The product is called pp, epe hot melt adhesive, suitable for the adhesion of hard sticky materials such as pp and epe. Softening point at about 80anti-temperature about 70 the opening time in 15-20 s.Our products are non-toxic and insipid. High viscosity, fast curing, easy operation, continuous use without carbonization and yellowing resistance, comply with rosh instructions.
Instructions:
1.Recommended gluing method: dispensing
2.Recommended temperature: 130 to 150
3.If there is carbon deposition in a rubber case or hose, may consult equipment manufacturer, or clean with clean mineral oil under 120.
4.The stickiness of the adhesive can be adjusted by temperature.
5.It is prohibited to mix with other brand hot melt adhesive.
6.After adding material to the hot melt tank, the glue tank cover should be closed immediately to prevent foreign contamination.Td-
Tiandiao hot melt adhesive, softening point of 80 degrees or so, this series product is suitable for display showcase display ark of goods such as a combination of adhesive, white to transparent block hot melt adhesive, guarantee the robustness and stability of adhesive products, viscosity is extremely strong, extra adhesive, suitable for all kinds of working environment.
Product td-828 hot melt pressure sensitive adhesive, good adhesion, resistance to aging, softening point 85 degrees, can resist high temperature 80 degrees not melting, -20 degrees do not peel away. The operating temperature is recommended at 165-175 degrees. Nowadays, it is widely used in paperboard, shop display rack, packaging materials, carton, cardboard, color box, glazed box of glazed oil carton, and film carton box... Base material coated with adhesive. The products have been certified by sgs, which is non - toxic. Welcome to the skycarving website www.Tiandiao.Com.For consultation.
This series of products can achieve good adhesion effect, environmental tasteless, high strength adhesion, cold resistance, aging resistance, etc. Excellent performance and stable quality can provide the perfect adhesion scheme to various manufacturers. Belongs to green environmental protection paper filter core special glue. Softening point of 80 degrees or so, oil resistance, water resistance, resistance to high and low temperature alternating, weak acid, excellent aseismic performance and good stick relay, fundamentally solve the industry's long plagued a filter degumming problem such as rubber, plastic shrinkage, crack, is currently the most ideal paper filter adhesive. Room temperature curing, the process is simple, easy to use, can be manipulated manually, can also mechanical operation.
Resin hot melt adhesive, softening point of 80 degrees or so, this series of product is suitable for display rack of goods. They have several models, such as a combination of adhesive, white to transparent block hot melt adhesive, guarantee the robustness and stability of adhesive products, viscosity is extremely strong, without extra adhesive, suitable for all kinds of working environment.
Product td-828 hot melt pressure sensitive adhesive, good adhesion, resistance to aging, softening point 85 degrees, can resist high temperature 80 degrees not melting, -20 degrees do not peel away. The operating temperature is recommended at 165-175 degrees. Nowadays, it is widely used in paperboard, shop display rack, packaging materials, carton, cardboard, color box, glazed box of glazed oil carton, and film carton box... Base material coated with glue. The products have been certified by sgs, which is non - toxic.
This product is suitable for bonding and combination of pearl cotton, softening point of 80 degrees or so, and yellowing resistance, will not affect the product quality and color specifications, such as the maximum extent to ensure the stability of the bonding material, not out of shape. For white colloid form. Epe pearl cotton glue composition analysis, curing material, viscosity, non-volatile detection. Epe pearl cotton glue ingredient analysis, curing content, viscosity, nonvolatile matter detection epe glue is a kind of polymer as the main body of one-component adhesive products, the new solution designed to remove epe materials difficult problem of epe special glue.
1.It has the advantages of room temperature curing, convenient operation, high initial adhesion, transparent, yellow and yellow change, fast positioning and non-toxic. 2. Single component, excellent water resistance, heat resistance, cold resistance, aging resistance, acid and alkali resistance, corrosion resistance, oil resistance and albinism. 3. Through the eu rohs standard, the storage of 1 year will not deteriorate, is the current domestic adhesion nylon plastic adhesive field of the first product. Epe materials dedicated plastic glue adhesive is widely used in epe foam packaging material, suitable for epe foam epe foaming, pp, pvc, sponge, foam, wood, polystyrene material such as glue, as well as the pearl cotton, soft material such as eva adhesive effect is obvious.
5470 Tiandiao Hot Melt Adhesive Pp Hot Melt Adhesive Suppliers
Short on time? Let Tiandiao Hot Melt Adhesive Pp Hot Melt Adhesive sellers contact you.
This series product viscosity is extremely strong, white stick or granular, also has the yellow granular and stick, softening point of 80 degrees or so, short curing time, widely used for automatic packaging, carton packaging and color box packaging and other kinds of packaging requirements, guarantee the stability of adhesive products to the greatest extent, no deformation, ensure the quality of the goods packaging, do not package materil.
The product is based on a number of similar products in china, and a new kind of single-group strong adhesive is introduced according to the user's requirements. It is suitable for the bonding of carton, paper box, automation, color box and other products. Products which use it are firm and smooth without extra adhesive. The product has wide applicability, stable quality and has been well received by users since it was launched. First, the film products need to be treated with adhesive and then apply the adhesive evenly to the surface with a brush or scraper. The coating thickness is between 0.1 and 0.5mm, according to the paper degree. Hold it at a stop, then add pressure, and after 24 hours, it will be bonding.
