T1/11-bh2 microwave oven thermostat, used in coffee pot, oven, microwave oven, water heater, electric kettle
1.T1/11-bh2 microwave oven thermostat, electric oven thermostat, thermal cutout, coffee maker thermostat
2.Ceramic with loose bracket
3.Electrical ratings: ac250v /125v, 10a/15a/16a
4.Normally closed or normally open
5
Certificates
A) ul certificate: e202192
B) vde certificate: 40008055, 40019583
C) tuv certificate:r50091223, r50084309, r50091213, r50091107, r50099855
Ultrasonic cleaners
Tank working dimensions 10 x 6 x 6 inch
Capacity 6 ltrs.
Ultrasonic power 150 watts
Material 316 grade 1.5 mm thick stainless steel
Outer casing stainless steel
Timer: mechanical timer 0-30 minutes
Heater: thermostatically controlled heaters
Lid: ss lid
Optional : basket.
85 Thermostat 3H6 01030 0 3H6010300M Suppliers
Short on time? Let Thermostat 3H6 01030 0 3H6010300M sellers contact you.
60 cm BUILT IN OVEN
INOX panel
with 2 buttons (standart buttons)
electrical oven
0+3 functions oven control
Upper-Lower heating element
thermostat for electrical oven
cooling fan
1 tray+1 grid in the oven
standart black enamel cavity
(easy to clean enamel)
side wire racks
oven lamp
double door oven glass
(Removable glass)
standart black color oven door glass
standart carton packing with polyfoam
White insulation
2 pin standart european type plug
1) Applicable to electric water heaters, water boilers, electric ovens, warm air heaters, washing machines and fryers
2) Designed temperature: -30 - 350C
3) On-off temperature difference: 2 - 9C
4) Service temperature control range: 0 - 40C, 30 - 85C, 30 - 90C, 30 - 110C, 50 - 300C, 50 - 320C
5) Rated voltage and current: AC 250V, 16A
6) Centres of installing hole: 28mm, with M4 screw
7) Can be manufactured on customers requests apillary wire + Copper/SS sensor.
Bdi-50 Hot air universal oven (memmert type)
(Three side heating elements)
Standard double wall fabrication, Inner chamber made of richly anodized aluminium or highly polished stainless steel sheet. Exterior fabricated out of thick milled steel sheet duly finished in white stoving enamel/powder coated paint with mat finished colour combinations.
Kanthal wire heating elements provided on three sides to attain quick and uniform heating in range of 50° C to 250° C ± 2° C, controlled by capillary type thermostat. L-shaped thermometer is built-in type. Control panel is provided with selector switch of high or low rates of power thermostat control Knob and indicators for mains & thermostat. Supplied with cord and plug. The equipment is suitable to operate on 220 V AC 50 Hz single phase.
Chamber size in mm / Inches No. of Capacity
H W D (Approx.) Shelves (Approx.)
a) 300 x 300 x 300 (12” x 12” x 12”) 2 28 ltrs.
b) 350 x 350 x 350 (14” x 14” x 14”) 245 ltrs.
c) 450 x 450 x 450 (18” x 18” x 18”) 295 ltrs.
d) 600 x 450 x 450 (24” x 18” x 18”) 2 125 ltrs.
e) 600 x 600 x 600 (24” x 24” x 24”) 2224 ltrs.
f) 900 x 600 x 450 (36” x 24” x 18”) 2252 ltrs.
g) 900 x 600 x 600 (36” x 24” x 24”) 2336 ltrs.
h) 900 x 900 x 900 (36” x 36” x 36”) 3480 ltrs.
Optional:
i) Air circulating fan.
ii) Timer 0-24 hours
iii) Imported Thermostat “EGO” / “JUMO” German with the Accuracy of ± 1°C.
iv) Digital temp. Indicator-cum-Controller.
v) Microprocessor PID digital temp. Indicator-cum-controller.
