Techwin 1.0μm Single Mode CW Fiber Lasers for Test and Measure
www.techwin-china.com
we try to supply fiber laser similar to keopsys fiber laser,NKT Photonics fiber laser,NP Photonics fiber laser,IPG Photonics fiber laser,BKtel Photonics fiber laser
Product Overview:
Techwin 1.0μm single-mode CW fiber lasers of are a highly integrated continuous Yb-doped fiber laser system with high power output. These fiber lasers employ integrated design of all fiber structure and use double cladding fiber pumping technology, thus realizing high performance output laser. The output power can be up to 20W and near diffraction-limited beam quality is achieved at the same time. They can be widely used in the areas of scientific research, experimental teaching and device testing.
Techwin 1.0μm single-mode CW fiber lasers employ the control system based on microprocessor which has stable property, long lifetime and free maintenance. With a clear interface and easy control, the LCD on the front panel can give a real-time display of the operating state of the output power and temperature. The LCD can also offer warning messages. Besides, in order to be convenient for system integration, Techwin can offer modularized package according to the user`s requirements.
Features:
â?¢ High output powerï¼?up to 50W
â?¢ Excellent beam quality
â?¢ High Stability and reliable performance
â?¢ Single-mode outputï¼?PM optional
Applications:
â?¢ Test and measure
â?¢ Scientific research
â?¢ Spectroscopy analysis
â?¢ Other lab applications
Techwin single-mode CW fiber lasers with high power output
www dot techwin-china dot com
We will try our best to provide products similar to keopsys fiber laserï¼? NKT Photonics fiber laserï¼?NP Photonics fiber laserï¼?IPG Photonics fiber laserï¼?BKtel Photonics fiber laser.
Techwin 1.0μm single-mode CW fiber lasers of are a highly integrated continuous Yb-doped fiber laser system with high power output. These fiber lasers employ integrated design of all fiber structure and use double cladding fiber pumping technology, thus realizing high performance output laser. The output power can be up to 20W and near diffraction-limited beam quality is achieved at the same time. They can be widely used in the areas of scientific research, experimental teaching and device testing.
Techwin 1.0μm single-mode CW fiber lasers employ the control system based on microprocessor which has stable property, long lifetime and free maintenance. With a clear interface and easy control, the LCD on the front panel can give a real-time display of the operating state of the output power and temperature. The LCD can also offer warning messages. Besides, in order to be convenient for system integration, Techwin can offer modularized package according to the user`s requirements.
Automatic single-sided saw bone meat machine with 1pcs saw blade, automatic bone meat cutting machine
Main features :
1.You can choose to use a single saw or a double saw for product stability,
or a single saw for unstable products .
2.Ensure the hygiene of the meat and ensure a smooth cutting surface
3.Waterproof design for quick cleaning
4.According to dfferent uses ,froze meat ,lamb chops, steak ,fish
5.Adopting human-machine interface and intelligent operation panel
6.30 sets of memory functions can be set
7.Feeding adopts servo motor ,with high precision
8.The conveyor belt can be removed for cleaning paramters :
cutting thickness: 1-50mm, Material thickness under 15cm .Capacity 8-15times/min
Paramters:
Machine size : 1350x2170x1700mm
Workbench size: 650x800
Food height for card loading (mm): 150
Dimensional accuracy (mm): 0.1
Cut thickness (mm): 80
The highest saw blade movement (m/s): 34
Saw blade specification (mm): 3084x16x0.56
Motor power (Kw): 3.5
Voltage: 380V/50HZ
Weight: 1100KG
Pressure increase (MPa): 0.4
Air volume requirement (L/min): 10
Cut back (times/minute): 10
Techwin CW fiber laser for science research
www dot techwin-china dot com
We will try our best to provide products similar to keopsys fiber laser, NKT Photonics fiber laser, NP Photonics fiber laser, PG Photonics fiber laser, BKtel Photonics fiber laser.
