In the field of industrial stainless steel welding, in order to obtain high quality weld quality. A argon arc welding (TIG) process will be used. When the process is automatically welded, as the welding speed increases, the arc will be dragged, and the faster the speed, the more obvious the penetration, which will affect the welding quality.
As shown in Figure 1, there are undercut problems on both sides and inside of the weld, and there is a "hump" problem inside and outside the weld. Especially for industrial welded pipes, sanitary pipes, when the undercut problem is not smooth, it will cause residual liquid and corrode the steel pipe. It also causes stress corrosion points. Therefore, in the field of industrial welded pipes, in order to obtain high-quality welds, it is necessary to reduce the welding speed and ensure the welding quality.
Firefighter protective Clothing: 2019 models:
Clothing outer fabric: The use of 210g arylon three anti-fabric, which not only has a permanent flame retardant, high temperature resistance, acid and alkali resistance and other properties, and its strong performance is very excellent, with high heat insulation, permanent flame retardant, high strength, anti-cutting, acid and alkali resistance, arc resistance and other characteristics, improve the overall protection performance of clothing, clothing overall main technical parameters are much higher than the industry standard and bidding technical requirements. The fire retardant performance of the firefighter\'s fire extinguishing suit: the warp and weft continuous burning time is 0s, the warp and weft damage length is less than 51mm; Breaking strength: longitude and latitude 1000N; Tear strength: longitude and latitude 120N; Moisture resistance 3, thermal stability: change rate 1.0%; Color fastness: Color resistance 4, water friction resistance 4.
Waterproof breathable heat insulation layer: aramid non-woven fabric and flame retardant PTFE film, gram weight 180g/m2. It can not only prevent the infiltration of water and other general liquid chemicals, but also discharge a large amount of hot gas generated in the body during fire rescue in time. The fabric has hydrostatic pressure & 50kPa, moisture permeability 5439g/m2/24h, oil-repellent performance 3, and thermal shrinkage 1%.
Comfort layer: The use of intermediate arylon fiber and flame retardant viscose fiber blended, gram weight 125g/m2, flame retardant performance, thermal stability and other properties are very good.
EQUINAS TFO 60i High Quality Inhibited Transformer Oil
EQUINAS TFO 60i is a high-quality inhibited insulating oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switchgear and other electrical insulating applications. Does not contain harmful polychlorinated biphenyls (PCBs).
Applications:
Used as an insulating oil in transformers, switchgear, inductors, condensers, transducers, and similar equipment, also at low temperature in outdoor use It insulates current-carrying parts from each other and from ground, carries away heat, prevents glow discharges, extinguishes electric arcs in switchgear, and impregnates insulating materials
Features and Benefits:
Excellent insulating properties
High dielectric strength (1)
Low power factor
Resists oxidation and deposit formation
Excellent low-temperature properties
Compatible with materials used in transformers
Does not contain any PCBs
Meets or exceeds the IEC 60296
Packages size:
Available in drums and flexibags
Health and Safety:
Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.
EQUINAS TFO 60u High Quality Un-Inhibited Transformer Oil
EQUINAS TFO 60u is a high-quality un-inhibited insulating oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switchgear and other electrical insulating applications. Does not contain harmful polychlorinated biphenyls (PCBs).
Applications:
Used as an insulating oil in transformers, switchgear, inductors, condensers, transducers, and similar equipment, also at low temperature in outdoor use It insulates current-carrying parts from each other and from ground, carries away heat, prevents glow discharges, extinguishes electric arcs in switchgear, and impregnates insulating materials
Features and Benefits:
Excellent insulating properties
High dielectric strength (1)
Low power factor
Resists oxidation and deposit formation
Excellent low-temperature properties
Compatible with materials used in transformers
Does not contain any PCBs
Meets or exceeds the IEC 60296
Packages size:
Available in drums and flexibags
Health and Safety:
Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.
The Fibre Metal F400 Head Gear is a durable and comfortable headgear for welding helmets. It features a 4-point suspension system for stability and comfort during extended use. The headgear is adjustable for a custom fit, and its sweatband helps to wick away moisture for added comfort. The Fibre Metal F400 Head Gear is compatible with a variety of Fibre Metal welding helmets, and its high-quality construction ensures reliable performance for professional welders.
