SEKO Machinery 30% higher speed straight welding seam titanium alloy pipe welded tube mill line specializes in industrial usage, like HVAC pipe fittings, sanitary tubes, water pipes, valve pipe fittings, petrochemical pipes, chemical industry, medicine industry, wine-making industry, petroleum industry, food industry, automobile industry, paper making industry, air-condition making industry and so on. Products dealed with our tube mill could reach ASTM, DIN, ISO, GB and JIS standard.
Hollow Section steel Tube is the general name for the steel pipe other than thecircular steel pipe. Such as square, rectangle, oval,elliptical, cone, trapezoidal, spiral, etc. Different steel pipe can more adapt to the particularity of use conditions, save metal and improve the labor productivity of parts manufacturing. It is widely used in aviation, automobile, shipbuilding, mining machinery, agricultural machinery, construction, light textile and boiler manufacturing. The methods of producing different pipes are cold pulling, electric welding, extrusion and hot rolling, etc. Compared with the round tube, the different tubes generally have a larger moment of inertia and cross section modulus, and have a large bending resistance and torsion resistance, which can greatly reduce the structural weight and save steel.
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
Circular steel pipe is both openings and have hollow concentric sections of steel larger than the surrounding. The specifications of steel pipes are indicated by appearance dimensions and inner diameter and wall thickness, with a wide range of dimensions from very small diameter capillary to large round steel pipe of several meters in diameter. Round steel pipes can be used for pipelines, thermal equipment, machinery industry, petroleum geological drilling, containers, chemical industry, and special uses. It can be divided into seamless, ERW, LSAW, SSAW steel pipe according to the production process.
Stainless steel tube is a hollow long strip steel made of stainless-steel material. Because of its excellent corrosion resistance, it is mainly widely used in petroleum, chemical, medical, food, light industry, mechanical instruments and other industrial transportation pipelines and mechanical structural components. In addition, when the bending and torsion strength are the same, the weight is light, so it is also widely used in manufacturing mechanical parts and engineering structures, but also commonly used in the field of furniture decoration.
Stainless steel pipe is divided into seamless pipe and welding pipe according to the production mode, seamless steel pipe can be divided into hot rolling pipe, cold rolling pipe, cold pulling pipe and extrusion pipe, etc., cold pulling and cold rolling is the secondary processing of steel pipe; welding pipe is divided into straight welding pipe and spiral welding pipe.
Stainless steel pipes can be divided into round tubes and different tubes according to the cross-sectional shape. The form tubes have rectangular tubes, rhomboid tubes, ellipse tubes, hexagonal tubes, octagonal tubes and various cross-sectional asymmetric tubes.
It can be divided into Austenitic Stainless Steel Tube Ferritic Stainless Steel Tube Martensitic Stainless Steel Tube and Duplex Stainless Steel Tube by the type of stainless steel.
Item Hot Dipped Galvanized Round Steel Pipe/GI Pipe/Galvanised Tube
OD 20~405mm in theory
Thickness 1.2~15.7mm
Length Any Length Below 16 Meter
Standard GB,ASTM,BS,EN,JIS
Material Chinese Grade, Q195, Q215 Q235, Q345
ASTM, Grade B,Grade C,Grade D,Grade 50
EN, S185,S235JR,S235JO,E335,S355JR,S355J2
JIS, SS330,SS400,SPFC590
Application Used For Water, Gas, Stream, Combustible Fluids And Other Liquid Delivery
Ends
Plain, Beveled, Thread With Couplings Or Sockets;
Plastic Caps And Steel Rings Can Be Provided If Possible
Surface Bared, Galvanized, Oiled, Color Paint, 3PE; Or Other Anti-corrosive Treatment
Technique Hot Rolled Or Cold Rolled ERW
Package Covered With Tarpaulin, Containers Or In Bulk
Item Hot Dipped Galvanized Round Steel Pipe/GI Pipe/Galvanised Tube
OD 20~405mm in theory
Thickness 1.2~15.7mm
Length Any Length Below 16 Meter
Standard GB,ASTM,BS,EN,JIS
Material Chinese Grade, Q195, Q215 Q235, Q345
ASTM, Grade B,Grade C,Grade D,Grade 50
EN, S185,S235JR,S235JO,E335,S355JR,S355J2
JIS, SS330,SS400,SPFC590
Application Used For Water, Gas, Stream, Combustible Fluids And Other Liquid Delivery
Ends
Plain, Beveled, Thread With Couplings Or Sockets;
Plastic Caps And Steel Rings Can Be Provided If Possible
Surface Bared, Galvanized, Oiled, Color Paint, 3PE; Or Other Anti-corrosive Treatment
Technique Hot Rolled Or Cold Rolled ERW
Package Covered With Tarpaulin, Containers Or In Bulk
Item Hot Dipped Galvanized Round Steel Pipe/GI Pipe/Galvanised Tube
OD 20~405mm in theory
Thickness 1.2~15.7mm
Length Any Length Below 16 Meter
Standard GB,ASTM,BS,EN,JIS
Material Chinese Grade, Q195, Q215 Q235, Q345
ASTM, Grade B,Grade C,Grade D,Grade 50
EN, S185,S235JR,S235JO,E335,S355JR,S355J2
JIS, SS330,SS400,SPFC590
Application Used For Water, Gas, Stream, Combustible Fluids And Other Liquid Delivery
Ends
Plain, Beveled, Thread With Couplings Or Sockets;
Plastic Caps And Steel Rings Can Be Provided If Possible
Surface Bared, Galvanized, Oiled, Color Paint, 3PE; Or Other Anti-corrosive Treatment
Technique Hot Rolled Or Cold Rolled ERW
Package Covered With Tarpaulin, Containers Or In Bulk
Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings.