Description
DIN-Rail Mount Advanced Climate Control Module that installs near HAVC unit to save cost of wiring and to eliminate the need for standard ugly thermostats. being S,BUS enabled it can be controlled flexibly from any DDP panel and any BMS Automation Software. The HVAC2 Module can control Single and Multi stage Units (Heat, Cool, Fan low, High, Medium, VAV 0-10VDC) it can Handle any FCU, AHU, VAV System. With easy labeling space, Comes ready with LED indicator, network health, broadcast button. Good for applications witch require energy saving, Health intelligent control such as residential, commercial or industrial.
HVAC Compatibility
• All Types of FCU
• All Types of AHU
• VAV 0-10VDC
• Relay Driven Fan Speed (H,M,L).
Description:
For an excellent full-color imprint all you need is the SFS cap press, a polyester front cap and a sublimation transfer.
Features:
Turn caps into walking advertising for your customers, teams, and more
Lightweight and portable for use at malls, flea markets, shows, and more
Sturdy design with a strong support base
Simple to use timer and digital temperature controls
Interchangeable lower platen for ball, golf (standard), or youth caps
Pressure adjustment, auto-reset timer, thermostat and heat indicating light
One-year warranty on the heating element
Color: Silver Grey
Specifications:
Size (L W H): 34X20X57 cm
Net Weight: 11.5Kg
Gross Weight: 12.7Kg
Voltage ú¦220-250V
Power ú¦350W
Temperature Range ú¦0-299íµ
Timing Range ú¦0-999Sec.
DTS series liquid thermostat is the ideal temperature constant temperature equipment for verifying and calibrating various low temperature thermocouple, industrial thermal resistance, pressure thermometer, bimetal thermometer, glass liquid thermometer and other temperature sensors. The tank body adopts the structure of lateral stirring in the design. The technical indicators of the temperature field in the working area meet the technical requirements of the temperature uniformity and temperature fluctuation of the constant temperature tank. At the same time, this series of liquid constant temperature tanks have simple operation and convenient use. Etc.
Technical Parameters
Product name DTS refrigeration thermostat
Model DTS-01 DTS-10 DTS-35 DTS-40 DTS-60 DTS-80
Temperature range 0-105 -10-105 -35-105 -40-100 -60-100 -80-100
Working medium Antifreeze Absolute ethanol, antifreeze
Uniformity of temperature field Level 0.01 0.01 0.01 0.01 0.01 0.01
Model Number: SAS908FCT¡K
Type: Fan Coil / Air Conditioning /Cooling Certification: CE
Logo: OEM or SASWELL color: white
Introduction
The SAS908FCT...fan coil room thermostat is used in air conditioning system.
Application
This fan coil room thermostat is apply to Commercial buildings, Residential buildings, Light industrial buildings, hospital
Features
2-pipe or 4-pipe heating/cooling available
Remote controller available
Room card function / Window card function available/ External sensor avaialble
Display shows both set points and room temperature simultaneously
Auto fan with adjustable 3-fan speed.
Keep user setting during power loss
Anti-freezing protection
Technical data
Voltage: AC100- 240V 50/60Hz
Load: 3A / 8A
Setting range: 5¢Xc~35¢Xc
Accuracy: ¡Ó0.5¢Xc
Ambient temperature: 0~50¢Xc
Protective housing: IP21
Housing material: PC+ABS
Dimensions: 115mm¡Ñ90mm¡Ñ16mm Flush mount or wall mount
50pcs per carton.
carton:51cm*30cm*31cm .
Packaging Detail: 50pcs per carton. carton:51cm*30cm*31cm .
Delivery Detail: for 500pcs, leading time in 25days after got receipt from bank.
Model Number: SAS816FHL-0
Type: Floor heating / Electrical heating
Certification: CE logo: OEM or SASWELL color: white
Packaging Detail: 100pcs per carton. carton:51cm*30cm*31cm .
Delivery Detail: for 500pcs, leading time in 25days after got receipt from bank
Introduction
The SAS816FHL-0¡Ks non-programmable room thermostat, apply to floor heating system, electrical heating system.
Application
This room thermostat is apply to Residential buildings, Light industrial buildings.
Features
Mini LCD display save energy,easy read room temperature
Big adjust knob is easy for old people and children operation
Optional economic operation or comfort operation
Optional detective sensor: Build in sensor or external floor sensor.
