Find Verified Thread Bar Heat Treatment Line Suppliers, Manufacturers and Wholesalers

So far forever has already had many sucessful cases for thread bar heat treatment line, such as , ¸20-25 thread bar heat treatment line, , ¸20-38 thread bar heat treatment line, , ¸38-45 thread bar heat treatment line.

Thread bar heat treatment line features
1.Material suitable: s45c, scm44042crmo4, 16mncr5, 40cr4
2.Process: hardening, tempering , annealing, solution treatment
3.Control system:plc siemens control
4.Feeding way:automatic feeder
5.Used for heat treatment of bar, rod, pipe, tube, plate etc.

Thread bar heat treatmetn line advantages
1high reliability:adopt famous brand components of igbt power supply which reduce fault rate and make sure the equipment can run reliably.

2.Safe and reliable.There are reliable protection covers for the mechanical rotating parts, which is durable and very safe for operators. Automatic protections for water temperature, water pressure, phase shortage, overcurrent and undervoltage.

3.Easy installation & commission and simple operation.

4.Transmission mechanism frame has sufficient strength and rigidity for ease of installation of equipment

5.Feeding and discharging table is using high quality steel welded firmly, which can withstand a certain impact load.

We hold immense expertise in making available Copper in many forms
including LME registered and non registered cathodes, billets, rods,
cakes, bars, foil, sheet, granules, plates, powder, shot, turnings, wire,
insulated wire, mesh and “evaporation slugs”.
Copper is one of the most important metals. Copper is reddish with a bright metallic
lustre. It is malleable, ductile, and a good conductor of heat and electricity (second
only to silver in electrical conductivity). Its alloys, brass and bronze, are very important.
Monel and gun metals also contain copper. The most important compounds are the
oxide and the sulphate, (blue vitriol

The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.

At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.

The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.

The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.

The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.

Please feel free to contact us for further details.

Waste Specification:
European Classification: E46
EWC Code: 19.01.02
Basel Code: B10 10

The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.

At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.

The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.

The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.

The collected stock, is stored in open air, on cemented flooring.

Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.

Please feel free to contact us for further details

Thickness Tolerance+/-0.01mm
Width Tolerance+/-0.05mm
Surface nature, blue, yellow, white, polished, white polished, bright, black
Coils weight as your request
MOQ 1 Ton
Monthly capacity 500 Tons
Package Standard Seaworthy Package
Payment L/C, Western Union, D/P, D/A, T/T, Trade assurance
Application
band saw blade, rolling shutter spring, bricklayer trowel, plaster trowel, putty knives, scraper, power trowel blade, lawn trowel
blade, shoe insole, flat spring, toy spring, spring baskets etc.

Spring steel strip
Steel grade
65Mn,1065,SAE1055,1045,CK50,CK55, CK60,CK67, CK70,CK75, C75Cr1,50CrV4, 51CrV4, 60Si2Mn, etc
Thickness 0.08-4.0mm
Width 3-400mm
Hardness <200HV, 200-300HV, 300-550HV
Edge slit edge; both rounded; one side round, one side slit; square etc
Surface polished (blue, yellow, white, grey-blue, black, bright) or Nature etc
Tolerance thickness +/-0.01mm max; width +/-0.05mm max
Physical propety Tensile strength: 450-1850N/mm2

Thickness Tolerance +/-0.01mm
Width Tolerance +/-0.05mm
Surface nature, blue, yellow, white, polished, white polished, bright, black
Coils weight as your request
MOQ 1 Ton
Monthly capacity 500 Tons
Package Standard Seaworthy Package
Payment L/C, Western Union, D/P, D/A, T/T, Trade assurance
Application
band saw blade, rolling shutter spring, bricklayer trowel, plaster trowel, putty knives, scraper, power trowel blade, lawn trowel
blade, shoe insole, flat spring, toy spring, spring baskets etc.

Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer)
Basalt fiber reinforcement (new material to replace reinforcement)

Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã??
Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters)
1. The cost is the same as that of ordinary reinforcement;
2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa,
3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust.
4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges.
5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement.
6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??