This series of products are suitable for all kinds of sealing mouth glue, softening point of 80 degrees or so, mainly for the bottom of the bag, carpet glue, carpet ruffled, express single seal, wood sealing side, automotive interior bonding, arm in arm bag on the ground, dialysis paper, paper bag sealing glue sealing purpose, guarantee the bonding material without extra adhesive, stability, safety and health, no harm to human body, no taste, using at ease. Suitable for carton sealing, milk powder box, other color box and other sealing or bottom, side bonding with hot melt adhesive. Open time moderate, very excellent low - temperature resistance. - 20 below zero remains very strong cohesive force. It has very good temperature resistance. The product has good weather resistance and strong adhesion.
This product is used for bookbinding, cartons, bags and other light adhesive non-woven fabric, the td-1018 strongest viscosity, as the rubber type hot melt adhesive, softening point of 80 degrees or so, for granular or massive viscosity is extremely strong, the maximum extent to ensure adhesive of robustness, do not come loose page, page not to drop, does not glue, to ensure the stability of the adhesive.
Professional for all kinds of binding books, such as textbooks, specifications, periodicals, etc. Appearance: milky colloidal particles (gum) transparent white colloidal particles (edge glue) ingredient: eva specification: 25 kg/bag storage: as for a cool and dry place instructions: 1) open and curing time will as the working environment temperature, the temperature of the glue, pressing time and pressure maintaining power and change. 2) different hot melt adhesive should be selected according to different paper. Using temperature shall not exceed 200 â??, lest cause coking decomposition, also cannot use temperature below, otherwise the lower bonding strength; suggest that the temperature 150-180
Tiandiao hot melt adhesive, softening point of 80 degrees or so, the series of products for a variety of clothing accessories, advanced material glue, shoe glue, wide range of uses, tasteless colorless, non-toxic, belong to the environmental protection hot melt adhesive, guarantee the stability of the clothes and shoes to prevent the degumming, no effect to human body health.
Material rubber features are melting point of 80 degrees or so sticky: 3000 mpa. S / 150 shear strength: 210 n/min, transparent yellow granular, without impurities, no bubble. This product has strong adhesiveness, good thermal stability, the advantages of high hardness, no wiredrawing, suitable for high-end shoe adhesive and various kinds of clothing accessories, leather folding with hot melt adhesive, leather case is mainly used for albums, hardcover notebook cover, bags and other leather materials and use. The product is through sgs environmental detection, cheap and fine.
1) Label Adhesive for coating of face stock materials such as (Paper, PET, PE, Foil).
2) Tape Adhesive for coating on BOPP, double sided tape, medical coating, band-aids.
3) DIY floor adhesive for PVC floors.
4) Shoe Adhesive hot melt used for stitching
5) Bookbinding hot melt used for spine bonding.
6) Woodworking hot melt used for profile wrapping, panel assembly and edge banding.
7) Non-woven hot melt used for diaper construction, positioning and elastic
The wide range of continuous output melting units model mitsu enables to process any kind of hot melt adhesives in blocks or chips with working temperatures up to 240°c, including reactive pur and uv-curable ones.
The melting rate varies from 2.5 to 160 kg/h, according to different models, giving an appropriate answer to all high, medium and low melting requirements.
This modular system enables to conform to different production needs thanks to partial use function and possibility to integrate later on the melting capacity.
Uses:it is fit to be used for the adhesion of materials like electric appliances, heat-shrinkable material, packing material, fabrics, leather, lumber, plastic, metal, ceramics, etc.
Performance:it is transparent, light yellow viscous solid, non-toxic, no stimulation, soluble in most organic solvents, non-soluble in water. It has good mechanical strength, good fluidity, excellent tenacity and high adhesion strength.
Our Company Offer Good Quality Of Hot Melt Adhesive Include Glass Transparent And Normal Adhesive.
Item Color
Low Tempreture Light Yellow, White, Brown
130-150.C
Middle Tempreture Light Grey, White, Brown, Light Yellow
150-180.C
High Tempreture White , Brown, Light Yellow, Grey White
180-210.C
FEATURES
Elastic attachment adhesive for disposable hygiene products. excellent creep performance on all types of elastic, especially synthetic rubber. Has excellent adhesion to PE, PP and NW. also can be applied as a construction adhesive.
APPLICATION
For NONWOVEN SIDE TAPE PRODUCTION
STORAGE
Store in a dry place where the temperature is below 40ºC and the storage life is one year.
PRECAUTIONS
1.Do not mix with other adhesives.
2.Keep containers and pre-melters covered to avoid contamination.
3. Material is applied hot. Appropriate clothing and eye protection should be used.
4. Rotate stock - first in, first out.
1.Product Name:Hot Melt Glue Stick2.Product Description:(1) Usage ElectronicHandcraft ToyCarton packingMetalPlasticBox, .(2)R&B SOFTENING:85 ±5(3)SOLID CONTENT:100%(4)CURING TIME:5~8S(5)OPENING TIME:10~13S(6)BROOKFIELD VISCOSITY:150 .13000CPS160 12500CPS180 ......................................12000CPS(7)Character:high viscosityNon wire drawingCold-resistanceNo loss of viscosity, etc.(8)Certification:SGS Environmental Protection ReportROHS AuthenticationMSDS Safety Report(9) NON-TOXICITYÂ Â (10)Recommended Application Temperature:150-160(11)HS CODE:3506919090(12)OEM:accepted(13)Valid time:1 year(14)Storage:indoor(clean and dry)(15)Packing and shipping:1kg/ctn 2kg/ctn 20kg/ctn 25kg/ctn,The package can be customized as your requirement.Delivery:common specification5days(16)Answers to your doubts(17)About usWe take our customers to visit factory and win customers praise.
5470 Tiandiao Hot Melt Adhesive Pp Hot Melt Adhesive Suppliers
Short on time? Let Tiandiao Hot Melt Adhesive Pp Hot Melt Adhesive sellers contact you.