Techwin CW fiber lasers Product Description:
Techwin 1.5μm CW fiber lasers are eye-safe high power fiber lasers. These fiber lasers employ integrated design of all fiber structure and use double cladding fiber pumping technology, thus realizing high performance output laser. The output power can be up to 10W and near diffraction-limited beam quality is achieved at the same time. They can be widely used in the areas of scientific research, experimental teaching and device testing.
Techwin 1.5μm CW fiber lasers employ the control system based on microprocessor which has stable property, long lifetime and free maintenance. With a clear interface and easy control, the LCD on the front panel can give a real-time display of the operating state of the output power and temperature. The LCD can also offer warning messages. Besides, in order to be convenient for system integration, our company can offer modularized encapsulation according to the user`s requirements.
Application of Techwin single-mode fiber laser:
â?¢ Fiber optical communication
â?¢ Free-space communication
â?¢ Fiber optical sensing
â?¢ Test and measure
â?¢ Science research
Techwin single-mode fiber lasers Feature:
â?¢ High output powerï¼?up to 10W
â?¢ excellent beam quality
â?¢ high Stability and reliable performance
â?¢ All-fiber structure
â?¢ Single-mode outputï¼?PM optional
Raw coconut fiber is twisted into single or double yarns (two twisted fibers), then woven by loom into coir nets based on
specifications required by customers. Coir nets is mainly used to cover bare hills, road slopes and preventing erosion.
The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D.
Equipment Technical Data
Titer Range dtex 6.67-16.67
Spinning Pos. nos. 6-24
Spinning Pitch mm 700, 750
Plant Capacity TPD 15-80
Spinneret dia. mm 328, 358, 410
Spinning Mechanical Speed m/min 500-1,500
Spinning Processing Speed m/min 500-1,300
Stretching Mechanical Speed m/min 240
Stretching Processing Speed m/min 230
Total Tow Titer at Stretching dtex 600,000-3,000,000
Stuffer Box Width mm 160-410
Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101
Bale Weight kg 200-350
Application:
Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well.
Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press
Packaging Type PP Bags
Moisture (%) 12% Maximum
Calcium 1 % Minimum
Crude Fiber 14 % Maximum
Crude Protein 18 % Minimum
Net Weight 39 Kgs When Packed
Product Branding HAF
Ingredient Profile 100% Vegetarian
Form Granule
Grade Standard Feed Grade
Crude Fat 5 % Minimum
Product Form Coarse Mash Form / Pellet Form
In order to carve the higher position in this domain, we offer a wide range of Meat Goat Feed to our valued patrons. Our product range has high purity and effectiveness. Apart from this, these products are available in varied packaging to suit the needs of our customers.
Item Code: G-160518
Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,Western Union
Port of Dispatch: Mundra Port, Gujarat
Production Capacity: 450 MT per Day
Delivery Time: As per Mutual Agreement
Packaging Details: 39 Kgs PP Packing
Requirements for angora (and other long hair rabbits) are very similar to the requirements for adult short haired bunnies. However, constantly growing long fluffy hair requires more energy and protein than growing a normal rabbit coat. Average daily intake of an adult angora rabbit is 1 to 1.5 ounces of food for every pound of body weight.
Product Pricing
On Unit Basis (for each 39 Kgs Packing)
Production Capacity per Day
450 MT/Day
Factory Visit
Not Permissible
Fumigation
Aluminum Phosphide or Methyl Bromide (or any as per buyer specification)
Clinical Test Methodology
As per IS:2052 Proximate Analysis on Dry Matter Basis
BASIC INFORMATIONFor
DOMESTIC BUYERS
Outer Packing
Poly Propylene (Milky White)
Price Offer
On Ex- Factory Basis
Mode of Payment
100% Advance Through Bank
Cash/ Cheque/ RTGS/NEFT
For Inter State Transaction
VAT Number is Must
Tax Applications
NIL
Truck Loading
17 MT: 440 Bags | 21 MT: 540 Bags
25 MT: 645 Bags | 28 MT: 720 Bags
Minimum Order Quantity
As per Buyer Requirement & Material Availability with us.