Optional temperature display of Celsius or Fahrenheit scale
Compressor delay option for cooling selection
Day/Night switch save energy.
Technical data
Voltage: 100~240VAC 50/60HZ
Relay contact: 250VAC, 5A (3A)
Room temperature setting range: 5¢J~30¢J (41¢K~86¢K)
Floor temperature setting range: 5¢J~ 40¢J
Accuracy: ¡Ó1¢J or ¡Ó1¢K???
Ambient temperature: 0~50¢Xc
Protective housing: IP21
Housing material: PC+ABS
Dimensions: 86mm¡Ñ86mm¡Ñ25mm wall mount.
Model Number: SAS816WHB-0 / SAS816WHL-0
Type: Water based radiant heating / boiler heating
Certification: CE logo: OEM or SASWELL color: white
Introduction
The SAS816WHB/SAS816WHL¡Kroom thermostat is apply to water based radiant heating,boiler heating /coolingsystem.
Application
This room thermostat is used in apply to Residential buildings.
Features
Battery back up ,and low Battery Indicator.
Room temperature easy read out by Mini LCD display ,without backlight save energy;
Big adjust knob is easy for older and children controlling; easy read setting temperature
Optional economic operation or comfort operation
Optional temperature display of Celsius or Fahrenheit scale
Compressor delay option for cooling selection
Day/Night switch save energy.
Active output for valve actuator and passive output for boiler
Technical data
Voltage: 2AA alkaline batteries
Room temperature setting range: 5¢J~30¢J (41¢K~86¢K)
Accuracy: ¡Ó1¢J or ¡Ó1¢K??
Ambient temperature: 0~50¢Xc
Protective housing: IP21
Housing material: PC+ABS
Dimensions: 86mm¡Ñ86mm¡Ñ25mm wall mount
100pcs per carton.
carton:51cm*30cm*31cm .
Packaging Detail: 100pcs per carton. carton:51cm*30cm*31cm .
Delivery Detail: for 500pcs, leading time in 25days after got receipt from bank
Basic Info.
Model NO.: KI31
Control Type: Digital
Display Type: Blender
Material: Plastic/ Ceramic
Certification: CE/CQC/CB/UL/cUL/TUV
Usage: Temperauter Control
Type: Temperature Switch
Max Voltage: 250V
Max Current: 16A
Body Material: Bakelite or Ceramic
Temperature Characteristics: Normal Opened or Normal Colsed
Terminal Angle: Horizontal or Vertical
Terminal Type: 6.3mm or 4.8mm
Export Markets: Global
Additional Info.
Trademark: HX
Packing: Carton or According to Customers Requirements
Standard: customized
Origin: Dong Guan,Guang Dong ,China
HS Code: 9032100000
Production Capacity: 3000000 PCS Per Month
Product Description
Technical parameters:
Electrical parameters:
1)CQC, VDE, UL, cUL AC250V 50~60Hz 5A/10A/15A (Resistance load)
2)UL AC125V 50Hz 15A (Resistance load)
2. Action temperature range: -10~260Centigrade (Optional); Temperature accuracy: 10Centigrade
3. Recovery and action temperature difference: 8~100Centigrade (Optional)
4. Connection method: Insert the terminal 250# (bending angle: 0~90¡ã Optional); Insert the terminal 18(bending angle: 0~90¡ã Optional; Thickness: 0.5, 0.8mm optional)
5. Lifespan: ¡Ý 100, 000 times
6. Electrical strength: No spark or breakdown for 1min at AC 50Hz 1800V
7. Contact resistance: 50M
8. Insulation resistance: 100M
Junction method: Constant-closed: The contact point disconnects when temperature rises; And contact point connects when temperature falls;
Constant-opened: The contact point connects when temperature rises; And contact point disconnects when temperature falls.
10. Casing protective class: IP00
11. Grounding method: Connection is made between the metal casing of the temperature controller and the metal part of the grounding device.
