Toshiba Cv-6ha , Contactor Magnetic, Ctry.mfg Toshiba Part Cv-6ha, 100-110 V Ac/dc, 50/60 Hz, 7.2 Kv, 6.6-3.3 Kv Operational Voltage, 400a, Draw-out Type, Vacuum Contactor With Clf Fuse.
The Toshiba HCV-6KAU and HCV-6KALU
vacuum contactors described in this manual are
suitable for use on systems of 7.2kV 720A
7.2kA.
Arc interruption is accomplished inside sealed vacuum interrupters mounted on track-resistant insulators. Vacuum interrupters use low-surge contact materials, which exhibit low current chopping levels reducing switching over-voltage.
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
Steel products refer to solid straight steel products with a certain section shape and size, including wire, profile and plate, which are formed by plastic processing except pipes. It can be divided into hot rolling, cold bending, cold rolling, cold drawing, extrusion, forging, hot bending, welding and special rolling according to the production method. It can be divided into railway, shipbuilding, mining, structure and construction according to its use. According to the material can be divided into carbon steel, alloy steel and stainless steel. At the same time, these steel products can be reprocessed to form semi-finished products or finished products to meet special requirements. We can according to the customer's different needs, according to the drawings or samples for reprocessing production.
2185 Toshiba Part Cv 6Ha Contactor Magnetic Suppliers
Short on time? Let Toshiba Part Cv 6Ha Contactor Magnetic sellers contact you.
Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings.
According to the application:
1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc.
2. changing the direction of the pipe: bends, bends.
3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe.
4. pipe fittings with additional piping branches: three links, four links.
5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug.
6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc.
According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings
According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings.
Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.
Stainless steel tube is a hollow long strip steel made of stainless-steel material. Because of its excellent corrosion resistance, it is mainly widely used in petroleum, chemical, medical, food, light industry, mechanical instruments and other industrial transportation pipelines and mechanical structural components. In addition, when the bending and torsion strength are the same, the weight is light, so it is also widely used in manufacturing mechanical parts and engineering structures, but also commonly used in the field of furniture decoration.
Stainless steel pipe is divided into seamless pipe and welding pipe according to the production mode, seamless steel pipe can be divided into hot rolling pipe, cold rolling pipe, cold pulling pipe and extrusion pipe, etc., cold pulling and cold rolling is the secondary processing of steel pipe; welding pipe is divided into straight welding pipe and spiral welding pipe.
Stainless steel pipes can be divided into round tubes and different tubes according to the cross-sectional shape. The form tubes have rectangular tubes, rhomboid tubes, ellipse tubes, hexagonal tubes, octagonal tubes and various cross-sectional asymmetric tubes.
It can be divided into Austenitic Stainless Steel Tube Ferritic Stainless Steel Tube Martensitic Stainless Steel Tube and Duplex Stainless Steel Tube by the type of stainless steel.
Fasteners are the general term of the class of mechanical parts used in fastening two or more parts (or components) into a whole. It is widely used in energy, electronics, electrical appliances, machinery, chemical, metallurgy, mold, hydraulic and other industries, at the same time, in various kinds of machinery, equipment, vehicles, ships, railway, bridge, construction, structure, tools, instruments, chemical, instruments and supplies, you can see all kinds of fasteners, is the most widely used mechanical foundation parts. It is characterized by a wide variety of variety specifications, different performance uses, and a very high degree of standardization, series, and generalization. Therefore, a class of fasteners that already have national standards is called standard fasteners, or simply standard ones.
Circular steel pipe is both openings and have hollow concentric sections of steel larger than the surrounding. The specifications of steel pipes are indicated by appearance dimensions and inner diameter and wall thickness, with a wide range of dimensions from very small diameter capillary to large round steel pipe of several meters in diameter. Round steel pipes can be used for pipelines, thermal equipment, machinery industry, petroleum geological drilling, containers, chemical industry, and special uses. It can be divided into seamless, ERW, LSAW, SSAW steel pipe according to the production process.
Hollow Section steel Tube is the general name for the steel pipe other than thecircular steel pipe. Such as square, rectangle, oval,elliptical, cone, trapezoidal, spiral, etc. Different steel pipe can more adapt to the particularity of use conditions, save metal and improve the labor productivity of parts manufacturing. It is widely used in aviation, automobile, shipbuilding, mining machinery, agricultural machinery, construction, light textile and boiler manufacturing. The methods of producing different pipes are cold pulling, electric welding, extrusion and hot rolling, etc. Compared with the round tube, the different tubes generally have a larger moment of inertia and cross section modulus, and have a large bending resistance and torsion resistance, which can greatly reduce the structural weight and save steel.
