Asia MIE Villa Elevator
Asia MIE villa elevator is personally designed by the Belt and Road engineering designer.
With a deep understanding of art and life, not only the innovation of space vision, but also the perfection of life experience, each elevator becomes another artwork in your villa, making your villa penetrate the concept of home in the simple sense, comfortable, safe, energy-saving, reliable, and return to the true luxury life.
01.Attendantless Operation:Automatically stop at leveling and open door,and automatically close door with time delay. In addition,manually close door before set-time of close door,automatically store interior floor selection and automatically respond external inturn calling.
02.Attendant Operation:Selection by driver,automatically open door when stop at leveling,and automatically store interior floor selection,automatically respond external in-turn calling,and manually close door.
03.Safety of Colse Door:When colse elevator door,if someone or goods are entered,the action of close door is stopped at once and open door again.
04.Overload Protection:If the load of elevator exceeds rated load,the overload indicating lamp will light and alarm is sounded.The elevator will not be run if the door is not closed.
05.Full Load by Pass:If load of elevator reach rated load,the elevator only responds interior call,and not respond external call from sanei observation elevator manufacturer
06.Function of Energy Saving:If the elevator is not operated,the illumination and fan inside car will be autoomatically turned off.They will be turned on qutomatically at once by instruction at any time.
07.Stop Nearby when Fault Occurs:If the fault occurs when elevator running in midway,the elevator will slowly run to nearest floor,stop at open-door zone and then automatically open car door.
08.Arrival Chime:when the elevator runs before stop at the floor,the clock will be sounded to remind passenger that the elevator will stop at the floor.
09.Emergency IIIumination of Car:If the power of illumination is broken,the emergency lamp inside car will be lighted automatically.
10.Auto Return to Landing:The elevator will automatically return to appointed landing if no internal or external calling signal.(the landing can be discretionarily set)
11.Auto Leveling when Power On:If elevator runs at non-door-zone when power is broken,the elevator will automatically reach the leveling position after power is on again.
12.Over-Speed Protection:When the running speed exceeds rated speed due to fault,the electrical and mechanical protection functions will be started to prevent car running from excess of up and down range.
13.Anti-Mischief Function:If exceeding 3 interior calling inside car when elevator load is below setting value,the system will delete all calling and re-select floor.
14.VIP Service Function:When elevator is at VIP service state,the calling inside car will be executed firstly to ensure quick arrival of passenger inside car.
15.Door Nudging with Buzzer:If the time of open door exceeds setting time,the system will close door compulsively and the close door protection function will be neglected temporally.
16.Internal Communication:If the elevator is in abnormal state,the persons in car,at car roof and bottorm pit can communicate with machine room or control room.
17.Inspection and Diagnosis for Faults:When fault occurs,the system of elevator can automatically diagnose the causation of fault,and store the information into systerm for maintenance personnel call.
18.Repeat Close Door:After executing instruction of closing door,if door lock circuit is not connected within specified time,the elevator will re-open the door and then re-close the door.
19.Parking Function:When service of elevator is stopped,any floor can be selected to park elevator.
20.Function of Auto Start and Stop Elevator:If no operator for elevator,auto start and stop elevator can be set based on requirement.
21.Elimination of Mis-Operation:If passenger select floor in error,the floor can be re-selected after eliminating mis-operation.
22.Setting any Non-Stop Floor:The user can set any temporary non-stop floor based on requirement.
23.Setting any Indicating Character of Floor:The user can set any indicating character of floor based on requirement.
24.Self-Diagnosis Function of Call Button:When the call button in some floor is on for long time,the system will neglect the call request of this floor.
25.Dormancy Function of Floor Display:If no one uses the elevator over setting time,the LCD will enter into dormancy state to raise the service life of LCD.
Goods lifts
The iso-max is a goods only lift with two fixed cabin areas of 1, 00 x 1, 40 m (capacity 300, 500, 750 and 1000 kg) or 1, 275 x 1, 50 m (capacity 750 and 1000 kg) and a variable cabin height from 1, 20 - 2, 00 m.