Buyer Branding Offer
Yes, for Bulk Orders Only. Buyer has to arrange for Packing Material
BASIC INFORMATION
OVERSEAS BUYERS
Inner Packing
Low Density Polyethylene Bags of 75 Micron
Outer Packing
Poly Propylene (Milky White)
Price Offer
On CIF Destination Port Basis or Delivery basis to Nearest Transit Port
Mode of Payment
100% Wire Transfer Only, we dont accept L/c or SBLC of any nature.
Terms of Trade
Mutually Agreeable Basis
Cargo Stuffing in 20 FCL
600 Bags of 39 Kgs
Total Load Stuffing
23.4 MT in 20 FCL
Minimum Order Quantity
600 Bags or One 20 FCL
Buyer Branding Offer
Yes, when MOQ = 3000 Bags or Five 20 FCL
Nearest Transit Ports
Kandla Port, Adani Port and Pipavav Port
Buyer Specific Packing Offered
Yes, when MOQ = 3000 Bags or Five 20 FCL
Our Standard Shipping Document
Phytosanitary Certification
Fumigation Certificate
Food Hygiene Certificate from Veterinary Department India
Hindustan Animal Feeds is a leading Rabbit Feed Manufacturer, Rabbit Feed Exporter, Rabbit Feed Supplier, Rabbit Feed Distributor, Rabbit Feed Vendor, Rabbit Feed Company and Rabbit Feed Producer located in Jamnagar District of Gujarat. Our widest and high precision product range defines us renowned Rabbit Feed Manufa
Jute sacks made of 100% jute materials .Jute gunny sack bags are popular and environmental friendly
packaging solution for agricultural industry. Jute sacking / sack bag / gunny bags are also known as jute
hydro carbon bag which is specially made from 100% jute materials and these bags are high standard jute
bag use for various types of packaging.
Features:
1) Material: 100% jute fiber
2) Size: customized
3) Usage: packing,decor,wedding.
4) Logo: customized
5) Length: 100 M / Roll or customized
6) High quality, reasonable price and fast delivery
7) OEM is welcome.
multi-function application:
this product has complete specifications and supports customization. widely used in packing, storage, shipping
Jute sacks made of 100% jute materials .Jute gunny sack bags are popular and environmental friendly
packaging solution for agricultural industry. Jute sacking / sack bag / gunny bags are also known as jute
hydro carbon bag which is specially made from 100% jute materials and these bags are high standard jute
bag use for various types of packaging.
Features:
1) Material: 100% jute fiber
2) Size: customized
3) Usage: packing,decor,wedding.
4) Logo: customized
5) Length: 100 M / Roll or customized
6) High quality, reasonable price and fast delivery
7) OEM is welcome.
multi-function application:
this product has complete specifications and supports customization. widely used in packing, storage, shipping
Firefighter protective Clothing: 2019 models:
Clothing outer fabric: The use of 210g arylon three anti-fabric, which not only has a permanent flame retardant, high temperature resistance, acid and alkali resistance and other properties, and its strong performance is very excellent, with high heat insulation, permanent flame retardant, high strength, anti-cutting, acid and alkali resistance, arc resistance and other characteristics, improve the overall protection performance of clothing, clothing overall main technical parameters are much higher than the industry standard and bidding technical requirements. The fire retardant performance of the firefighter\'s fire extinguishing suit: the warp and weft continuous burning time is 0s, the warp and weft damage length is less than 51mm; Breaking strength: longitude and latitude 1000N; Tear strength: longitude and latitude 120N; Moisture resistance 3, thermal stability: change rate 1.0%; Color fastness: Color resistance 4, water friction resistance 4.
Waterproof breathable heat insulation layer: aramid non-woven fabric and flame retardant PTFE film, gram weight 180g/m2. It can not only prevent the infiltration of water and other general liquid chemicals, but also discharge a large amount of hot gas generated in the body during fire rescue in time. The fabric has hydrostatic pressure & 50kPa, moisture permeability 5439g/m2/24h, oil-repellent performance 3, and thermal shrinkage 1%.
Comfort layer: The use of intermediate arylon fiber and flame retardant viscose fiber blended, gram weight 125g/m2, flame retardant performance, thermal stability and other properties are very good.
