It is used to measure the plastic deformation capacity and surface and internal defects during unidirectional or bidirectional torsion which the metal wires with diameters of 10 mm~30 mm.
1.Introduction and application-torsion testing machine
it is applicable to static mechanical properties test for metallic, nonmetallic materials and various construction member, like transmission shaft and semi-axis;
adopting horizontal structure, computer screen display, digital data acquisition and control system as well as fully digital ac servo system;
adopting planetary cycloid pinwheel speed reducer to drive, with features of even loading, stability, without impact, accurate data acquisition.
if equipped with special grips, it can perform torsional force, torsional angle, and angle stiffness for metals and rubber cohesive layers.
parameters modulus g, proof strength, non-proportional torsionp, upper yield strengtheh, lower yield strengthïel, torsional strengthm, etc can be measured and calculted on software automatically.
2. Main technical parameters- torsion testing machine
1Max torque500nm
2Measuring range of torque10nm-500nm
3Torque resolution1/±200000
4Relative error of indicating value of torque1%
5Torsion angle resolution0.01°
6Torsion speed0-360°/min
7Relative error of torsion speedWithin ±1% of set value
8Max distance between grips600mm
9Axiality of two gripsLess than ï1.0mm
10Central height of main axis170mm
11Power0.75kw
12Voltage220v±10% 50hz
13Dimension1750x600x950mm
JR-N wire winding and torsion testing machine is a testing machine used to test the toughness and adhesion performance of overhead stranded wire frame and (or) reinforced galvanized steel wire, which meets the requirements of GB/T3428-2002 Galvanized Steel Wire for Overhead Stranded Wire: Winding and Torsion Test.
1.Introduction and application-torsion testing machine
it is applicable to static mechanical properties test for metallic, nonmetallic materials and various construction member, like transmission shaft and semi-axis;
adopting horizontal structure, computer screen display, digital data acquisition and control system as well as fully digital ac servo system;
adopting planetary cycloid pinwheel speed reducer to drive, with features of even loading, stability, without impact, accurate data acquisition.
if equipped with special grips, it can perform torsional force, torsional angle, and angle stiffness for metals and rubber cohesive layers.
parameters modulus g, proof strength, non-proportional torsion ïp, upper yield strength ïeh, lower yield strengthïel, torsional strength ïm, etc can be measured and calculted on software automatically.
2. Main technical parameters- torsion testing machine
1Max torqu1000nm
2Measuring range of torqu20nm-1000nm
3Torque resolution1/±200000
4Relative error of indicating value of torqu1%
5Torsion angle resolution0.01°
6Torsion speed0-360°/min
7Relative error of torsion speedWithin ±1% of set value
8Max distance between grips600mm
9Axiality of two gripsLess than ï1.0mm
10Central height of main axis170mm
11Power0.75kw
12Voltag220v±10% 50hz
13Dimension1750x600x950mm
1. Size of concrete specimens for compression strength test
Concrete cubic specimen: 150X150X150mm, 100X100X100mm, 200X200X200mm
Cylindrical concrete specimen: diameter 150X300mm, diameter 100X200mm, diameter 200X400mm
2. Brief introduction of concrete compressive strength test procedure
1) Placing the concrete specimen---place the test specimen on the lower bearing block. Carefully align the axis of the specimen with the center of thrust of the spherically seated block.
2) Apply the load continuously and without shock until the specimen fails and record the maximum load carried by the concrete specimen during the test. Note the type of failure and the appearance of the concrete.
3.Relative test method
GB/T 50081 standard for test method of mechanical properties on ordinary concrete
ASTM C39 standard test method for compressive strength of cylindrical concrete
ASTM E74 practice of calibration of force-measuring instruments for verifying the force indication of testing machine
4. Specifications for concrete compressive strength testing machine
Max. capacity: 3000KN( lower or higher capacity can make to order)
Grade of testing machine: grade 1
Distance between upper and lower compression platen: 320mm
Stroke of piston:50mm
Size of upper and lower compression platen:375X375mm
Weight :about 900kg
1. Introduction and test principle of compression strength measuring
The compression testing machine is to measure compression strength of corrugated boxes in the situation of pressure and protect functions of packages for the objects filled in the packages.
Test principle:
(1) Corrugated boxes compression strength test, loading to the corrugated boxes using a compression testing machine at a certain constant rate untill corrugated boxes are broken or till certain load or displacement are reached.
(2) Corrugated boxes stacking test, loading a certain force to the corrugated box using a compression testing machine untill corrugated box is broken or sustain a certain time period.
When measuring deformation of corrugated box during compression test, an original load should be set as a datum point. The datum point can refer to the following chart:
Average compression force(N)Original force(N)
101-200 10
201-1000 25
1001-2000 100
2001-10000 250
10001-20000 1000
200001-100000 2500
2. Functions of compression testing machine
This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration.