Lift unit complies to eu-directive for machines and has a eu-declaration of conformity of german t_v hanover / sachsen-anhalt e.V.
Compared to a similar hydraulic freight elevator the iso-max will offer you some significant advantages and savings:
Corrosion-proof
Self-supporting galvanized steel structure
Shaft pit depth 270 mm only
Machine room less lift
Accessible spaces underneath the shaft possible
Easy mounting steel shaft cladding deliverable (no fire protection)
Space saving installation - compact construction
Pre-assembled for easy installation
No brick shaft necessary
Technical information
The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details.
Structure
Steel structure, made of cold rolled galvanized special profiles
Buffer 80/80
Compensation device on suspension ropes
Baffle plater
Cabin
Cant-off system made of galvanized steel, adjustable guide shoes on both sides
Special safety gear (type tested)
Hinged doors
Manual operated hinged doors, made of galvanized steel in accordance to din 18090, production controlled by t_v-authorities
With side frames made of galvanized steel according to drawing
Door locks type-tested by t_v-authorities
Machine room door
Double hinged door with sash lock
With side frames made of galvanized steel according to drawing
Drive unit
Drive unit with standard motor ip 54 disc brake and hand wheel, 3 x 400 v /50 hz
2 chain wheels for chains 5/8" x 3/8" suspension 2:1
Controller
Call and send control with 24 v, safety circuit 230 v
Pre-wired with plugs
Adjustable and time-limited despatch delay device (1-5 s)
Electronic overload contact
Acoustic arrival signal
Position indicator on each entrance
Thermal motor protection as main switch pre-wired on control panel
Machine room light with socket
Goods lifts
ISO-MAX
Capacity: 300 / 500 / 750 / 1000 kg The ISO-MAX is a goods only lift with two fixed cabin areas of 1,00 x 1,40 m (capacity 300, 500, 750 and 1000 kg) or 1,275 x 1,50 m (Capacity 750 and 1000 kg) and a variable cabin height from 1,20 - 2,00 m
Lift unit complies to EU-Directive for machines and has a EU-Declaration of conformity of German T_V Hanover / Sachsen-Anhalt e.V.
Compared to a similar hydraulic freight elevator the ISO-MAX will offer you some significant advantages and savings:
corrosion-proof
self-supporting galvanized steel structure
shaft pit depth 270 mm only
machine room less lift
accessible spaces underneath the shaft possible
easy mounting steel shaft cladding deliverable (no fire protection)
space saving installation - compact construction
pre-assembled for easy installation
no brick shaft necessary
Technical information
The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details.
Structure
Steel structure, made of cold rolled galvanized special profiles
Buffer 80/80
Compensation device on suspension ropes
Baffle plater
Cabin
Cant-off system made of galvanized steel, adjustable guide shoes on both sides
Special safety gear (type tested)
Hinged doors
manual operated hinged doors, made of galvanized steel in accordance to DIN 18090, production controlled by T_V-authorities
with side frames made of galvanized steel according to drawing
door locks type-tested by T_V-authorities
Machine room door
double hinged door with sash lock
with side frames made of galvanized steel according to drawing
Drive unit
Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V /50 Hz
2 chain wheels for chains 5/8" x 3/8" suspension 2:1
Controller
call and send control with 24 V, safety circuit 230 V
pre-wired with plugs
adjustable and time-limited despatch delay device (1-5 s)
electronic overload contact
acoustic arrival signal
position indicator on each entrance
thermal motor protection as main switch pre-wired on control panel
machine room light with socket
ISO-PM 1000
Capacity: 1000 kg
Goods lift along directive 95/28/EG with max. 2 persons
corrosion-proof
self-supporting galvanized steel structure
shaft pit depth 270 mm only
cabin push button with send control - landing push buttons with call and send control
machine room less lift
accessible spaces underneath the shaft possible
easy mounting steel shaft cladding deliverable (no fire protection)
reducing of interference prone by setting a safety feature instead of cabin door
space saving installation - compact construction
pre-assembled for easy installation
no brick shaft necessary
Technical information
The information given below lists main features of our goods lifts. Please do not hesitate to contact us for further details.