Product Brief Introduction: with the largest consumption for construction and building materials. It is mainly used as enamel fluxing agent, glass opalizing agent, acid-proof clay, acid-proof concrete coagulator and wood preservative. It can also be used for insecticide.

Product Hazard or Harmful Ingredients:It does not combust or explode but has corrosivity and certain toxicity.

Product Physical Properties:The product is white powder crystals and basically neutral. It is difficult to dissolve in water and acid and the density is 2.37g/cm3.

Product Chemical Properties:It is stable under normal temperature. It does not combust nor explode when it is heated or contacts with redox materials.
Spillage Treatment Method:Simple cleaning and burying

Protection Measures for Product Transport & Storage:To prevent from caking and going bad, it should be kept indoor or be covered with protection materials like canvas and free from the blazing sun.

Packing :Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg/1200kg.

Other Information: Anti-caking agent can be added at the request of customers.

Technical Specifications

Analysis items Standard
Na2SiF6 99% min
Loss of weight on drying at 105â?? 0.3% max
Free acid (as HCl) 0.1% max
Chloride (as Cl) 0.1% max
Sulphate (SO4) 0.3% max
Iron(Fe) 0.02% max
Water-insoluble matter 0.5% max
Particle size distribution
Passing through 40 mesh sieve 98% min
Passing through 60 mesh sieve 90% min
Passing through 325 mesh sieve 25% max

Product Name:Aluminum sulfate
Molecular Formula:AL2(SO4)3
Hs Code:2833220000
CAS Code:10043-01-3
Standard:HG2225-2010

Shape:flake, powder, 2-4cm lump and 2-5mm/3-8mm granular

Properties:There are two types,anhydrous aluminium sulphate and aluminium sulphate octadecahydrate. In normal condition , it is AL2(SO4)3�·18H2O; AL2(SO4)3�·14H2O after efflorescence, can be white powder , glittering flaky or crystalline flakes, odorless, sweet to slight bitter.

Use:Sewage Treatment, treatment of drinking water, Sizing of paper , Cement Additive.

Specifications
Item name Standard
AL2O3 15.6% 16.5% 17%
Fe2O3 0.5 %  0.005 % 0.004%
PH value 3.0 3.0 3.0
Water insoluble matter 0.2% 0.04% 0.03%

Packing 25kg or 50kg or 1000kg in plastic lined woven bag

Product Name:Aluminium sulphate
Molecular Formula:AL2(SO4)3
Hs Code: 2833220000
CAS Code:10043-01-3
Standard:HG2225-2010

Shape:flake, powder, 2-4cm lump and 2-5mm/3-8mm granular

Properties:There are two types,anhydrous aluminium sulphate and aluminium sulphate octadecahydrate. In normal condition , it is AL2(SO4)3 18H2O; AL2(SO4)3 14H2O after efflorescence, can be white powder , glittering flaky or crystalline flakes, odorless, sweet to slight bitter.

Use:Sewage Treatment, treatment of drinking water, Sizing of paper , Cement Additive.

Specifications
Item Name Standard
AL2O3 15.6% 16.5% 17%
Fe2O3 ¤0.5 % 0.005 % 0.004%
PH value .0 3.0 3.0
Water insoluble matter 0.2% 0.04% 0.03%

Packing 25kg or 50kg or 1000kg in plastic lined woven bag

Commodity: Sodium bicarbonate
Synonym: Baking Soda; Bicarbonate of soda; Sodium acid carbonate; Monosodium carbonate; Sodium hydrogen International CHEMTREC , carbonate; Carbonic acid monosodium salt
Molecular formula:NaHCO3
Molecule Weight:84.01
H.S code:28363000
CAS:144-55-8

Characteristics: White powder or tiny crystalls, nodorousand salty, easily soluble in water,insoluble in alcohol, presenting slightly alkalinity, decomposed when heating. Decomposed slowly when exposed to moist air.