Passion Fruit Is Highly Nutritious
Passion fruit is a good source of nutrients, especially fiber, vitamin C and vitamin A.
A single purple passion fruit of about 18 grams contains (1):
Calories: 17
Fiber: 2 grams
Vitamin C: 9% of the RDI
Vitamin A: 8% of the RDI
Iron: 2% of the RDI
Potassium: 2% of the RDI
This may not seem like much, but these are the values for a single, small fruit that contains only 17 calories. Calorie for calorie, it's a good source of fiber, vitamin C and vitamin A.
It's also rich in beneficial plant compounds, including carotenoids and polyphenols.
In fact, one analysis found that passion fruit was richer in polyphenols than many other tropical fruits, including banana, lychee, mango, papaya and pineapple (2).
Additionally, passion fruit contains a small amount of iron.
Your body doesn't usually absorb iron from plants very well. However, the iron in passion fruit comes with a lot of vitamin C, which is known to enhance iron's absorption
1. Lightweight,energy-saving and maintenance-free Integrated air-cooled structure. Volume only 0.15m�³.
2. 6 preset cleaning processes+ 3 custom ones Corresponding to different usage requirements. Simple operation.
3. Double-wobble Cleaning Head Scanning width up to 190mm.
4. 8 Light Modes Meet various operation requirements.
5. High Power Density and Strong Output.Energy is twice that of ordinary models, effectively addresses issues of difficult cleaning and inefficiency.
Essential details
Place of Origin:
Austria
Brand Name:
Cheapest Kiln Dried Quality Firewood
Firewood:
100% Dried Firewood
Product name:
Kiln Dried Mixed Firewood
Supply Ability
Supply Ability
80000 Ton/Tons per Month
Packaging & delivery
Packaging Details
bulk packing
Port
Austria
Contents: Kiln-Dried Oak, Beech, Ash, Hornbeam, Birch, Acacia, Birch
Volume: Approx. 2000 litre
Weight: Approx. 840-880kg
Moisture Content: Under 10% to 15%
Burning Characteristics: Excellent heat with bright flame and beautiful aesthetics
Single Crate of Dried Oak, Beech, Ash, Hornbeam, Birch
Kiln-Dried Birch
Volume: Approx. 1000 litre
Weight: Approx. 420-440 kg
Moisture Content: Under 10% to 15%
Burning Characteristics: Excellent heat with bright flame and beautiful aesthetics
Kiln-Dried Logs
Content: Kiln-Dried Oak, Beech, Ash, Hornbeam, Birch
Volume: Approx. 40 litres
Weight: Approx. 15kg
Moisture Content: 12% to 18% Maximum
Burning Characteristics: Excellent, clean, consistent and convenient
Specifications of split firewood:
Length - 25-45 cm
Log diameter â?? 8-16 cm
Humidity - dry (15-25%) or fresh.
Package: wooden box (container) of 1 m?, 1, 8 m? or 2 m?.
40 L bag contains 14-15 kg of dry firewood.
1 box contains 60 bags (40 L) of any kind of firewood.
Kindling sticks available.
Minimum order - 1 truckload.
Production capacity is 10.000 m? of firewood yearly.
Main export markets: Scandinavia, UK, Eastern Europe, EU, North Africa & Parts of Asia.
1, low moisture ,ash and sulfur
2, 100% made by pine saw dust with high heating value
3, long burning time, high energy content
4, Minimum carbon dioxide, ensure fresh environment.
5, After burned, ash can be used as fertilizer, not harmful to environment.
We have in bulk quantity the following woods and charcoal for hookah shisha and BBQ.
pine wood pellet , oak wood pellet
wood pellet fuel
wood briquettes
wood pellet Din Plus
Wood Pellet
Sunflower Husk Pellet
Rice Husk Pellet
Mangrove Charcoal
Coconut shell Charcoal
Shisha Charcoal
Lump Charcoal
Lemon and orange charcoal
coconut charcoal briquettes
sawdust charcoal briquettes
oak charcoal
Hardwood Charcoal
cuban charcoal
Palm kernel Charcoal
Kiln Dried Split Firewood
Dried Split Firewood
Firewood
Beech and Oak Firewood on pallets
birch Firewood
Fresh Firewood
Firewood on Crates
We do supply in large scales all types of biomass and We also sale charcoals like mangrove,coconut
shell,lemon,lump,oak and others .
