Tci tricone bit(high toughness and durability suitable for different rock formation)
Main features
1. Cutting structure of this type sealed and non-sealed tci tricone bits :
The wear-resistance of teeth is enhanced with premium tungsten carbide hard facing on the tooth surfaces for steel tooth bit.
2. Gauge structure of this type tci tricone rock bits:
Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hard facing on the shirttail increases gauge holding capability and bearing life.
3. Bearing structure of this type tci tricone rock bits :
High precision roller bearing with two thrust faces. Ball locks the cone. Thrust faces hard face with wear resistant alloy. Abrasion resistance and seizure resistance of the bearing are improved.
Tci tricone bit(high toughness and durability suitable for different rock formation)
Main features
1. Cutting structure of this type sealed and non-sealed tci tricone bits :
The wear-resistance of teeth is enhanced with premium tungsten carbide hard facing on the tooth surfaces for steel tooth bit.
2. Gauge structure of this type tci tricone rock bits:
Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inserts and hard facing on the shirttail increases gauge holding capability and bearing life.
3. Bearing structure of this type tci tricone rock bits :
High precision roller bearing with two thrust faces. Ball locks the cone. Thrust faces hard face with wear resistant alloy. Abrasion resistance and seizure resistance of the bearing are improved.
The durability of premiun Tungsten carbide inserts is improved with new formulas and new techniques
2.Gauge Structure
Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inders and hardfacing on the shirttail increases gauge holding capacity and bearing life.
3.Bearing Structure
High Precision jourmal bearing with two thrust faces. Balls lock the cone. hardfaced head bearing surface. cone bearing inlaid with friction-reduceing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved,and suitable for high rotary speed.
4.Seal and Lubracation
Advance metal face seal lowers seal frictional force and overall seal torque and improves seal life. the pressure compensator syste, and advanced grease can greatly increas the lubracating relaibility.
5.Six-Point Position stabilzation Structure
The bit leg is designed with specific interated stability structure, which provides near six-point contact with borehole wall for the bie. this new feature gives the bit unequaled stability which greatly reduces bit vibration protects the cutting structure from damageding blows and keeps good borehole quality, the thickened nozzle wall can protecy hydraulic system from wear and fluid erosion.
6. Product Application
It is suitable for downhole motor and high speed applications, and is the ideal selection for drilling directional and horizontal wells.
Size
311.1mm
Iadc
537
Bearing type
Sealed bearing
Thread connection
6 5/8"reg pin
Wob(kn/mm)
0.35~1.05
Rpm(r/min)
80~40
Make up toqure(kn.M)
16.300~21.700
Weight(kgs/pc)
105
Color
Customized
Packing
Plywood box(free-fumigation)
Industrial standard
Sy/t5164
Moq
1 pc
Payment terms
T/t, western union, and l/c are acceptable
Applications
Medium soft with low compressive strength and harder abrasive stringers, such as hard shale, hard gypoltye, soft limestone, sandstone, and dolomite with strngers, etc.
Note:other size and iadc is avaiable
1.This type of bits are used in low press resistance soft to medium formation, shales, clay, salt, etc., it can work in a high rpm and low wob with fast drilling speed.
2. Surface of cones and teeth are hard enhanced to extend the working life of bit.
3. Teeth distributed optimal design largely improve the working efficiency of breaking down
s
7814 Tci Tooth Bit Suppliers
Short on time? Let Tci Tooth Bit sellers contact you.
Oral B tooth brush by P&G Indonesia.
Very competitive price till end of December 2017.
Other personal care from P&G are also available such as Gillette men care, Pantene Shampoo, Head n Shoulder Shampoo, etc
Tricone Bit, Steel Tooth Bit, TCI tricone Bit, Single Cone Bit, Rock drill Bits,Rotary Bits.
Application Petroleum & Gas ,Water well ,Mining and Tectonic Industries ,Oil field,
Construction, Geothermal, Directional Boring, and Underground Foundation work.
1) Condition: 100% new
2) Manufacturer brand name: GREAT
3) The bit size: 2 7/8" - 36"
4) IADC code: 111,115,117,127,137,217,417,517,537,617,637 etc.
5) Seal type: Rubber Sealed Bearing ,Metal Sealed Bearing.
6) Bearing type: Sealed Journal bearing ,Roller Bearing ,Air Bearing.
7) Nozzle quantity and nozzle size: 3 nozzles.
8) Connection joint Pin size: API 2-3/8"-7 5/8" Reg.
The 437 tci bits are used to drill low compressive strength very soft formation tci bits maximize
the use of both conical and chisel tungsten carbide inserts of large diameters and high projection.
This cutting structure design combined with maximum cone offset ,results in high bit penetration
rates.the deep intermesh of cutter rows prevents bit bailing in sticky formations.
TCI 517 medium formation TCI Tricone bits
The 517 features aggressive chisel tungsten carbide inserts on the heel rows and inner rows this
design provides a fast drilling rate and added cutting structure durability in medium to medium
hard formations the HSN rubber o-ring provides adequate sealing for bearing durability.
TCI 617
TCI tricone bits 617 features robust chisel tungsten carbide inserts on the heel row and conical
on the inner rows .this design provides a fast drilling rate and added cutting structure durability in
medium to medium hard formations . the HSN rubber o-rin provides adequate sealing for bearing durability .