Quality Standard
Item The National Standard
The Total Alkalinity Content(NaHCO3)% 99.0, 100.5
Loss on Dring% 0.20
PH Value(10g/1) Solution, 8.6
Arsentic Content% 0.0001
Heavy Metal Content, 0.0005
Ammonium Salt pass
Clearness pass

Uses: food fermentation, feed addive, detergent ingredient, carbon dioxide foamer, pharmacy, leather, ore milling and metallurgy, detergent for wool, extinguisher and metal heat-treating, fiber and rubber industry, etc.

Packing:25kgs or 50kgs plastic woven bags lined with one layer polythene bag.
(We can meet with all your demands according with your need.)

Commodity: Sodium Bisulfite
Molecular Formula: NaHSO3
Molecular Weight: 104.06

Properties: White monoclinic crystalline powder with sulfur dioxide odor; relative density: 1.49; very easily soluble in water; can be decomposed when heated; slightly soluble in ethanol; aqueous solution is acidic; has strong reducing property; can be oxidized in the air or loose sulfur dioxide.

Quality Standard: HG/T3492-80
Technical Indicator High-purity grade Acrylic grade Food grade Refined grade Industrial grade 1
NaHSO3 % 99.5
Insol. in water % 0.003, 0.005, 0.03, 0.04, 0.05
Chloride(Cl) % 0.003, 0.004
Iron(Fe) % 0.001 0.002 0.005
Heavy metal(Pb) 0.001
Arsenic(As) % 0.0001
Clarity test Qualified

Use: It is used in the bleaching of cotton textiles; as reducing agent in dyes, paper-making, leather, chemical synthesis; in the manufacture of pharmaceutical intermediates, developer, food bleacher, antiseptic and anti-oxidants.

Packing: In PP woven bag lined with PE bag; paper-plastic composite bag, and kraft paper bag etc.

Net wt.: 25/50/1000 kgs/bag or upon clients' request.

Commodity: Sodium Metabisulphite
Molecular formula:Na2S2O5
Molecule Weight:190.10
H.S code:28321000
CAS:7681-57-4

Product Features
Appearance : White Or Light Yellow Crystal Powder
Odour: Sulfur Dioxide
Taste : Salty
Melting Poing : 150
Specific Density1.48
Ph : 4.0-4.6
Solubility : Soluble In Water ,insoluble In Alcohol

Application:
1. For industry
Mordant of printing and dyeing; Dechlorinate of textile after bleaching;
Sulphonated agent and reducer of chemical industry and pharmacy;
Bleach of paper pulp, bamboo and timber bleach of stapk; Treatment agent of waste water; Rubber solidifying agent ;Perfume industry is served as hydrocarbon perfume aldehyde ;
The hide profession employ to do to molt dose and pliable dose and wearproof dose ,The sensitize industry is served as the developing agent reductant and the protection of fixing bath dose and so on; sewage treatment.
2.For food additive
Bleach agent (e.g.candies, cake, bamboo shoots, etc);Loose agent (e.g.bread, cracker etc);Antiseptic and germicide (e.g.fruit juice, tinned foodbrews, the cereals food is defended storage etc);Inhibitor and freshen agent (e.g.day lily, seafood, fruit and vegetable etc)

Specifications:
Na2S2O5 97% min
SO2 65% min
Fe 0.0015% max
water-Insoluble 0.01% max
As 0.0001% max
PH 4.0-4.6

Packing and Storage
Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg/1200kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.