Structure
Steel structure, made of cold rolled galvanized special profiles
Buffet 80/80
Compensation device on suspension ropes
Baffle plater
Cabin
Cant-off system made of galvanized steel, adjustable guide shoes on both sides
safety light curtain
cabin light - cabin ventilation
type tested safety gear
special pushbuttons in cabin - emergency call - emergency light - prepared for outgoing emergency call
special safety gear (type tested)
special cabin apron (type tested)
Hinged doors
manual operated hinged doors, made of galvanized steel in accordance to DIN 18090, production controlled by T_V-authorities
with side frames made of galvanized steel according to drawing
door locks type-tested by T_V-authorities
Maintenance room door
hinged door with sash lock
with side frames made of galvanized steel
Drive unit
Drive unit with standard motor IP 54 disc brake and hand wheel, 3 x 400 V / 50 Hz
2 chain wheels for chains 5/8" x 3/8" suspension 2:1
Controller
Call and send control
Cabin push button with send control
Landing push buttons with call and send control
Micro-processor technique in controller cabinet
Selector with absolute encoder
GBCCUM21PF145J
DEFINITE TIME REVERSE POWER RELAY
Technical specification
Relay model no CCUM21PF145J
Relay type CCUM 21
Case size 1.5D S/E
V.T.Secondary voltage 110 V ac
Frequency 50 Hz
Current 1 amps
Torque angle(M.T.A) 30 Degree
Aux.voltage 110 V ac
Contacts 2 N/O S/R
Flag Yes
Timing range 2.5 to 25 Secs
Name plate VTT RZF9151 601
Name plate RFH9072 604
Outline drawing MFJ 013
Wiring diagram MPDZ 609 - 02-1
GBCCUM21PF146J
DEFINITE TIME REVERSE POWER RELAY
Technical specification
Relay model no CCUM21PF146J
Relay type CCUM 21
Case size 1.5D S/E
V.T.Secondary voltage 110 V ac
Frequency 50 Hz
Current 1 amps
Torque angle(M.T.A) 30 Degree
Aux.voltage 220 / 250 V ac
Contacts 1 N/O 1 N/C S/R
Flag Yes
Timing range 0.5 to 5 Secs
Name plate VTT RZF9151 601
Name plate RFH9072 604
Outline drawing MFJ 013
Wiring diagram MPDZ 609 - 02-2
GBCCUM21PF154J
DEFINITE TIME REVERSE POWER RELAY
Technical specification
Relay model no CCUM21PF154J
Relay type CCUM 21
Case size 1.5D S/E
V.T.Secondary voltage 110 V ac
Frequency 50 Hz
Current 1 amps
Torque angle(M.T.A) 30 Degree
Aux.voltage 110 V ac
Contacts 2 N/O S/R
Flag Yes
Timing range 0.5 to 5 Secs
Name plate VTT RZF9151 601
Name plate RFH9072 604
Outline drawing MFJ 013
Wiring diagram MPDZ 609 - 02-1
Roller Conveyor Shot Blasting Machine for Bright Bars
Product Details:
Product Type Other
Technology Other
Power Source Electricity
Operating Type Automatic
Power 420 Volt (v)
Pressure 6-7 Bar
Surface Treatment Painted
Supply Ability : 1 Unit Per Month
Price And Quantity
Price Range 100000.00 - 300000.00 INR/Unit
Minimum Order Quantity 1 Unit
Product Specifications:
Product Type Other
Warranty All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions.