TCI 637 can be used to drill hard and abrasive formations
wear –resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge.
maximum numbers of hemispherical-shaped inserts are used in all rows to provide cutter durability and long life.
Steel tooth bits series:
Soft formation tooth bits:
The soft formations tooth bits are used to drill low compressive strength, soft formations. Long projection
tooth lengths are used on high offset cones to provide the greatest penetrations rates possible. Wear
resistance hard facing is used to control tooth wear. On the softest bit types this hard facing completely
covers the bit teeth.
Medium hard formations tooth bits:
The medium hard formation tooth bits are used to drill high compressive strength, medium hard formations.
Shoot projection teeth with reduced crest length are used in this series of bit designs.
Durable hard facing is applied to reduce tooth wear.
Steel tooth bits series:
Soft formation tooth bits:
The soft formations tooth bits are used to drill low compressive strength, soft formations. Long projection
tooth lengths are used on high offset cones to provide the greatest penetrations rates possible. Wear
resistance hard facing is used to control tooth wear. On the softest bit types this hard facing completely
covers the bit teeth.
Medium hard formations tooth bits:
The medium hard formation tooth bits are used to drill high compressive strength, medium hard formations.
Shoot projection teeth with reduced crest length are used in this series of bit designs.
Durable hard facing is applied to reduce tooth wear.
9 be used for water well, oil field, underground, construction, geothermal, directional boring
114-117, 127
Soft Formation Tooth Bits
The 114-117 bits are used to drill low-compressive strength, soft formation. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. On the softest bits type this hard facing completely covers the bit teeth.
127
Medium-Hard Formation Tooth Bits
The 127 bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear.
437
Soft Formation TCI Tricone Bits
The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, result in high bit penetratione rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations.
517
Medium Formation TCI Tricone Bits
The 517 features aggressive chisel tungsten carbide insert on the heel rows and inter rows. This design provides a fast drilling rate and added cutting strcture durability in medium-to-medium hard for-mationes. The HSN rubber O-ring provides adequate sealing for bearing durability.
637
Hard Formation TCI Tricone Bits
The 637 bits can be used to drill hard and abrasive forma-tions. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-durability and long life.
617
Medium-Hard Formation TCI Tricone Bits
The 617 feature robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fest drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-rin provides adequate sealing for bearing durability.
9 be used for water well, oil field, underground, construction, geothermal, directional boring
114-117, 127
Soft Formation Tooth Bits
The 114-117 bits are used to drill low-compressive strength, soft formation. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. On the softest bits type this hard facing completely covers the bit teeth.
127
Medium-Hard Formation Tooth Bits
The 127 bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear.
437
Soft Formation TCI Tricone Bits
The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, result in high bit penetratione rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations.
517
Medium Formation TCI Tricone Bits
The 517 features aggressive chisel tungsten carbide insert on the heel rows and inter rows. This design provides a fast drilling rate and added cutting strcture durability in medium-to-medium hard for-mationes. The HSN rubber O-ring provides adequate sealing for bearing durability.
637
Hard Formation TCI Tricone Bits
The 637 bits can be used to drill hard and abrasive forma-tions. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-durability and long life.
617
Medium-Hard Formation TCI Tricone Bits
The 617 feature robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fest drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-rin provides adequate sealing for bearing durability.
1.Tighten the bits when screw on.
2.When the bit lower down to the bottom ,
Should give a soft pressure, slow drilling .After a drilling 0.2m-0.3m with appropriate pump, then give the conventional drilling.
3.Drilling could not be without water, if not fear the normal vibration sound or drill too slow, lift the drill to check without delay.
4.When drill jammed, withdraw first, should not to force the rig start.
5.Drill could not without water, to ensure that the bit will be too hot.
6.Use the bits in right order , big size first, then small one .
Oral B tooth brush by P&G Indonesia.
Very competitive price till end of December 2017.
Other personal care from P&G are also available such as Gillette men care, Pantene Shampoo, Head n Shoulder Shampoo, etc
We supply high quality drill pipes. These drill pipes are API 5D certified and dependable. The grades of our drill pipes include E, X-95, G-105, S-135. And X-95, G-105 and S-135 are high strength grades of drill pipes.
PDC Bit uses PDC as main cutting components, with the excellent wear-ability and impact toughness of the PDC. It has a long useful life, high-efficiency, and good performance cost ratio. PDC bit is mainly used for drilling soft and medium formation, it works under low drilling pressure, medium-low speed, big drainage. We can supply all kinds of PDC Core drill bits and non-core drill bits and they are widely used in the fields of geological exploration, coal mining, water conservancy and hydropower, construction of road and railway and provide reliable data support for drilling rock and coal of geology and engineering research. We can also design PDC bits according to customers' requirements, such as different geological condition, special strata and so on.
PDC (polycrystalline diamond compact) drill bit is produced with special high-frequency welding techniques and manufactured by welding PDC of high wear resistant Si to the steel body as cutting edges.
2.The Features of PDC Bits:
A: Super long life. The grinding/consumption ratio of PDC is 20-40 times that of tungsten carbide bit and 10 times that of diamond bit.
B: High drilling speed.
C: Can be operated with low pressure and low speed.
D: Has a good gage protection.
E: Can be used widely, more suitable for drilling in the stratum with formation< 7.