1). Availble as a single gun (101) or two guns (201) welding System with independent and stepless time and currtent controls. Dual gun System has inter lock feature.
2). Automatic current regulation by fully closed loop D. C. Shunt feedback System ensures consistent delivery of optimum weld energy.
3). Current monitor will activate indicator lamp if desired current can't not be delivered.
4). Digital read out of actual weld time and current of last weld assists in set up and quality control.
5). Solid state control circuitry produces maximum reliability and accuracy of all functions.
6). Two wire control system miniminzes control cable and connector maintenance.
7). Deck weld feature sleectively adds hot plunge time for weld through deck applications.
8). Other features include chuck saver circuit, quick shutdown, lift check, and safety shut down.
9). Same as NELSON6000 profiles and control system.
Detail specifications:
Transforma Rating 7600 amps
Stud range 5/16" through 1"(8mm-25mm)
Fusing 400amp@230v and 200amp @460v&550V
Timing control 0.1-1.5 seconds, stepless
Regulated ourput 400-2150 amps, stepless
Case dim 860mm*560mm*1220mm
Weight: 450kg.
1, mechanized and remote current control thrust adjustment function allows 0-100a of adjustment
2, mechanized and remote current control thrust adjustment function allows 0-100a of adjustment
3, idea for ship building, construction, rack and truck,
4, acidic and basic welding rods of various grade can be used for welding all of black metals
350pcs/20gp, 750pcs/40gp, 900pcs/40hq
Net weight:18kg, gross weight:22kg
570*305*400
1, small and lightweight, portable and durable, reliable and economical.
2, good performance with automatic compensation for voltage fluctuation.
3, idea for light fabrication, repair and maintenance.
4, acidic and basic welding rods of various grade can be used for welding all of black metals
600pcs/20gp, 1200pcs/40gp, 1500pcs/40hq,
Net weight, 5.5kg, gross weight, 8kg
440*250*320
DC inverter arc welder (SSARC2000P) has the following characteristics
1. Compact in volume, light in weight and power saved.
2. Easy to arc initiation, resistance to interference, good force adjustment.
3. Stable welding current, low welding spatter.
4. Good welding result, deep welding pool, high intension.
5. Protection for over voltage, over current.
6. Automatic voltage pulsation compensation capability.
7. Applicable for various acid and basic welding electrodes.
This device is applicable for welding of such materials as stainless steel, metal alloy steel, carbon steel, copper and other non-ferrous.
Model No.
SSARC2000P
SARC120 dc inverter arc welder,mma welding machine welding machine has the following characteristics:
Inverter technology - Providing 140amps DC
Superb portability - Weighing only 3.4kgs
DC MMA mode
Scratch start
Offers precision welding of mild and stainless steels, alloy steels, copper and bronze
Input voltage detection
Load sensing circuit - Automatically reduces input current when machine is not under load
Hot start - For trouble free arc striking capability
Anti stick circuit
Turbo fan cooled
Thermal overload - Maximum safety guaranteed
International latest technology adopted, novel design, perfect workmanship, and excellengperformances;
Compact, light and easy in carrying;
Provided with automatic temperature protector and air-cooling unit, and highly effective and safe.
Model:
SSARC1200
1.High quality, excelent performance,stable arc,less spatters
2.Automatic voltage compensation.
3.IGBT inverter high running frequency,high efficiency,low noise.
4.Arc force currnet adjusted in succession.
5.With the protection function in over voltage and over heat.
Belinda(at)fortunetool.Com hope have a chance do business with you
Product details
Functional properties
* current stiffness, filling wire easily, forming beautiful
* remote control pedal control, adjustable current
* has the advantages of small volume, light weight, low noise
* use dc function for welding stainless steel, alloy steel,
* carbon steel, copper and other non-ferrous metals,
* using the communication function of welding of aluminum and aluminum alloy products
Accessory :
1)one pcs tig torch wp26 2)one pcsearth clamp with 3m cable.