Power Source Electricity
Operating Type Automatic
Usage/Applications Casting, Forging, Sheet Metal
Pressure 6-7 Bar
Power 420 Volt (v)
Color Dark Blue
Surface Treatment Painted
Technology Other
Product Description:
TheTunnel type/ roller conveyor shot blasting machine is best suitable for the shotblasting of Round steel Pipes..etc. It consists of inlet and outlet side Rollerconveyors as material handling systems. The components to be blasted are placedon inlet side of the roller conveyor, from where it travels forward and entersinto the inlet tunnel. After passing through the inlet tunnel components entersinto the blast zone which consists of 4 no�?�¢�?â?¬�?â?¢s of Blast Wheels. All these Blast wheel units are strategically placedaround the Blast cabinet. The arrangement of the blast wheel ensures optimum blastcleaning and maximum utilization of the abrasive energy. Blast wheels fires the abrasive at high velocity onthe forward moving components & blast cleans them thoroughly. Blastedmaterial moves forward and enters into the outlet tunnel. The spent abrasivefrom blasting operation after passing through the perforated floor plates willget collected into the cabinet�?�¢�?â?¬�?â?¢s bottom storage hopper. From where it istransferred to the bucket elevator, which elevate the abrasivevertically and discharges the same into a media separation unit where dust andfine abrasives are cleaned ensuring that only clean abrasive will re-circulateto the blast wheel units for effective and better cleaning. A Dust collectionsystem is provided with the machine which will continuously remove the dust andfine particles, thus keeping the inside of the machineand the nearby environment dust & pollution free.
Product Type Other
Technology Other
Power Source Electricity
Operating Type Automatic
Power 420 Volt (v)
Pressure 6-7 Bar
Surface Treatment Painted
Supply Ability : 7-10 Unit Per Month
Product Specifications:
Operating Type Automatic
Technology Other
Product Type Other
Color Dark Blue
Pressure 6-7 Bar
Usage/Applications Casting, Forging, Sheet Metal
Surface Treatment Painted
Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions.
Power Source Electricity
Power 420 Volt (v)
Product Description:
It consists of inlet and outlet side Rollerconveyors as material handling systems. The components to be blasted are placedon inlet side of the roller conveyor, from where it travels forward and entersinto the inlet tunnel. After passing through the inlet tunnel components entersinto the blast zone which consists of 4 nos of Blast Wheels. All these Blast wheel units are strategically placedaround the Blast cabinet. The arrangement of the blast wheel ensures optimum blastcleaning and maximum utilization of the abrasive energy.Blast wheels fires the abrasive at high velocity onthe forward moving components & blast cleans them thoroughly. Blastedmaterial moves forward and enters into the outlet tunnel. The spent abrasivefrom blasting operation after passing through the perforated floor plates willget collected into the cabinets bottom storage hopper. From where it istransferred to the bucket elevator, which elevate the abrasivevertically and discharges the same into a media separation unit where dust andfine abrasives are cleaned ensuring that only clean abrasive will re-circulateto the blast wheel units for effective and better cleaning. A Dust collectionsystem is provided with the machine which will continuously remove the dust andfine particles, thus keeping the inside of the machineand the nearby environment dust & pollution free.
Product Type Other
Technology Other
Power Source Electricity
Operating Type Automatic
Power 420 Volt (v)
Pressure 6-7 Bar
Surface Treatment Painted
Supply Ability : 7-10 Unit Per Month
Price And Quantity:
Price Range 1200000.00 - 1500000.00 INR/Unit
Minimum Order Quantity 1 Unit
Product Specifications:
Color Dark Blue
Product Type Other
Pressure 6-7 Bar
Power 420 Volt (v)
Power Source Electricity
Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions.
Technology Other
Usage/Applications Casting, Forging, Sheet Metal
Operating Type Automatic
Surface Treatment Painted
Product Description:
It consists of inlet and outlet side Rollerconveyors as material handling systems. The components to be blasted are placedon inlet side of the roller conveyor, from where it travels forward and entersinto the inlet tunnel. After passing through the inlet tunnel components entersinto the blast zone which consists of 4 nos of Blast Wheels. All these Blast wheel units are strategically placedaround the Blast cabinet. The arrangement of the blast wheel ensures optimum blastcleaning and maximum utilization of the abrasive energy. Blast wheels fires the abrasive at high velocity onthe forward moving components & blast cleans them thoroughly. Blastedmaterial moves forward and enters into the outlet tunnel. The spent abrasivefrom blasting operation after passing through the perforated floor plates willget collected into the cabinets bottom storage hopper. From where it istransferred to the bucket elevator, which elevate the abrasivevertically and discharges the same into a media separation unit where dust andfine abrasives are cleaned ensuring that only clean abrasive will re-circulateto the blast wheel units for effective and better cleaning. A Dust collectionsystem is provided with the machine which will continuously remove the dust andfine particles, thus keeping the inside of the machineand the nearby environment dust & pollution free.