According to the application:
1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc.
2. changing the direction of the pipe: bends, bends.
3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe.
4. pipe fittings with additional piping branches: three links, four links.
5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug.
6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc.
According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings
According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings.
Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.
Raw melting material - aluminum scraps, cans, engine waste etc.
Output capacity - 5-30 tons/h, customized
Automation - Full automatic/ half automatic (based on output requirement and investment budget
Ingot type - ADC12 (7.5kg/ 10kg / customized)
1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift;
2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing.
Every lot of production need to do testing .
3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water.
4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500
5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
Product Details:
Grade Gr. 1,Gr. 2,Gr. 3,Gr. 4,Gr. 5,Gr. 7,Gr. 9,Gr. 13
Usage/Application Surgery
Single Piece Length 3 meter, 6 meter
Shape Round, Rectangular, Square
Test Pressure Ultimate Tensile Strength,psi 138,000
Product Type Rockwell Hardness 36
Diameter 5 mm to 100 mm
Pipe Range 1/4\" NB to 6\" NB
Elongation 14%
Application Chemical Handling, Gas Handling, Utilities Water
Size/Diameter 3 inch, 1 inch, 1/2 inch, 2 inch
Titanium Pipes
Product Details:
Minimum Order Quantity 10 Kilogram
Size/Diameter 1/2 inch, 1 inch, 2 inch, 3 inch, 4 inch, >4 inch
Single Piece Length 6 meter
Application Drinking Water, Utilities Water, Chemical Handling, Gas Handling
Titanium Pipes
We offer wide range of titanium products in form of titanium pipes, pipe fittings, flanges, in all forms, shapes and sizes.
Grades - Titanium (Grade I & II)
titanium uses
titanium is as strong as steel but much less dense. It is therefore important as an alloying agent with many metals including aluminium, molybdenum and iron. These alloys are mainly used in aircraft, spacecraft and missiles because of their low density and ability to withstand extremes of temperature. They are also used in golf clubs, laptops, bicycles and crutches.
power plant condensers use titanium pipes because of their resistance to corrosion. Because titanium has excellent resistance to corrosion in seawater, it is used in desalination plants and to protect the hulls of ships, submarines and other structures exposed to seawater.
titanium metal connects well with bone, so it has found surgical applications such as in joint replacements (especially hip joints) and tooth implants.
the largest use of titanium is in the form of titanium(iv) oxide. It is extensively used as a pigment in house paint, artistsâ?? paint, plastics, enamels and paper. It is a bright white pigment with excellent covering power. It is also a good reflector of infrared radiation and so is used in solar observatories where heat causes poor visibility.
titanium(iv) oxide is used in sunscreens because it prevents uv light from reaching the skin. Nanoparticles of titanium(iv) oxide appear invisible when applied to the skin.
Titanium is a metal needed to make a variety of high-performance alloys. Most of the Titanium ore mined worldwide is used to manufacture titanium dioxide an important pigment, whiting, and polishing abrasive.
We are instrumental in exporting and supplying of premium quality Titanium ore. It is basically a black heavy ore of iron and titanium.
We can supply 3000-5000mt of Titanium ore per month to any destination.
Steel products refer to solid straight steel products with a certain section shape and size, including wire, profile and plate, which are formed by plastic processing except pipes. It can be divided into hot rolling, cold bending, cold rolling, cold drawing, extrusion, forging, hot bending, welding and special rolling according to the production method. It can be divided into railway, shipbuilding, mining, structure and construction according to its use. According to the material can be divided into carbon steel, alloy steel and stainless steel. At the same time, these steel products can be reprocessed to form semi-finished products or finished products to meet special requirements. We can according to the customer's different needs, according to the drawings or samples for reprocessing production.
Fasteners are the general term of the class of mechanical parts used in fastening two or more parts (or components) into a whole. It is widely used in energy, electronics, electrical appliances, machinery, chemical, metallurgy, mold, hydraulic and other industries, at the same time, in various kinds of machinery, equipment, vehicles, ships, railway, bridge, construction, structure, tools, instruments, chemical, instruments and supplies, you can see all kinds of fasteners, is the most widely used mechanical foundation parts. It is characterized by a wide variety of variety specifications, different performance uses, and a very high degree of standardization, series, and generalization. Therefore, a class of fasteners that already have national standards is called standard fasteners, or simply standard ones.