Quality wood pellets from oak, spruce , pine and beech woods
Specification
high quality wood pellets for industrial power and home heatings
quality : din+ quality
materials :pure pine wood
moisture : 8%max
calorie :4200-4800 mj/kg
ash :0.5% -0.6%max
shape :stick
color :light yellow/brown
diameter : 6mm
length : 15mm-30mm
inner density :1100-1300kg/m3 min
bulk density : 792kg/m3 min
package :15kg plasctic bags or big bag.
Fabric : Cotton
Design : Printed
Neck : Round
Color : Multicolor
Size : Large
Sleeves Type : Full Sleeves
Occasion : Casual Wear
Brand : S Creation
Gender : Men
Is It Washable : Yes
Country of Origin : Made in India
Style - Men's Round Neck T -Shirt With Logo ON CHEST & Print Stripes with Cut & Sew
Fabric - 100% Combed Cotton Single jersey
Gsm- 180
Combo - 6
Size - M,L,XL,XXL
Ratio - 1 2 2 1
Moq - 70 pc
All goods are in single pcs packed
V3 Borewell Submersible Pumpset
Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410.
Salient Features
- Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.
Specification
- Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP)
- Version : Single Phase 160V to 230V, 50Hz, AC Supply
- Speed : 2880 RPM
- Head Range : 14 Mtr. to 96 Mtr.
- Discharge Range : 70 LPM to 15 LPM
- Outlet Size in Inch : 1.25"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
V6 Borewell Submersible Pumpset
Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure.
Salient Features
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series
- 60 feet head per stage in radial flow series
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial
thrust loads.
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Additional intermediate bearing in higher stage pumps
- Fully SS pump set are available in SS - 304 Grade
Specification
- Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V,
50Hz AC Supply.
- Speed : 2900 RPM
- Head Range : 12 Mtr. To 600 Mtr.
- Discharge Range : 1080 LPM to 170 LPM
- Outlet Size in Inch : 2.0, 2.5 , & 3.0
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct
Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.)
6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Falcon Premium 150 mm (6) Borewell Submersible Pumpsets are powered by water filled, rewindable submersible Motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated Copper winding wires and made up of low watt loss silicon steel laminations assembled under
pressure.
Salient Features
- SS 304 Grade Investment Casting Bowl and SS-304 Grade Impeller in radial flow series
- 60 feet head per stage in radial flow series
- Specially designed high performance thrust bearing (SS-420 Tilting Pad with Carbon plate) to with stand axial thrust loads.
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Extremely hardwearing water lubricated bearing
- Specially designed Deep Drawn type pump ensures perfect
alignment and Thereby increases the life of the pumpset
- Designed for wide voltage operation
- Additional intermediate bearing in higher stage pumps
- Fully SS pump set are available in SS - 304 Grade
Specification
- Power Range : 2.2 kW to 30 kW (3.0 HP to 40 HP)
- Version : Single Phase 180V to 230V, Three Phase 350 to 415V,
50Hz AC Supply.
- Speed : 2900 RPM
- Head Range : 12 Mtr. To 600 Mtr.
- Discharge Range : 1080 LPM to 170 LPM
- Outlet Size in Inch : 2.0, 2.5 , & 3.0
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Electrically Reversible -3ph
- Thrust Load : 2.2 kW 4.5 kW - 3500 lbs, 5.5 kW - 30 kW - 6000 lbs
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor Start Capacitor Run (CSCR) upto 2.2kW: 3ph -Direct
Online (D.O.L) upto 5.5 kW, Star Delta (SD) upto 30 kW
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
4107 Techwin 1 0μM Single Mode Cw Fiber Lasers Suppliers
Short on time? Let Techwin 1 0μM Single Mode Cw Fiber Lasers sellers contact you.
