Power Analog O3 Sensor Module DESCRIPTION
Quickly integrate Ozone sensing into your system with very low power consumption and a simple analog sensor signal output.
The ULPSM converts the Ozone sensor??s linear current signal output to a linear voltage signal, while maintaining the sensor at its ideal biased operation settings.
ULPSM-O3 968-005 Ultra-Low Power Analog O3 Sensor Module BENEFITS
* 0 to 3 V Analog Signal Output
* Low Power Consumption < 45 uW
* Fast Response
* On-board Temperature Sensor
* Easy Sensor Replacement
* Standard 8-pin connector
ULPSM-O3 968-005 Ultra-Low Power Analog O3 Sensor Module APPLICATIONS
* Fixed Industrial Safety Monitoring
* Portable Industrial Safety Monitoring
* Portable Personal Safety Monitor
* Indoor Air Quality Monitoring
* Outdoor Air Quality Monitoring
* Air Purification Control
ULPSM-O3 968-005 Ultra-Low Power Analog O3 Sensor Module PERFORMANCE CHARACTERISTICS
* Measurement Range: 0 to 20 ppm
* Lower Detection Limit: 0.3 ppm
* Resolution: 0.15 ppm
* Accuracy: < ± 2 % of reading
* Response Time T90: < 30 seconds
* Power-On Stabilization Time: 60 minutes recommended
CO/H2S-D2 Miniature Size Carbon Monoxide + Hydrogen Sulfide Sensor Introduction
The world wide use of multigas, portable, personal safety monitors has grown since the 1970s to include an ever increasing number of industries. The one requirement in common to the majority of these instruments is the need to measure both Carbon Monoxide and Hydrogen Sulfide simultaneously.
Alphasense now offers a compact, dual gas sensor which allows designers to reduce significantly instrument size and cost. The D2 sensor provides a unique approach to the dual gas sensor in both its size and working electrode configuration. The use of a high capacity filter over the Carbon Monoxide working electrode eliminates Hydrogen Sulfide cross sensitivity to Carbon Monoxide.
Proven in the field over many years, these sensors perform well even under long term, challenging conditions.
* Range: 1000 ppm CO limit of performance warranty
* Range: 100 ppm H2S limit of performance warranty
* Sensitivity: 27 to 55 nA/ppm in 400ppm CO
* Sensitivity: 90 to 160 nA/ppm in 20ppm H2S
* Response time t90: < 25 (s) from zero to 400ppm CO
* Response time t90: < 30 (s) from zero to 20ppm H2S @ 20 deg C
* Temperature range: -30 to 50 deg C
* Humidity range: 15 to 90 %rh continuous
* Pressure range: 80 to 120kPa
H2S-A1 Hydrogen Sulfide Sensor H2S Sensor Description
Alphasense Hydrogen Sulfide gas sensors operate using well-known fuel cell technology.
H2S-A1 Hydrogen Sulfide Sensor size:
20mm diameter, the industry standard size for portable gas detectors
With very high sensitivity and low zero, accurate and stable readings are possible when measuring current concentration ranges from ppb to 1% H2S.
H2S-A1 Hydrogen Sulfide Sensor H2S Sensor Specification
* Range: 100ppm H2S limit of performance warranty
* Sensitivity: 550 to 875 nA/ppm in 20ppm H2S
* Response time t90: < 35s from zero to 20ppm H2S
* Resolution: < 0.05 RMS noise (ppm equivalent)
* Temperature range: -30 to 50'C
* Pressure range: 80 to 120 kPa
* Humidity range: 15 to 90 % rh continuous
* Weight: < 6 g
Matched Transmitter board for H2S-A1 H2S Sensor
4-20 mA Digital Transmitter Board
* Factory calibration, custom-set for immediate use
* Digital zero, sensitivity and temperature compensation
* Digital and 4-20mA output
* Biased or unbiased operation
* Calibration and range change
466 Ulpsm H2S 968 003 Analog H2S Sensor Module Suppliers
Short on time? Let Ulpsm H2S 968 003 Analog H2S Sensor Module sellers contact you.