12. Installation method: Installed for KI031 series: General moving ring, mini round moving ring, flat moving ring general aluminum cover with mounting hole, extra length aluminum cover with mounting hole
Office Equipment Snap-action Thermostat
Applications of KSD301 Thermostat
1. Water dispenser, Electric heater, Sandwich toasters, Dishwashers, Dryers, Disinfection cabinet, Microwave ovens, Electric coffee pot, Electric caldron, Refrigerator, Air conditioning gluing machine
2. Office equipment
3. The seat heaters.
1. 250V15A thermostat
2.Plastic body or ceramics body
3.Normal close or normal open
4. VDE TUV UL CE Certificate
fixation of the working temperaturing
reliable snap action
perdurable
less radio interference
Technical parameters:
Electrical parameters: 1)CQC,VDE,UL,CUL AC250V 50~60Hz 5A/10A/15A (Resistance load)
2)UL AC125V 50Hz 15A (Resistance load)
2.Action temperature range: 45~160 (Optional); temperature accuracy:
3.Recovery and action temperature difference: 8~100 (Optional)
4.Connection method: Insert the terminal 250# (bending angle: 0~90deg optional); Insert the terminal 187# (bending angle: 0~90deg optional; thickness: 0.5, 0.8mm optional)
5.Lifespan: over100,000 times
6.Electrical strength: No spark or breakdown for 1min at AC 50Hz 1800V
7.Contact resistance: less than 50m
8.Insulation resistance: less than100M
Junction method: Constant-closed: the contact point disconnects when temperature rises; and contact point connects when temperature falls;
Constant-opened: the contact point connects when temperature rises; and contact point disconnects when temperature falls.
10.Casing protective class: IP00
11.Grounding method: Connection is made between the metal casing of the temperature controller and the metal part of the grounding device.
12.Installation method: installed for KI031 series: general moving ring, mini round moving ring, flat moving ring general aluminum cover with mounting hole, extra length aluminum cover with mounting hole
Structure and application:
KI-32 serial products are the temperature controllers taking bimetallic strip as the temperature-sensing unit. In case of normal operation the electrical appliance, the bimetallic strip is in a free state; the contact point is in a state of close/open. When the temperature reaches the action temperature, the bimetallic strip performs quick action generates caused by internal stress due to heating; open/close the contact point; disconnect/connect the circuit; thus, the temperature is in control. When the electrical appliance is cooled to the recovery temperature, the contact point automatically opens/closes to recover normal operation state.
Widely used in electrical heating appliances like water dispenser, water heater, sandwich bread baker, dishwasher, dryer, sterilizing cupboard, micro-wave oven, electric heating coffee pot, electric cooker, refrigeratory, air-conditioner, laminator, heater of auto seat.
Characteristics:
Stable performance, high accuracy, small size, lightweight, high reliability, long lifespan, less interference to radio
Precautions:
1.When adopting contact temperature sensing installation, the surface of the metal cover is required to be securely contacted with the installing surface of the controlled device. For ensuring the temperature sensing effect, it is required to coat thermal conductive grease or other similar thermal conductive medium on the surface of temperature sensor.
2.For reliable performance, collapse, loose or distorted top part of the cover is prohibited during installation.
3.Liquid inleakage into the controller, crackle in the casing and unauthorized change of external terminal position are prohibited.
4.When the product is used in the circuit with maximum current of 5A, the cable with copper core at section 0. 5-1mm2 is required for connection; When the product is used in the circuit with maximum current of 10A, the cable with copper core at section 0.75-1.5 mm2 is required for connection;
5.The product should be kept in a clean, dry and corrosive gas-free warehouse with good ventilation and at relative humidity below 90%, environment temperature below 40.
Passed certifications :CQC UL VDE TUV SGS.
Thermostat
Detailed screw type bimetal thermostat description
1:auto rest
2:cremis shell
3.6.3*0.8 terminal
4:CQC UL VDE TUV SGS
Detailed brass screw bimetal thermostat description
fixation of the working temperaturing
reliable snap action
perdurable
less radio interference
Technical parameters:
Electrical parameters: 1)CQC,VDE,UL,CUL AC250V 50~60Hz 5A/10A/15A (Resistance load)
2)UL AC125V 50Hz 15A (Resistance load)
2.Action temperature range: 45~160 (Optional); temperature accuracy:
3.Recovery and action temperature difference: 8~100 (Optional)
4.Connection method: Insert the terminal 250 bending angle: 0~90deg optional); Insert the terminal 187(bending angle: 0~90deg optional; thickness: 0.5, 0.8mm optional)
5.Lifespan: over100,000 times
6.Electrical strength: No spark or breakdown for 1min at AC 50Hz 1800V
7.Contact resistance: less than 50m
8.Insulation resistance: less than100M
Junction method: Constant-closed: the contact point disconnects when temperature rises; and contact point connects when temperature falls
Constant-opened: the contact point connects when temperature rises; and contact point disconnects when temperature falls.
