Grade : Titanium Bar/Rod
Diameter : Dia6.0--400mm Length 4000mm
Grade Gr 1, Gr 2, Gr 3, Gr 4, Gr 5, Gr 7, Gr 9, Gr 12, Gr 23 etc.
Standard: ASTM B348, ASTM F136, ASTM F67 etc.
Type : Ti round bar, Ti square bar, Ti flat bar, Ti hexagonal bar
Application : Industrial, chemical industry, military industry, medical industry etc.
Titanium strength ratio is better than other metals, components with high strength, good rigity, less weight can be made out of titanium.
Corrosion Ressistance
Compared with stainless steel, titanium alloys corrosion is better in moisture laden air, titanium greatly resists spot corrosion, acis corrosion and stress corrosion
High-Temperature Ressistance
Titanium can work in 450-500 for a long time, titanium alloy still prossesses high strength when working in 150-500
Good Thermal Conductivity
Titanium is non-magnetic metal, it can not be magbetized in large magnetic field, also titanium is toxic-free and compatibility with blood, there titanium is allpied in medical field
We have a wide variety stock of rebar, available dimensions from 8 mm to 32 mm,grades 60,40 ASTM A615,and BS4449, lengths 4,5,6,9,and 12 meters,plain,and deformed bars. Material SD390/490/400,B500B/GR460B,HRB400/500,ASTM A615 GR40/60 Standard BS4449,JIS,ASTM/A615 Length 6m,12m Application Widely used in construction industry.
can supply REBARS as per below: -Size: 6mm to 50 mm -Length: 6 meters up to 16 meters -Packing: Once folded bundles available.
hese corrugated steel bars are used as tension devices in the construction of concrete slabs and walls, as well as decorative/ornamental grille work. When used in concrete constructions, these help to strengthen and hold concrete when it is compressed, and come in a wide variety of sizes to fit various building construction needs. At ARC. AVAILABLE IN 3/8 (10mm), 5/8 (16mm), (20mm), (12mm), 1 (25mm) and 1 (32mm)
1.Standard:astm b348
2.Dimension:dia.:0.8-350mm, length:<8000mm,
Or we can produce accoding to your requirement
3.Package: plastic bags and form paper as inside, wooden case as outside
4.Lead time:about 7~15days after receive your advance payment
(according the quatity)
Shipping terms: we offer air shipping(like dhl, ups, fedex, tnt or plain air shipping) and shipping by sea.All will be decided by your quantity.Shipping cost and shipping speed are the primary thing when we considering shipping.
33928 Titanium Bar Titan Gr2 Round Bar Suppliers
Short on time? Let Titanium Bar Titan Gr2 Round Bar sellers contact you.
1.Product description: The difference from chemically pure titanium is that industrial pure titanium contains a large amount of oxygen, nitrogen, carbon and various other impurity elements (such as iron, silicon, etc.), which is essentially a titanium alloy with low alloy content. Compared with chemically pure titanium, its strength is greatly improved due to the inclusion of more impurity elements, and its mechanical and chemical properties are similar to those of stainless steel (but still lower in strength compared to titanium alloys).
2.The characteristics of industrial pure titanium bars are:
low strength, but good plasticity, easy processing, stamping, welding, and good machinability; in the atmosphere, seawater, wet chlorine and oxidizing, neutral, weakly reducing media Good corrosion resistance and oxidation resistance are better than most austenitic stainless steels; but the heat resistance is poor, and the operating temperature should not be too high.
3.Industrial pure titanium bar is mainly used for working temperature below 350 â??, with little stress, but requires good plastic stamping parts and corrosion-resistant structural parts, such as: aircraft skeleton, skin, engine accessories; seawater corrosion-resistant pipes for ships, Valves, pumps and hydrofoils, parts of seawater desalination systems; chemical heat exchangers, pump bodies, distillation towers, coolers, agitators, tees, impellers, fasteners, ion pumps, compressor valves and diesel Engine pistons, connecting rods, leaf springs, etc.
1). Size: 25mm*25mm-250mm-250mm
2). Wall thickness: 1.5mm-25mm
3). Length: 1m-12m
4). Grade: Q195, Q235, Q345,SS400,SS540, S235JR, A36 etc
4). Certificate: ISO 9001-2008
5). Packing: Standard exporting package.
6). Delivery: Within 20 days after receiving the deposit.
7). Application: Framework of all kinds of construction and engineering; Construction joint ;Iron tower; Derrick frame ; Building structures, such as beams, bridges, transmission towers, lifting or transporting machines, shipping, industrial boilers ,product according to your needs.