Honeywell BW Solo is a easy to service single-gas detector with BLE connectivity that provides real-time visibility into the status and safety of hazardous-area workers, helping companies respond faster, more knowingly and decisively to safety incidents. The first single-gas detector with the 1 Series sensor for CO, H2S and O2
Features & Benefits:
User-friendly operation,
Easy-to-read display for multiple languages,
Lightweight convenience,
Ease of maintenance,
Serviceability,
The new 1-Series sensor for enhanced reliability,
Connected Bluetooth Low Energy (BLE) capabilities.
Sensor for measuring H2 purity KQL1500
As a leader in the electromechanical equipment industry, YOYIK has a rich product line, covering hydroelectric generator sets, coal-fired generator sets and their accessories, as well as electrical and electronic product processing. Based on scientific management, the company has passed the ISO9002 quality system certification, adhered to authentic direct sales, and has become the preferred partner of many users with excellent quality and all-round services.
Yoyik can offer many spare parts for power plants as below:
#DF-Sensor for measuring H2 purity KQL1500-DF
LVDT adjustment valve HP BFPT DET-250A
Eddy Current Sensor PR6424/004-110
Sensor DF310580-90-06-02
Eddy Current Signal Converter CON031/915-100
Blocking Magnet ZYHY, 110VDC
speed sensor tachometer RZQW-03A
LVDT Sensor TDZ-1E-13
LVDT transmitter XCBSQ-01/200-01-22
LVDT Sensor 2000TDGN-15-02
Eddy Current Sensor PR6422/000-010
Temperature switch T768TS040XCNC4 20/95C
oil pressure sensor and gauge B420S
Anti-Corrosion Liquid Level transmitter MIK-P261/400-0651-315
Anti interference LVDT Sensor TD-1K-100-15
electrical proximity sensor CWY-DO-810804-00-05-10-02
DC heating controller DJZ-05
load board FCI2004-A1
LVDT Sensor TH-6N-200-15-01
pt 100 probe WZP-190
Weighing Transducer STC-250
Nemicon encoder OVW2-10-2MHC
lvdt linear 5000TDG-15-01-01 0-250mm
Bolt electric heating rod ZJ-22-15A(R)
Stator Cooling Water System Electric Heater JHG03-LYY6KW380V
pt100 temperature sensor 4 wire WZPM2-08-75-M18-S
Control system LVDT TD2-1
HP DIFFERENTIAL EXPANSION TM0181-A80-B01
industrial pressure switches RC861CZ090HYMD82
sensor CS-3-M10*1-L100
circuit board M83 ME8.530.016
Two-wire LVDT Sensor HDC2-400-01-10
Sensor for measuring H2 purity KQL1500
H2-BF Hydrogen Sensor H2 Sensor Description
Alphasense is expanding its line of electrochemical Toxic Gas Sensors to address industry-specific requirements, including emissions monitoring, process safety, environmental monitoring and VOCs.
Hydrogen (H2)
The Hydrogen sensor has excellent ppm sensitivity for low concentrations to 2,000ppm H2. The very low sensitivity to CO makes this one of the most selective Hydrogen sensors on the market.
As with all Hydrogen sensors, temperature compensation for sensitivity must be applied carefully.
Available in A series.
H2-BF Hydrogen Sensor H2 Sens or Specifications
* Range: 5,000 ppm H2 limit of performance warranty
* Sensitivity: 10 to 25 nA/ppm in 400ppm H2
* Response time t90: < 55s from zero to 400ppm H2
* Resolution: < 0.8 RMS noise (ppm equivalent)
* Temperature range: -30 to 50 deg C
* Pressure range: 80 to 120 kPa
* Humidity range: 15 to 90 % rh
* Weight: < 13g
BENEFITS
Small Size with Low Profile (20x20 x3.0mm)
Long Life (10 years expected life)
Fast Response (< 15 seconds)
Low Power Consumption
Individually Calibrated (NIST Traceable)
ROHS Compliant
APPLICATIONS
Fixed Industrial Safety Monitoring
Portable Industrial Safety Detection
Portable Personal Safety Monitor
Indoor Air Quality Monitoring
Outdoor Air Quality Monitoring
Bad Breath/Halitosis Respiration Sensing
DESCRIPTION
SPEC's printed sensors offer the performance of the best quality electrochemical sensors at a fraction of the price. SPEC's printed sensors are also ultra-thin, offering easy integration into wireless, portable, and networked solutions. These sensors are ideal for health, environmental, industrial and residential monitoring, because of their high performance, low cost andll size.