10.Casing protective class: IP00
11.Grounding method: Connection is made between the metal casing of the temperature controller and the metal part of the grounding device.
12.Installation method: installed for KI031 series: general moving ring, mini round moving ring, flat moving ring general aluminum cover with mounting hole, extra length aluminum cover with mounting hole
Structure and application:
KI-32 serial products are the temperature controllers taking bimetallic strip as the temperature-sensing unit. In case of normal operation the electrical appliance, the bimetallic strip is in a free state; the contact point is in a state of close/open. When the temperature reaches the action temperature, the bimetallic strip performs quick action generates caused by internal stress due to heating; open/close the contact point; disconnect/connect the circuit; thus, the temperature is in control. When the electrical appliance is cooled to the recovery temperature, the contact point automatically opens/closes to recover normal operation state.
Widely used in electrical heating appliances like water dispenser, water heater, sandwich bread baker, dishwasher, dryer, sterilizing cupboard, micro-wave oven, electric heating coffee pot, electric cooker, refrigeratory, air-conditioner, laminator, heater of auto seat.
Characteristics:
Stable performance, high accuracy, small size, lightweight, high reliability, long lifespan, less interference to radio
Precautions:
1.When adopting contact temperature sensing installation, the surface of the metal cover is required to be securely contacted with the installing surface of the controlled device. For ensuring the temperature sensing effect, it is required to coat thermal conductive grease or other similar thermal conductive medium on the surface of temperature sensor.
2.For reliable performance, collapse, loose or distorted top part of the cover is prohibited during installation.
3.Liquid inleakage into the controller, crackle in the casing and unauthorized change of external terminal position are prohibited.
4.When the product is used in the circuit with maximum current of 5A, the cable with copper core at section 0. 5-1mm2 is required for connection; When the product is used in the circuit with maximum current of 10A, the cable with copper core at section 0.75-1.5 mm2 is required for connection;
5.The product should be kept in a clean, dry and corrosive gas-free warehouse with good ventilation and at relative humidity below 90%, environment temperature below 40.
Passed certifications :CQC UL VDE TUV SGS.
coil MCSC-J-230-A-G0-0-00-10
YOYIK is a research and development, production, sales, import agents in one of the manufacturing and processing enterprises. Our company was established in 2004. For more than 21 years, our company's products are widely used in electric power, petroleum, chemical, environmental protection, refractory materials, metallurgy, fire fighting equipment, natural gas, electronics, nuclear industry and other fields. Our company is willing to work with colleagues from all walks of life at home and abroad wholeheartedly cooperation to create a better future! Deyang YOYIK power plant, steel spare parts are as follows:
#DF-coil MCSC-J-230-A-G0-0-00-10-DF
Rotation Speed Probe ZS-04-75-5000
lvdt in control system HL-6-50-15
Speed display unit HY-TACH
Thermostat Pinhole Lens YF-A18-2A-2-0
Turbine bolt electric heating rod ZJ-20-2
Magnetoresistive sensor CS-1 G-110-03-00
cost efficient electric heater 73B.606Z
Vacuum pressure transmitter ZS-â?¡
Bolt electric heating rod ZJ-17-3
LVDT transmitter XCBSQ-01/50-01-11
Axial Displacement Sensor WT0112-A50-B00-C01
oil tank site gauge 617279-SFQZQ2
Eddy Current Sensor PR6422/102-111
proximity sensor tachometer TM0180-A07-B00-C13-D10
Displacement sensor LVDT for GV C9231124
differential pressure measuring instrument HS75668
Embedded intermediate relay GZY-219/110V
LVDT Sensor TD-1N-100-15
LVDT A156.33.31.26
Eddy Current Sensor PR6422/102-141
Eddy Current Sensor PR6426/000-110
RTD sensor WRNR3-18 400*6000-3K-NiCr-Ni
miran linear position sensor TDZ-1E-03 0-200
Displacement Sensor LVDT 3000TDGN
Relay board DZ6B/3Z
LVDT Sensor K156.36.06.005
Including programming digital display instrument PMH101I AC0-5A AC220V
RTD (PT-100) 3 WIRE WZP-231B
low cost linear position sensor 5000TD
Displacement transmitter LTM-4-D3
BATTERY, BLACK POWER MODULE 701PBKKF
Thermal Expansion Sensor TD-2 0-50mmm
Position sensor 1000TDGN-30-01
rotational speed sensor types ZS-01 L=65
SENSOR SPEED (RPM) FOR TURBINE D-075-02-01
rotary hall effect sensor TD-1 760MM
coil MCSC-J-230-A-G0-0-00-10
The Apollo touch screen room thermostat is mainly applied the Heat pump, Gas Heating, Electric Heating, and so on systems.