Product Details:
Product Type Other
Technology Other
Power Source Electricity
Operating Type Automatic
Power 420 Volt (v)
Pressure 6-7 Bar
Surface Treatment Painted
Supply Ability : 7-10 Unit Per Month
Price And Quantity:
Minimum Order Quantity 1 Unit
Price Range 2500000.00 - 3000000.00 INR/Number
Product Specifications:
Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions.
Product Type Other
Power Source Electricity
Power 420 Volt (v)
Usage/Applications Casting, Forging, Sheet metal etc
Color Dark Blue
Technology Other
Operating Type Automatic
Surface Treatment Painted
Pressure 6-7 Bar
Product Description:
The Tunnel type/ roller conveyor shot blasting machine is best suitable for the shot blasting of I/H-Beam /Structural Steel Components etc.
It consists of inlet and outlet side Roller conveyors as material handling systems. The components to be blasted are placed on inlet side of the roller conveyor, from where it travels forward and enters into the inlet tunnel. After passing through the inlet tunnel components enters into the blast zone which consists of 4 nos. of Blast Wheels. All these Blast wheel units are strategically placed around the Blast cabinet. The arrangement of the blast wheel ensures optimum blast cleaning and maximum utilization of the abrasive energy. Blast wheels fires the abrasive at high velocity onthe forward moving components & blast cleans them thoroughly. Blasted material moves forward and enters into the outlet tunnel.
The spent abrasive from blasting operation after passing through the perforated floor plates will get collected in to the cabinet's bottom storage hopper. From where it is transferred to the bucket elevator, which elevate the abrasive vertically and discharges the same into a media separation unit where dust and fine abrasives are cleaned ensuring that only clean abrasive will re-circulate to the blast wheel units for effective and better cleaning. A Dust collection system is provided with the machine which will continuously remove the dust and fine particles, thus keeping the inside of the machine and the nearby environment dust & pollution free.
Product Details:
Product Type Other
Technology Other
Power Source Electricity
Operating Type Automatic
Power 420 Volt (v)
Pressure 6-7 Bar
Surface Treatment Painted
Supply Ability : 7-10 Unit Per Month
Price And Quantity:
Minimum Order Quantity 1 Unit
Price Range 2000000.00 - 2500000.00 INR/Number
Product Specifications:
Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions.
Pressure 6-7 Bar
Weight (kg) 3.5-4 Metric Ton
Color Dark Blue
Product Type Other
Power 420 Volt (v)
Usage/Applications Casting, Forging, Sheet metal etc
Operating Type Automatic
Surface Treatment Painted
Technology Other
Power Source Electricity
Product Description
It consists of inlet and outlet side Roller conveyors as material handling systems. The components to be blasted are placed on inlet side of the roller conveyor, from where it travels forward and enters into the inlet tunnel. After passing through the inlet tunnel components enters into the blast zone which consists of 4 no's of Blast Wheels. All these Blast wheel units are strategically placed around the Blast cabinet. The arrangement of the blast wheel ensures optimum blast cleaning and maximum utilization of the abrasive energy. Blast wheels fires the abrasive at high velocity on the forward moving components & blast cleans them thoroughly. Blasted material moves forward and enters into the outlet tunnel.
The spent abrasive from blasting operation after passing through the perforated floor plates will get collected in to the cabinet's bottom storage hopper. From where it is transferred to the bucket elevator, which elevate the abrasive vertically and discharges the same into a media separation unit where dust and fine abrasives are cleaned ensuring that only clean abrasive will re-circulate to the blast wheel units for effective and better cleaning. A Dust collection system is provided with the machine which will continuously remove the dust and fine particles, thus keeping the inside of the machine and the near by environment dust & pollution free.