Icumsa : 45 Rbu Icumsa
Ash Content : 0.04% Maximum By Weight
Moisture : 0.04% Maximum By Weight
Magnetic Particles : Mg/kg 4
Solubility : 100% Dry & Free Flowing
Granulation : Fine Standard
Polarization : 99.80 Minimum
Max As : 1 P.p.m.
Max Os : 2 P.p.m.
Max Cu : 3 P.p.m.
Colour : Sparkling White
Sediments : None
So : Mg/kg 20
Reducing Sugar : 0.010% Maximum In Dry Mass
Radiation : Normal W/o Presence Of Cesium Or Iodine So2: Certified
Substance : Solid, Crystal
Smell : Free Of Any Smell
Hpn Staph Aureus : Per 1 Gram Nil
Microbiological Limits : Pathogenic Bacteria Including Salmonella Per 1 Gram Nil Bacillus Per 1 Gram Nil
Pesticide Traces : Maximum Mg/kg Basis Ddt 0.005 Photoxin 0.01 Hexachloran Gamma Isomer 0.005
Crop: recent Crop Or Proceeding
Phytosanitary Certificate Of No Radiation, No Virus, No Insect Parts, No Rodent Excrement, No Husks And No Poisonous Matter. Product Is Suitable For Human Consumption
430 Annealed Stainless Steel Strip
Extra Bright Annealed Soft Temper 430 Stainless Strip Steel is the most popular of all the straight chrome stainless steels Its principal use is for decorative purposes Because of its excellent heat and corrosion resistant properties its ductility and because it costs less than the chromenickel grades this Type 430 Stainless Steel Strip is used in countless applications These uses are primarily for stainless and decorative purposes including household appliances metal molding metal trim cabinet hardware hinges drawn and formed parts and stampings
Type 430 Ferritic Stainless Steel Strip Characterisings
Corrosion and heat resistant
Ductility at about 75 of low carbon strip
Similar to chromium grades with stretcher strains
Roping can result from excessive stretching
Able to weld for nonrigorous service
Magnetic in all conditions
Tensile strength annealed condition minimum of 65000 PSI yield of 30000 PSI elongation at 22
EMSCULPT is the only procedure that can help both women and men burn fat and build muscle. Dr. Busso was part of the BTL Aesthetics EMSCULPT development team and was the first physician in Thailand to offer this exciting new technology to patients.
Particularly effective on the buttocks and abdomen, EMSCULPT uses High-Intensity Focused Electro-Magnetic (HIFEM) field technology to induce short bursts of powerful muscle contractions that lead to increased muscle density, decreased volume, better definition, and improved tone.
Product Specifications :
Max. Power : 200 Watts
Output Frequency : 27.12 MHz
Treatment Duration : 1 to 30 min
Mode : Continuous
Output Power : 0 W - 200 W
Dimensions of Device : 22 in W x 39 in H x 22 in D
Weight of Device : 84 lbs
Graphic Color Touch Screen : 8.4", 640x480 pixels
Dimensions of Applicator without Cable : 27 in W x 7.6 in H x 4.1 in
Weight of Applicator : 3.9 lbs
KEY FEATURES :
Builds muscle
Burns fat
Together!
Non-invasive buttock lifting procedure
No surgery
No anaesthesia
Suitable for everyone
only a 30 minute walk in walk out procedure
Only 4 session needed 2-3 days apart
Feels like an intensive workout
No downtime
Instant results but gets better after two to four weeks
Aluminum Ingot is a piece of relatively pure material, usually metal, that is cast into a shape suitable for further processing. Ingots usually require a second procedure of shaping, such as cold/hot working, cutting, or milling to produce a useful final product. We supply high purity Aluminum Ingots originated from different part of the world. Product Features: Aluminium Ingot - cast alloy, claimed in the creation of shaped castings, and for other purposes. The popularity of this brand is caused by the low cost of the alloy, the possibility of multiple processing, the relative plasticity, strength. Aluminum ingot made of copper, aluminum and silicon. Apply sculpture, engineering, serves to create a cast aluminum cookware. Characterized by high aluminum ingot castability - low-melting, good fluidity, low linear shrinkage.