3. Specification of compression testing machine
1 Max. Load 20KN
2 Resolution of test force 1/300000
3 Resolution of displacement 0.001mm
4 Precision of crossbeam displacement 0.5%
5 Precision of deformation 0.5%
6 Measuring range of test force 1%-100%FS
7 Relative error of test force 1%
8 Relative error at zero point 0.5%
9 Speed of crossbeam 0.01-500mm/min
10 Precision of crossbeam speed 1%
11 Speed range of load 0.005%-5%FS/s
12 Precision of load speed When speed is less than 0.05FS/s, precision is within 1% of set value, when speed is more than 0.05FS/S, precision is within 0.5% of set value
13 Speed of deformation 0.005%-5%FS/s
14 Precision of deformation speed When speed is less than 0.05FS/s, precision is within 1% of set value, when speed is more than 0.05FS/S, precision is within 0.5% of set value
15 Stroke of crossbeam 900mm
16 Effective tensile height 650mm
17 Effective test span 400mm
18 Effective compression height 800mm
19 Diameter of compression platen 100mm
20 Voltage and power 220V,50Hz, 700W
21 Dimension of main machine 650X450X1650mm
22 Weight of main machine about 300kg
The AEC1112- Computerized Universal Testing Machine with a maximum load capacity of up to 10, 20, 40, 60, 80, 100 and 200 Ton with the provision of testing various samples of metals and its different alloys for the testing in tensile mode for round and flat specimens as per the national and International standard like ASTM, DIN, ISO, EU and IS standards etc.
capacity of up to 10, 20, 40, 60, 80, 100 and 200 Ton.
3. Applications of testing machine
This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration.
4. Features of testing machine
1) Adopting aluminum alloy cover, with attractive streamline structure
2) Mainly used to test mechanical properties for metal, non-metal and composite materials
3) Adopting precision auto control and data acquisition system to realize fully digital adjustment to data acquisition and control process. During test, it can test max. Bearing tensile force, compression force, tensile strength, deformation, elongation, yield point and other technical specifications
4) After test, the above parameters can be calculated automatically through main controller according to the test parameters, which are set before test and meantime display the corresponding test results. All test parameters can be saved and inquired after test, also can be printed out.
5) With remote control box to realize speed adjustment of crossbeam, flexibly and freely switched
6) With functions of automatic return to original position, intelligently, efficiently, quickly
7) With limit position function of any working position and over voltage, over current protection functions, reliable and safe
8) With many control modes of constant speed control to force, stress, deformation, strain and low cycle and user self-programming control
9) Switch among many test curves: stress-strain curve, load-deformation curve, load-displacement curve, load-time curve, deformation-time curve, displacement-time curve. Partial enlargement, overlap and comparison.
We are the authorized first vendor of ADTech!
KFDA CE approved,
FDA Pending
Price : Negotiable
Pre-Clinical Test Report
Accuracy
- In total samples 93.3% (14/15) - In positive samples 91.7% (11/12)
1. Pre-Clinical Test summary
1) Pre-clinical test is fulfilled by Domestic large clinical laboratory with ADTech COVID-19 IgM/IgG RAPID KIT
2) Tests are made by total 15 samples with 12 positive and 3 negative samples
3) Clinical Laboratory tested the sample with Immunofluorescence Analysis
2. Pre-clinical test result
1) Samples were tested by ADTech COVID-19 IgM/IgG RAPID KIT
2) Test result by ADTechs RAPID KIT
- 4 negatives and 11 positives results in 15 samples
3) Comparison between Immunofluorescence analysis and ADTechs RAPID KIT
- 14 test results are same(including negative and positive results) - 1 samples test result are different(Positive Negative by ADTech
For in vitro qualitative detect of Covid-19 antigen in nasal(NS) swab specimens directly from individuals who are suspected of COVID-19 by their healthcare provider within the first 5 days of the onset of the symptoms. This test is only provided for use by clinical laboratories or to healthcare workers for point-of-care testing, and not for at home testing.
1.Easy to collect samples simple operation without professional equipment.
2.The test results are available in 15 minutes, and the test results are clearly visible. 3.Convenient transportation and low price, higher accuracy.
4.Suitable for large-scale rapid screening.
Shelf life: 24 Months
Test Result time: 10 Mins
Packing: 25 Pieces per Box
Covd-19 IgG/IgM Rapid Test Cassette (Whole Blood/Serum/Plasma) is a solid phase immunochromatographic assay for the rapid, qualitative and dierential detection of IgG and IgM antibodies to 2019 Novel Corona Virus in human whole blood, serum or plasma.
Specification.jpg
Product: Rapid Diagnostic Test Kit
Item: Corona Virus Test Kit
Specimen: Whole Blood/Serum/Plasma
Format: Strip/Cassette
Port of Loading: Shanghai
OEM and ODM: OEM/ODM Welcome
Shipping: By UPS, FEDEX, DHL, TNT, by air or by sea
Note: Store this product in a cool and dry place, avoid direct sunlight, stay away from places that children can contact, and avoid eye contact. If you have allergies to this product, please stop using and consult a doctor.