Product Type Other
Technology Other
Power Source Electricity
Operating Type Automatic
Power 420 Volt (v)
Pressure 6-7 Bar
Surface Treatment Painted
Supply Ability : 7-10 Unit Per Month
Price And Quantity:
Minimum Order Quantity 1 Unit
Price Range 1200000.00 - 1500000.00 INR/Unit
Product Specifications:
Power Source Electricity
Surface Treatment Painted
Product Type Other
Technology Other
Power 420 Volt (v)
Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions.
Pressure 6-7 Bar
Color Dark Blue
Usage/Applications Casting, Forging, Sheet Metal
Operating Type Automatic
Product Description:
The diabola conveyor shotblasting machine is best suitable for the shot blasting of round BARS. Itconsists of inlet and outlet side diabola conveyors as material handling systems. The components to be blasted are placed on inlet side of the rollerconveyor, from where it travels forward and enters into the inlet tunnel. Afterpassing through the inlet tunnel components enters into the blast zone which consists of 1 no. of Blast Wheel. This Blast wheel unit is strategicallyplaced around the Blast cabinet. The arrangement of the blast wheel ensures optimum blast cleaning and maximum utilization of the abrasive energy. Blast wheels fires the abrasive at high velocity onthe forward moving & rotating components & blast cleans them thoroughly. Blasted material moves forward and enters into the outlet tunnel.
The spent abrasive from blasting operation after passing through the perforated floor plates will get collected into thecabinet's bottom storage hopper. From where it is transferred to the buck etelevator, which elevate the abrasive vertically and discharges the same into a media separation unit where dust and fine abrasives are cleaned ensuring that onlyclean abrasive will re-circulate to the blast wheel units for effective and better cleaning. A Dust collection system is provided with the machine whichwill continuously remove the dust and fine particles, thus keeping the inside of the machine and the nearby environment dust & pollution free.
Are you in search of premium spices to elevate your culinary experience? Look no further! Reesha, your gateway to the finest spices in Dubai, is here to cater to your every spice need. We connect you with the top spice traders in the city, ensuring that your dishes are seasoned to perfection.
Why Choose Reesha?
Exquisite Selection: Reesha collaborates with a curated list of the best spice trading companies in Dubai. We bring you an extensive range of high-quality spices sourced from around the world.
Uncompromising Quality: We understand that quality is paramount when it comes to spices. Rest assured, Reesha's partners maintain stringent quality standards to deliver only the finest spices.
Convenience: Our user-friendly platform allows you to browse and order your favorite spices from the comfort of your home. No more hassles of visiting multiple shops; Reesha brings the market to you.
Expertise: With years of experience in the industry, our partner spice traders possess extensive knowledge about the origins, flavors, and uses of each spice. We are more than happy to assist you in making the right choices for your culinary creations.
Our Spice Categories:
Exotic Herbs: Discover rare herbs that add depth and flavor to your dishes.
Aromatic Spices: Elevate your cuisine with the enticing aroma of our premium spices.
Ethnic Flavors: Explore spices from around the world to create authentic international dishes.
Organic and Sustainable Options: For those who prefer eco-friendly and health-conscious choices.
How to Order:
Reesha is your one-stop destination for all your spice needs. Don't settle for mediocre spices when you can indulge in the best. Join us in exploring the world of flavors and making your culinary creations truly exceptional.
Note: We prioritize customer satisfaction and confidentiality. All transactions and personal information are securely handled.
Discover the essence of culinary excellence with Reesha Dubai's premier spice trading platform!
Exploring the Excellence of Pakistani White Rice: Your Go-To Supplier in African Countries
Are you in search of premium Pakistani White Rice to enhance your culinary offerings? Look no further! Reesha General Trading stands as your trusted partner, providing top-quality rice to meet your needs. With our extensive range and unwavering commitment to excellence, we cater to businesses across African countries, ensuring that you always have access to the finest Pakistani rice.