Commodity aluminum ingot Grade Al99.90 / Al99.85 / Al99.70 / Al99.60 / Al99.50 / Al99.00 / Al99.7E / Al99.6E Appearance silvery white Al (Min) 99%-99.9% weight 20/25kg density 2.7103g/cm3 application Indoor decorations / building material / Furniture / cabinet / Elevator / Car interior decoration / Household appliances / Aerospace and military aspect / aircraft manufacturing / features light weight / good toughness / good anodizing property / Excellent casting performance / Easy to stretch / Non-magnetic and not easy to ignite / Strong ability to reflect visible light / good conductivity of heat and electricity
WHITE REFINED SUGAR- ICUMSA 45 RBU SHALL CONFORM TO THE FOLLOWING SPECIFICATIONS. THE SUGAR BEING SUPPLIED IS 100% FIT FOR HUMAN CONSUMPTION.
SPECIFICATIONS:
ICUMSA : 45 RBU ICUMSA
Attenuation index units Method # 10-1978
ASH CONTENT : 0.04% Maximum by Weight
MOISTURE : 0.04% Maximum by Weight
MAGNETIC PARTICLES : mg/kg 4
SOLUBILITY : 100% DRY & Free Flowing
GRANULATION : Fine Standard
POLARIZATION : 99.80- Minimum
Max AS : 1 P.P.M.
Max OS : 2 P.P.M.
Max CU : 3 P.P.M.
COLOUR : Sparkling White
SEDIMENTS : NONE
SO : mg/kg 20
REDUCING SUGAR : 0.010% Maximum in Dry Mass
RADIATION : Normal w/o presence of cesium or iodine SO2: Certified
SUBSTANCE : Solid, Crystal
SMELL : Free of any Smell
HPN STAPH AUREUS : per 1 gram - NIL
MICROBIOLOGICAL LIMITS : Pathogenic Bacteria including Salmonella per 1 gram - NIL Bacillus per 1 gram - NIL
PESTICIDE TRACES : Maximum mg/kg Basis DDT 0.005 - PHOTOXIN 0.01 - HEXACHLORAN - GAMMA ISOMER 0.005
CROP: :2014 or more recent crop
PHYTOSANITARY CERTIFICATE of no radiation, no virus, no insect parts, no rodent excrement, no husks and no poisonous
White Refined Sugar- Icumsa 45 Rbu Shall CONFORM TO THE FOLLOWING SPECIFICATIONS. THE SUGAR BEING SUPPLIED IS 100% FIT FOR HUMAN CONSUMPTION.
SPECIFICATIONS:
ICUMSA : 45 RBU ICUMSA
Attenuation index units Method # 10-1978
ASH CONTENT : 0.04% Maximum by Weight
MOISTURE : 0.04% Maximum by Weight
MAGNETIC PARTICLES : mg/kg 4
SOLUBILITY : 100% DRY & Free Flowing
GRANULATION : Fine Standard
POLARIZATION : 99.80�?�º Minimum
Max AS : 1 P.P.M.
Max OS : 2 P.P.M.
Max CU : 3 P.P.M.
COLOUR : Sparkling White
SEDIMENTS : NONE
SO : mg/kg 20
REDUCING SUGAR : 0.010% Maximum in Dry Mass
RADIATION : Normal w/o presence of cesium or iodine SO2: Certified
SUBSTANCE : Solid, Crystal
SMELL : Free of any Smell
HPN STAPH AUREUS : per 1 gram �¢?? NIL
MICROBIOLOGICAL LIMITS : Pathogenic Bacteria including Salmonella per 1 gram �¢?? NIL Bacillus per 1 gram �¢?? NIL
PESTICIDE TRACES : Maximum mg/kg Basis DDT 0.005 �¢?? PHOTOXIN 0.01 �¢?? HEXACHLORAN �¢?? GAMMA ISOMER 0.005
CROP: :2014 or more recent crop
PHYTOSANITARY CERTIFICATE of no radiation, no virus, no insect parts, no rodent excrement, no husks and no poisonous
1. GMC electrical magnetic ac contactor is suitable for using in the circuits up to the rated voltage 660V AC 50HZ or 60HZ, rated current up to 95A, for making frequently starting & controlling the AC motor.
2. 09-220A GMC AC Contactor can be Combined with the auxiliary contact block, thermal relay & machine-interlocking device etc, it becomes the delay contactor, mechanical interlocking contactor, star-delta starter.
3. With the thermal relay, it is combined into the electromagnetic starter.
The Variable Speed Drive FRENIC series is equipped with functions and performance to meet all types of requirements, and in addition it is easily maintained and environmentally friendly. The series lineup ranges from simple to advanced-function models, enabling model choices matching situations for use. Fuji Electric provide Variable Speed Drives perfect for automating and with energy saving devices like a fan pump or carrier and variable speeds.
2185 Toshiba Part Cv 6Ha Contactor Magnetic Suppliers
Short on time? Let Toshiba Part Cv 6Ha Contactor Magnetic sellers contact you.