DGS-CO 968-034 Digital CO Sensor Module DESCRIPTION
Easily add Carbon Monoxide sensing to your IoT application with our digital CO sensor module that provides a calibrated and temperature compensated output.
0 to 1000 ppm Carbon Monoxide sensor with digital output
DGS-CO 968-034 Digital CO Sensor Module BENEFITS
* Low Power - 1 mW @ 1 minute sampling
* Fast Response - 15 seconds typical
* Calibrated & Temp. Compensated Output
* Simple Digital UART Interface
* Integrated T & RH Sensors
* Robust 10-year Estimated Lifetime
* ROHS Compliant
* Small form Factor
* UART to USB adapter provided
* Lightweight (< 2 oz.)
DGS-CO 968-034 Digital CO Sensor Module APPLICATIONS
* Life Safety Levels
* Air Quality Levels
DGS-CO 968-034 Digital CO Sensor Module MEASUREMENT PERFORMANCE CHARACTERISTICS
Based on Standard Conditions 25'C, 50% RH and 1 atm
* Measurement Range: 0 to 1000 ppm
* Resolution: 0.1 ppm
* Zero Accuracy:± 1 ppm
* Measurement Accuracy: 15% of reading
* Measurement Repeatability: <± 3% of reading or 2 ppm, whichever is greater
* T90 Response Time (100 ppm step): < 30 seconds (15 seconds typical)
Dgs-so2 968-038 digital so2 sensor module description
Easily add so2 sensing to your iot application with our sulfur dioxide digital gas sensor module that provides a calibrated and temperature compensated output.
0 to 20 ppm so2 sensor with digital output.
Dgs-so2 968-038 digital so2 sensor module benefits
Low power - 1 mw 1 minute sampling
Calibrated & temp. Compensated output
Fast response < 30 seconds
Simple digital uart interface
Integrated t & rh sensors
Robust 10-year estimated lifetime
Rohs compliant
Small form factor
Uart to usb adapter provided
Lightweight (< 2 oz.)
Dgs-so2 968-038 digital so2 sensor module applications
Air purification control
Air quality monitoring
Industrial safety sensing
Dgs-so2 968-038 digital so2 sensor module measurement performance characteristics
Based on standard conditions 25 âºc, 50% rh and 1 atm
Measurement range: 0 to 20 ppm
Resolution: 50 ppb
Measurement accuracy: 15% of reading,
, measurement repeatability, : < â± 3% of reading,
T90 response time (100 ppm step), : < 30 seconds,
DGS-Ethanol 968-035 Digital Breath Alcohol Sensor Module DESCRIPTION
Easily add Breath Alcohol sensing to your IoT application with our digital gas sensor module that provides a calibrated and temperature compensated output.
0 to 800 ppm Breath Alcohol sensor with digital output.
DGS-Ethanol 968-035 Digital Breath Alcohol Sensor Module BENEFITS
* Low Power 1 mW @ 1 minute sampling
* Calibrated & Temp. Compensated Output
* Simple Digital UART Interface
* Integrated T & RH Sensors
* Robust 10-year Estimated Lifetime
* ROHS Compliant
* Small form Factor
* UART to USB adapter provided
* Lightweight (< 2 oz.)
H2-AF Hydrogen Sensor H2 Sensor Description
Alphasense is expanding its line of electrochemical Toxic Gas Sensors to address industry-specific requirements, including emissions monitoring, process safety, environmental monitoring and VOCs.
Hydrogen (H2)
The Hydrogen sensor has excellent ppm sensitivity for low concentrations to 2,000ppm H2. The very low sensitivity to CO makes this one of the most selective Hydrogen sensors on the market.
As with all Hydrogen sensors, temperature compensation for sensitivity must be applied carefully.
Available in A series.