Why Reesha General Trading?
As a leading supplier, wholesaler, and trader of Pakistani White Rice, Reesha General Trading distinguishes itself through:
Reliable Supply Chain: Our extensive network ensures a steady supply of premium Pakistani rice to African countries, meeting your demands consistently and efficiently.
Quality Assurance: We adhere to strict quality standards, conducting thorough inspections to guarantee the freshness, purity, and authenticity of our rice products.
Customized Solutions: Whether you require bulk orders, tailored packaging, or specific varieties of Pakistani rice, we offer personalized solutions to accommodate your unique requirements.
Our Range of Services:
Wholesale Supply: We cater to businesses of all sizes, offering wholesale quantities of Pakistani White Rice to meet your commercial needs.
B2B Collaboration: Strengthen your supply chain with our B2B partnership opportunities, ensuring seamless transactions and mutual growth.
Delivery Across African Countries: With our efficient logistics capabilities, we deliver Pakistani White Rice to various regions in Africa, including West Africa, ensuring timely and reliable service.
Contact Us Today!
Experience the excellence of Pakistani White Rice with Reesha General Trading. Whether you're a restaurant owner, retailer, or distributor, we're here to support your culinary endeavors with premium quality rice and unparalleled service. Reach out to us today to explore our offerings and elevate your culinary creations with the best Pakistani rice in town!
Overspeed Governor SN-SG-XS240
Lift Parts Speed Governor, Emergency Level Device, Maintenance Box, Elevator Parts Safety Gear, Buffer manufacturer
Name:One Way Lift Governor
Type:SN-SG-XS240
Rated Speed:V=0.25-2.5m/s
Sheave Diameter:Ф240mm
Rope Tension Force:500~1600N
This governor is for machine room,with the anti-slip function when door opens on leveing, to stop moving down of cabin, improve the safety of lift.
As an elevator accessories supplier, Sunny can provide lift parts speed governor, emergency level device, maintenance box, elevator parts safety gear and buffer.
Rated speed: V=0.25~2.5 m/s
Rope wheel diameter:240 mm
Speed limit wire rope:6mm
Available In Both Regular & Plus Sizing, The Ideal V-Neck Short Sleeve Active Top for Yoga, Exercise, Fitness, Gym, Running, Any Type Of Workout Or Everyday Casual Use.
Providing four-way stretch, Dry-Fit sweat wicking fabric with bound edges and interlock seams, you wonâ??t experience any chafing or rubbing.
Banded V Neckline And Tag-Free Neck Label Offers You Maximum Comfort.
Flex Fabric Fits Any Cup Size & Straight Hem Designed For Tucked in or Un-tucked Look.
Pair perfectly with your pants, leggings, shorts, shirts for a cool everyday look, make you more beautiful, sexy and elegant.
VICKY GROUP OF INDUSTRY - PRICE DETAIL'S
LADIES T-SHIRT
ITEM CODE DECRIPTION PRICE (USD)
VGI-33-01 Pink Ladies T-Shirt with printing $5.0
VGI-33-02 Light grey Ladies T-Shirt with printing $5.0
VGI-33-03 Blue V-Neck Ladies T-Shirt with printing $7.0
VGI-33-04 Black V-Neck Ladies T-Shirt with printing $7.0
Important Note:
All The Items, & Fabrics are Customizable on Demand.
Shipping will be added according to your quantity.
Vicky Best Basic Uniforms made in Pakistan , the country from which Taekwondo has originated / Basic uniforms are high quality Poomsae and Demonstration uniforms worn by Taekwondo Demonstration Teams in the World (Current) official uniform form WT Demonstration Team.
Redesigned to fit the size size of your uniform based on your height(Global size fit) Redesigned BS4.5 uniform based on the opinions of People from all around the world - Adjusted sleeve length (about + 2cm) compared to current BS5 uniform, Details upgraded to make it easier to wear and take off (Neck length, side trim, etc) / Upgraded detailed points to wear the uniform easily such as neck length, vent etc.