Material SD390/490/400,B500B/GR460B,HRB400/500,ASTM A615 GR40/60
Standard
BS4449,JIS,ASTM/A615
Length
6m,12m
Application
Widely used in construction industry for reinforcing concrete(Express way; office building, Bridge etc) Transportation By sea(20' 40' container)
Standard: ASTM B265 JIS H4600 GB/T 3620.1
Material: ASTM Pure Ti: Gr.1 Gr.2 Gr.3 Gr.4 Ti Alloy: Gr.5 Gr.7 Gr.9 Gr.11
JIS Pure Ti: Class 1 Class 2 Class 3 Class 4;
JIS Ti Alloy: Class 60 Class 12 Class 61 Class 11 Class 60 E
GB Pure Ti:TA1 TA2 TA3 TA4;Ti Alloy: TC4 TA9 TC2 TC4 ELI
Shape : Round Bar / Square Bar/ Hexagon Bar
Diameter: 1.0mm to 300mm
Surface finish: Polished
Heat Treatment: Usually are Annealled,but Solid Solution & Aging can be also OK
Type: forged/rolled
Sharp: round and square
Gr.1,Gr.2,Gr.3,Gr.4,Gr.5,Gr.7,Gr.9(Ti-3Al-2.5V),
-Delivery Time: according to your products.
-Terms: according to negotiation
-Payment: according to negotiation
-Package: accord with our export package.
Rod-Diameter:8-15.5
Bar-Diameter: 20-200
Length: as customer's requirements(Up to 6100mm).
Explore the strength and lightweight characteristics of our 6063-T6 aluminum billets, tailored for aerospace applications. With a perfect balance of strength and malleability, these billets provide the foundation for manufacturing components that demand high-performance and reliability in the aerospace industry.
We are suppliers and exporters of Inconel alloy Rod, Pipes, Tubes, Plate, Fitting, Flanges, Flat etc in the grade Inconel 600, 601, 625, 718, Incoloy 800, 801, 825 etc.
Titanium bar/rod:
Name Rod and bar
Standard Industry:gb/t 2965 , astm b348
Medical:astm f67, atstm f136, iso 5832-2, iso5832-3
Aerospace:
Grade:ta1, ta2, ta3, ta4, tc4, tc4 eli, ti-6al7nb
Gr1, gr2, gr3, gr4, gr5(ti-6al-4v), gr5eli
Specification(diameter*l)(4.76-90.0)*(2000-3000)mm or according to customers requirements.
Certification Iso9001:2008, three party certification
Tolerance H7-h10
Appearance Rod/bar
Status M/y/t
Application Equipment accessories: airplane, ship, bicycle, motorcycle, auto, medical, chemical, wheelchair, sports, anchor, weapon, smelting, etc.Aerospace, industry, navigation, chemical plants, and so on.
Packing Domestic: standard wooden carton packaging;overseas:fumigation
Moq: 100kg
Delivery time 10~15 work days
Capacity: 10t/m
192 is the steel of carbon structural steel, which is a kind of alloy steel and carbon steel. The carbon content is about 0.05%~0.70%, and some can reach up to 0.90%. It can be divided into ordinary carbon structural steel and high-quality carbon structural steel.
Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.
Material
A192
Thickness
0.1mm-300mm or as required
Standard
AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique
Hot rolled,cold rolled
Surface Treatment
Clean, blasting and painting according to customer requirement
Thickness tolerance
�±0.1mm
Application
It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time
Within 7-15 workdays after receiving deposit or L/C
Export packing
Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity
250,000 tons/year
Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for
drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.
Warehouse Storage
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Performance and application of material ST37: the material has good performance, that is, through cold rolling, it can obtain cold rolled strip and steel plate with thinner thickness and higher precision, with high straightness, high surface finish, clean and bright surface of cold rolled plate in Taiwan Strait, easy to be coated, various varieties, wide application, high stamping performance, non aging, and low yield point.
Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.
Material
ST37
Thickness
0.1mm-300mm or as required
Standard
AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique
Hot rolled,cold rolled
Surface Treatment
Clean, blasting and painting according to customer requirement
Thickness tolerance
�±0.1mm
Application
It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time
Within 7-15 workdays after receiving deposit or L/C
Export packing
Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity
250,000 tons/year
Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for
drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.
* Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
* Technique : Hot rolled,cold rolled
Surface Treatment
* Clean, blasting and painting according to customer requirement
Thickness tolerance
+ 0.1mm
* Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
* Shipment time : Within 7-15 workdays after receiving deposit or L/C
Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity : 250,000 tons/year
* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
* Ordinary low alloy steel is a kind of ordinary alloy steel containing a small amount of alloy elements (in most cases, the total amount of w does not exceed 3%). This kind of steel has high strength, good comprehensive properties, corrosion resistance, wear resistance, low temperature resistance, and good cutting and welding properties.
* Under the condition of saving a lot of rare alloy elements (such as nickel and chromium), usually 1 t ordinary low alloy steel can be used for 1.2-1.3 carbon steel, and its service life and scope of use are much longer than carbon steel. Ordinary low alloy steel can be smelted in open hearth furnace and converter with general smelting method, and the cost is close to that of carbon steel.
Material : API5L
Thickness : 0.1mm-300mm or as required
Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique : Hot rolled,cold rolled
Surface Treatment : Clean, blasting and painting according to customer requirement
Thickness tolerance : �±0.1mm
Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time : Within 7-15 workdays after receiving deposit or L/C
Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity : 250,000 tons/year
* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.
33928 Titanium Bar Titan Gr2 Round Bar Suppliers
Short on time? Let Titanium Bar Titan Gr2 Round Bar sellers contact you.