Technical parameters
Project specification Wse200
Rated input power voltage frequency(v/hz) Ac220¡¡¡ì¡¨¨15%¡¡¡§|
50¡¡§o¡¡ê¡è60
Rated input power capacity(kva) 4.5
Output current range(a) 10-200
Rated output voltage(v) 18
No load voltage(v) 56
Load duration rate(¡¡§o¡¨º¡¨¨) 60
Arc way High frequency
Efficiency(w) 85
Class of insulation F
Power factorcos¡¡§¬¶ 0.93
Weight(kg) 32
Outline dimensions(mm) 580¡¡¡ì¡¨¦334¡¡¡ì¡¨¦480
Shell protection class Ip23
Prior to blowing time
(s) 0-2
Cleaning width
(%) 20-80
Decay time
(s) 0-5
After blowing time(s) 2-10
Remote control interface Yes
Suitable for welding thick plate(mm) 0.5-3
Performance Characteristics
Outstanding ARC Stability with Low Spatter.
Auto Protection against Over-Voltage and Over-Current.
Auto-Adaptive Arc Force minimizes electrode sticking in the puddle without compromising arc stability or increased spatter.
Automatic Hot Start boosts the current during starting to make striking an arc easier.
Wide Range for Input Voltage:220 +/-15%.
Super Protable and Energy Saving.
Portable with adjustable shoulder strap. At 4kg you can take it anywhere.
Quick Details
Rated Input Voltage: 43.6V
Rated Duty Cycle @40�C: 50%
Max. Load Power Capacity: 35 kVA
Rated Output Voltage: 24 V
Rated Output Current: 15 A
Condition: New
Place of Origin: Guangdong, China
Rated Duty Cycle: 60%
Motor Type: DC MOTOR
Dimensions: 280*125*200mm
Usage: Various wire welding
Voltage: AC220V�15%
Weight (KG): 5 KG
Certification: CE Certification
Key Selling Points: Easy to Operate
Applicable Industries: Building Material Shops, Machinery Repair Shops, Manufacturing Plant, Farms, Home Use, Retail, Construction works
After Warranty Service: Online support
Local Service Location: None
Showroom Location: None
Model Number: ZX7-250ST
Rated Input Current(A): 43.6
Inverter Technology: IGBT
Output Current Range(A): 20-200A
No-load Voltage(V): 58
Rated duty cycle(%): 60
Shell: Matal or solid plastic (optional)
Color: Any color according to client
Housing Protection Grade: IP21
Warranty: 12 Months
ULTIMATE EYE PROTECTION:Auto-darkening filter switches from light to dark in 1/25000 sec, in event of electric failure, the welder remains protecting against UV and IR radiation according to shade 16.1/2/1/2 rating meets ANSIZ87.1-2010 and EN3794/9-13 standards. A smart choice for safety
MANUAL ADJUSTMENT MEETS DIFFERENT DEMANDS: Equipped with sensitivity and delay settings for adaptability for different environments and task durations; Enjoy enhanced visibility and color recognition.Light level of filter is DIN4 and the time from dark to bright state within 0.1s to 1.0s
1.Automatic TIG (Plasma) Circular Seam Welding Machine mainly used for the high quality circular welding of round shape ,oval shape or special shape made with stainless steel, iron, aluminum and brass, etc;
2.According to the shape and size of each welding part, the machine can be designed as Horizontal Type and Vertical Type ;
3.The Workpiece rotation driving mechanism is composed with converter motor, reduction box , and three-jaw clamp, travel steadily with step less adjustable speed;
4.Clamp axle and fixing system pressing down , releasing and retreat , welding torchs action all are driven by air cylinders , furthermore welding torch has been equipped with precision micro-adjustment mechanism to get the best welding position;
5.Control system adopts PLC or Relay integrated control, reliable and simple interface , easily modify and maintenance;
6.Apply to cooperate welding with TIG, MIG, MAG, SAW and Plasma-Arc welding source.
ZX7 Series DC Arc Welder
ZX7 Series DC Arc Welder (IGBT Single Tube)
Welder
Adopt IGBT single tube inveter technology;
Control circuit PWM control technology using a reliable, constant resistance, welding current stability, precise control, superior performance;
High load duration, continuous welding;
The internal structure has three defense functions(dustproof, moisture-proof, anti-corrsion), improve the reliability of the machine in the bad environment;
The machine can be used in all types of welds, including acid, alkali, J507, J508, stainless steel electrode.