COVID-19 Corona Virus Rapid Test Kit11.pngCOVID-19 Corona Virus Rapid Test Kit12.png
COVID-19 Rapid Test Kit IgG + IgM (Colloidal Gold) comes in packs of 40 tests and contains:
GCMS manufactures COVID-19 antigen test kit, the GENEDIA W COVID-19 Ag which is listed on the EU common list, also with GMP and ISO certifications. GENEDIA W COVID-19 Ag is unaffected based on the in-silicon analysis of the mutations in the nucleocapsid (N gene) of Omicron viruses. Letter of statement is available upon your request.
To get over COVID-19 pandemic, especially the recent Omicron breakout, currently we are doing big promotions for three kinds of COVID-19 Ag kit. All are in stock and available right away.
1. Nasopharyngeal
2. Nasal
3. Saliva
Price and Minumum Quantity
Price FOB in USD: negotiable 0.8 to 1.8Minimum Order Qty: None Pieces
Production Capacity: 3,000,000/monthPackaging: 20 Tests/kit, 30 Kits/box, 12 Boxes/pallet
Sample: Available. Sample Cost Born By Supplier
Product Model And Origin
Brand: GENEDIAModel: 643G-S (Saliva)
Seller Code: Genedia w covid 19 agHS Code: 3002.15
Standards: Ce
Competitive Advantages
Allow wider testing with fast test time (10 minutes)
All necessary materials provided / no equipment needed
Sensitivity: 93.33%, specificity: 100%
Free sample. no moq. price is negotiable. customized packing.
Other Details
20 tests / kit
24 months from the date of manufacture
2 ~ 30c(35.6 ~ 86f) available for room temperature deliver
In stock. fast delivery.
1 x Instructions for Use Manual
40 x Test Cassettes
1 x Buffer
40 x Dropper
Angiten-COVID-19 Virus Test Kit (Colloidal Gold)
Quantity of box: 25 persons/box
Brand: Easysweet
NMPA (National Medical Products Administration): Approved
CE: with CE mark
BfArM: listed
Test Method: Antigen Test
Result Time: 10-15 mins
Sample Type: Nasal Swab
Sensitivity: 96.70%
Specificity: 100%
Accuracy: 98.94%
Shelf Life: 24 months
Storage Temperature: 2-30 Degree Celsius
Country of Origin: Made in China
Additional Information:
Production Capacity: 1 million
Delivery Time: 10-15 days
Packaging Details: 25 tests in a pack, 40packs/ carton
Angiten-COVID-19 Virus Test Kit is an in vitro diagnostic rapid test for the qualitative detection of SARS-CoV-2 antigen (Ag) in human nasopharyngeal swab specimens from individuals who meet COVID-19clinical and / or epidemiological criteria. It can be used by professional only.
Price and Minumum Quantity
Price FOB in USD: NegotiableMinimum Order Qty: 10000
Production Capacity: 1000000Packaging: 25 Persons/box
Sample: Available. Sample Cost Born By Buyer
Product Model And Origin
Brand: Easysweet
HS Code: 3822009020
Standards: Ce
Competitive Advantages
Best price with shortest delivery time
Best price with shortest delivery time
Best price with shortest delivery time
Best price with shortest delivery time
Other Details
Angiten-covid-19 virus test kit (colloidal gold)
Angiten-covid-19 virus test kit (colloidal gold)
Angiten-covid-19 virus test kit (colloidal gold)
Angiten-covid-19 virus test kit (colloidal gold)
Access Bio Care Start Covid-19 Rapid Antigen Test Kit
Product Details:
Number of Reactions(Preps) per Kit : 1
Brand : Access Bio
Test Method : Antigen Test
Result Time (Rapid Kits) : 10 min
Sample Type ; Nasal Swab
Packaging Size : 20 Test Kits/Box
Packaging Type : Box
The CareStart COVID-19 Antigen test is a lateral flow immunochromatographic assay intended for the qualitative detection of the nucleocapsid protein antigen from SARS-CoV-2 in nasopharyngeal or anterior nasal swab specimens directly collected from individuals who are either suspected of COVID-19 by their healthcare provider within first five days of symptom onset, or from individuals without symptoms or other epidemiological reasons to suspect COVID-19 when tested twice over two or three days with at least 24 hours and no more than 48 hours between
Material: BAMBOO
Product Type: Storage Bamboo Baskets
Regional Feature: Eco-friendly, light weight, easy to use and care
Place of Origin: Vietnam
Product name: Bamboo Basket
Use: Storage for home decor
156700 Torsion Testing Machine Suppliers
Short on time? Let Torsion Testing Machine sellers contact you.