H2-AF Hydrogen Sensor H2 Sensor Specifications
* Range: 2,000 ppm H2 limit of performance warranty
* Sensitivity: 10 to 25 nA/ppm in 400ppm H2
* Response time t90: < 45s from zero to 400ppm H2
* Resolution: < 0.7 RMS noise (ppm equivalent)
* Temperature range: -30 to 50'C
* Pressure range: 80 to 120 kPa
* Humidity range: 15 to 90 % rh
* Weight: < 6g
CO/H2S-D2 Miniature Size Carbon Monoxide + Hydrogen Sulfide Sensor Introduction
The world wide use of multigas, portable, personal safety monitors has grown since the 1970s to include an ever increasing number of industries. The one requirement in common to the majority of these instruments is the need to measure both Carbon Monoxide and Hydrogen Sulfide simultaneously.
Alphasense now offers a compact, dual gas sensor which allows designers to reduce significantly instrument size and cost. The D2 sensor provides a unique approach to the dual gas sensor in both its size and working electrode configuration. The use of a high capacity filter over the Carbon Monoxide working electrode eliminates Hydrogen Sulfide cross sensitivity to Carbon Monoxide.
Proven in the field over many years, these sensors perform well even under long term, challenging conditions.
H2S-AH Hydrogen Sulfide Sensor (H2S Sensor) Description
Alphasense Hydrogen Sulfide gas sensors operate using well-known fuel cell technology.
H2S-AH Hydrogen Sulfide Sensor size:
20mm diameter, the industry standard size for portable gas detectors
With very high sensitivity and low zero, accurate and stable readings are possible when measuring current concentration ranges from ppb to 1% H2S.
H2S-AH Hydrogen Sulfide Sensor (H2S Sensor) Specification
* Range: 50 ppm H2S limit of performance warranty
* Sensitivity: 950 to 1450â?? nA/ppm in 20ppm H2S
â?¢ Response time t90: < 30 (s) from zero to 20ppm H2S
* Resolution: < 0.03 RMS noise (ppm equivalent)
* Temperature range: -30 to 50'C
* Pressure range: 80 to 120 kPa
* Humidity range: 15 to 90 % rh continuous
* Weight: < 6 g
Matched Transmitter board for H2S-AH H2S Sensor
4-20mA Digital Transmitter Board
* Factory calibration, custom-set for immediate use
* Digital zero, sensitivity and temperature compensation
* Digital and 4-20mA output
* Biased or unbiased operation
* Calibration and range change
BENEFITS
* Small Size with Low Profile (20 x 20 x 3.0mm)
* Long Life (10 years expected life)
* Fast Response (< 15 seconds)
* Low Power Consumption
* Individually Calibrated (NIST Traceable)
* ROHS Compliant
APPLICATIONS
* Fixed Industrial Safety Monitoring
* Portable Industrial Safety Detection
* Portable Personal Safety Monitor
* Indoor Air Quality Monitoring
* Outdoor Air Quality Monitoring
* Bad Breath/Halitosis Respiration Sensing
DESCRIPTION
SPEC's printed sensors offer the performance of the best quality electrochemical sensors at a fraction of the price. SPEC's printed sensors are also ultra-thin, offering easy integration into wireless, portable, and networked solutions. These sensors are ideal for health, environmental, industrial and residential monitoring, because of their high performance, low cost and small size.
COH-A2 Carbon Monoxide + Hydrogen Sulfide Sensor Introduction
Personal gas safety monitors can be found in almost every industry, with the requirement for multiple gas detection becoming commonplace. Most of these gas detectors measure both Carbon Monoxide and Hydrogen Sulfide.
Alphasense new 2sense H2S+CO gas sensor allows designers to reduce significantly their gas detector size and cost. The patented 2sense uses a new approach to dual gas sensor design.
A larger version of the D2 sensor, which has a proven track record in the field over many years, the 2sense does not compromise performance or long term stability over the standard two-sensor solution when measuring both H2S and CO.
2Sense Dual Gas
Save space and save cost with our 2Sense family of dual gas sensors, in the A-series 20mm size.
With a patented design and best response, these dual sensors offer the required performance with obvious advantages.
CO / H2S the COH-A2 builds on 10 years of experience with our original D2 sensor.