Developed through 'Analyzing the relationship between fabric and sound' with a strong sound in the uniform during the martial arts operation (Research title: Experiment Analysis of Measuring Frictional Sound of Taekwondo Suits).
DMC Pattern technology has been applied to BS4.5 uniforms in order to do various performance of Martial Arts (Such as kicking, Blocking, and so on ) conveniently.
Color: White with BK Neck / Materia: Polyester 45%, Cotton 55% / Content: Top(V nest type) + Pants, The belt is not included.
VICKY GROUP OF INDUSTRY - PRICE DETAIL'S.
ITEM CODE DECRIPTION PRICE (USD)
VGI-29-01 Taekwondo Suit, Medium Weight 45% Polyester & 55% Cotton $35.00
VGI-29-02 Taekwondo Suit, Medium Weight 45% Polyester & 55% Cotton $35.00
VGI-29-03 Taekwondo Suit, Medium Weight 45% Polyester & 55% Cotton $35.00
VGI-29-04 Taekwondo Suit, Medium Weight 45% Polyester & 55% Cotton $35.00
Important Note:
All The Items, & Fabrics are Customizable on Demand.
Shipping will be added according to your quantity.
Salient Features
Special linear weigher control with load cell & stepper motors
Operator friendly PLC controller with a user friendly GUI
Pouch style options Center seal pouch with increased panel area
Advanced Constant Heat sealing System
Specially designed film roll unwinding mechanism for smooth bag pulling
Operation with brake system.
Independent drives for sealing ,Feeding & film feed operations for optimum performance
Less floor space requirement for machine installation.
Equipped with variable speed drive for flexibility to offer adjustable output for the machine
Bag Unwinding by Lanatex belt drive through servo motors and control cards
Flexible vertical seal jaw positioning to offer range of variable pack with offering
Quick change-over facility
Suitable for different range of packaging film i.e PE film with or with out Laminate
Special safety card to control current for protection electrical / electronics equipment
Adjustable bag length by PLC controlled via servo motors and control cards
Linear weighing system for accurate dosing
Independent temperature controller for both seal
Jaw's security devise to protect the operator of the machine
Electric Panel IP-54 Protection Standard
Machine Packaging Capabilities
Potato Chips, Snacks, Rice, Macaroni, Beans, Pasta, Dry Fruits, Pasta, Vermicelli, Candies & Confectionery products as well as all kinds of lightweight products.
Technical Specifications
Output Quantity: 50 g 2000 g
Output: 20-55 bags/min
Filler Accuracy: ± 5 gm
Pack / Quantity Range:
Min. Bag size (W x L) approx: 120 mm x 150 mm
Max. Bag size (W x L) approx: 355 mm x 500 mm
Packaging Material: Co-extruded 3 or 5 Layer PE Based or Laminated, Metalize, Aluminum Foil 60 to 140 microns
Film Reel: Core dia 76 mm & Reel diameter 300 mm max
Electrical Requirement:
Input Supply: 380 V AC, 50 Hz, 3 ph + N + G
Connected Load: 5.5 KVA
Peak Power Rating: 5 KW
Air Requirement:
Air Pressure: 6 bar constant dry air
Air consumption: 800 Ltr/min
Machine Dimensions along with conveyor (W x D x H) approx.: 1110 mm x 1700 mm 2400 mm (1300 mm x 1956 mm x 3350 mm) for 5kg
Weight: 600 kgs (Net)
Optional Accessories
Customised pack Size
Photo mark Registration Unit for Panel Printed Films
Automatic Pouch Counting System
Inert Gas Flushing System
Product discharge conveyor
Date Coding System
Extra Pneumatic Magazine Shaft
Optional Film End Sensor
UV Sterilisation of packaging film
Special impulse sealing jaw
Bucket elevator â?¢ Platform
English Folding System
Extra Conformer for different sizes
Air release system
Linear weigher
502 Transaction Elevator Mie V 02 Suppliers
Short on time? Let Transaction Elevator Mie V 02 sellers contact you.