Commodity:Sodium persulfate
Molecular Formula : Na2S2O8
Molecular weight : 238.13

Description
Sodium persulfate is a white,crystalline,odourless salt.It is used as initiator for the Polymerization of monomers and as a strong oxidizing agent in many applications.It has the particular advantage of being almost non - hygroscopic,of having a particularly good storage stability as a result of its extremely high purity and of being easy and safe to handle.
Transportation
Road/Rail transport : GGVS,GGVE,ADR,RID/CLASS 5.1 Sea transport : GGV Sea/IMDG code : CLASS 5.1 Page 5185,UN no.1505
Water hazards class 1(slight water hazard)
All information is given in good faith,but without warranty,since the conditions of use are outside our control. Verification by the user is recommended.Freedom from patent restriction cannot be assumed.
Package
(1) In 25kgs net multiple paper bags with one PE bag inner
(2) In 25kgs net PE bags
(3) In 25kgs net woven bags with two PE bags inner
(4) In 1000kgs net big woven bags with one PE bag inner
The above package is also with a pallet 1000kgs each.
Storage
NPS(SPS) is not combustible but assists combustion materials due to release of oxygen.Provided it is stored under appropriate condition.It must be stored dry in closed containers and protected from direct sunlight,heat and humidity.Impurities such as dirt,rust or traces of metal and reductants may cause catalytic decomposition.The product as supplied or in solution needs to be handled with appropriate care.The eye,skin and clothes must be protected when working with NPS(SPS) as damp powder or aqueous solution has a bleaching and slightly corroding effect.
Application
Polymerization : Initiator for the emulsion or solution Polymerization of acrylic monomers,vinyl acetate,vinyl chloride etc.and for the emulsion co-polymerization of styrene,acrylonitrile,butadiene etc.
Metal treatment : Treatment of metal surfaces(e.g. in the manufacture of semiconductors;
cleaning and etching of printed circuits),activation of copper and aluminium surfaces.
Cosmetics : Essential component of bleaching formulations.
Paper : modification of starch,repulping of wet - strength paper.
Textile : Desizing agent and bleach activator - particularly for cold bleaching.(i.e.bleaching of Jeans).
Others :
- Chemical synthesis
- Water treatment(decontamination)
- Waste gas treatment,oxidative degradation of harmful substances(e.g.Hg)
- Disinfectant
ITEMS SPECIFICATIONS
Appearance white crystalline salt
Assay 99.0% w/w min
Active oxygen 6.65% w/w min
Chloride and chlorate(as CL) 0.005% w/w max
Ammonia (NH4) 0.05% w/w max
Manganese(Mn) 0.0001% w/w max
Iron(Fe) 0.001% w/w max
Heavy metals(as Pb) 0.001% w/w max
Moisture 0.05% w/w max
Decomposition of the product as supplied at above 65C
Recommended storage temperature Normal Temperature
Storage stability as from date of delivery 12 months

Commodity: Dicalcium phosphate Feed Grade
Use
DCP is the feed preparation of raw materials, Animal right to supplement calcium needs. Coarse its products more applicable to the preparation hens, ducks feed, concentrate feed and premix.
Product Nature
Molecular Formula:CaHPO4·2H2O,Molecular weight:172.09,After drying with loose white powdery crystals or granules. Neutral products, the melting acid, water-soluble, hygroscopicity small, heated to 90 around gradually lose water of crystallization.

Product Features
The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 18% of the products, due to a small amount of MCP, and its biological effects better.
This unique high-tech companies use technology to make our products crystallization, high purity and its harmful impurities significantly below standards:HG26362000
Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction.
Coarse particle DCP in the animals stay in the stomach longer and more conducive to the absorption of calcium phosphate, the product of Micro-particle DCP granulation from mechanical, without any chemical binder.

Specifications
Appearance white and gray powder/granule
Total P 18% min
Calcium 21% min 
F 0.18% max
As 30 ppm max
Pb 30 ppm max

Packing and Storage
Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.

Hair care cosmetics (bb cream, smoothing, sealing, volume reduction, shampoo, conditioner). Professional and personal care lines. Cosmetics for body treatment (moisturizing creams, exfoliating, etc.). Retail and professional (salons, barber shops). Certified Brazilian industry.

Product of Unilever Indonesia

Dove Variants are:
1. Bar Soap: Reg White. White Beauty
2. Conditioner: Total Damage Treatment, Total Hairfall Treatment.
3. Shampoo: Daily Shine, Dandruff Care, Total Damage Treatment, Total Hairfall Treatment, Hair Growth.