Features:
24VAC or Battery Powered (2 x AAA)
Large Backlit LCD Touch Screen
Security Logic inc Key lock & Limit Control
7 day, 5+2 Day or Manual Operation
Programmable Fan Logic
Heat cool & Heat Pump Logic
Single & Multistage Control
Remote Sensor Inputs
Outside Sensor Inputs
Designed and built by Smart Temp Australia
Comprehensive 3 year Warranty RTB
Specifications:
Input Voltage (Hardwired) 20-30 VAC 50/60 Hz
Relay Rating 24 VAC @ 1 Amp Max Per Relay
Battery Power (2) AAA 1.5 V
Operating Temperature 0° C to 55° C
Operating Relative Humidity 0-95% (non-condensing)
Storage Temperature 0° C to 65° C
Size: 125" W x 85" H x 25" D (mm)
LCD Display Size 57 W x 99 H (mm)
Back Light White LED
Short-Cycle Delay Off or 4 minutes
Displayed Temperature Resolution 0.1° C
Set Point Range
Heating 5° C - 49° C
Cooling 6° C - 50° C
Heating and Cooling Limits Fully adjustable
Onboard Sensor NTC type 3 100K
Remote NTC type 3 10K
Warranty 3 years (RTB).
DTS-BG ultra-portable intelligent thermostatic oil bath is a high-precision automatic control temperature verification device, which has the characteristics of good temperature stability, uniform temperature field and high temperature control accuracy. Adopt fully enclosed compressor refrigeration system and intelligent PID adjustment to realize automatic temperature control. The bath is compact in structure, light in weight, easy to carry and durable. It is suitable for the on-site verification calibration of various types of industrial thermal resistance, low temperature thermocouples, armored thermocouples, working glass liquid thermometers, standard mercury thermometers, bimetal thermometers, pressure thermometers and other temperature sensors.
FEATURES AT A GLANCE
Compact dimensions
Intelligent touch screen control
Display temperature difference,fluctuation data
Automatic segment temperature control,rapid cooling heating overshoot;
Micro-circulation technology
Temperature curve display. ETC.
PRODUCT SPECIFICATIONS
Model
DTS-10BG/DTS-20BG/DTS-30BG/DTS-95BG/DTS-125BG/DTS-40BG
Temperature range
10 180-20 150 -30 150 -40 95 -40 125
Customized
20 180 -40 150 180
Control method
Touch screen
Display resolution
0.001
Temperature fluctuation
0.02 10minï 0
Temperature uniformity
0.02
Heating rate
6.5 11.5 min
Cooling rate
5 10 minï 20
Work area size
80 280 mm
Dimensions mm
500(L) 220(W) 600(H)
Working medium
Special medium
Anhydrous alcohol
Special medium
Remarks
Flange size can be customized according to customer needs
85 Thermostat 3H6 01030 0 3H6010300M Suppliers
Short on time? Let Thermostat 3H6 01030 0 3H6010300M sellers contact you.
