Find Verified Tci Insert And Steel Tricone Drill Bit Suppliers, Manufacturers and Wholesalers

1.Cutting structure this type TCI tricone bits:
The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit.

2.Gauge structure this type TCI tricone bits:
Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.

3.Bearing structure of this type TCI tricone bits:
High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved.

4.Seal and Lubrication of this type TCI tricone bits:
Premium Oring, optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability .

5.Product Application this type TCI tricone bits:
It can receive high WOB in the conventional drilling. It is suitable for various formations by matching cutting structure with different tooth shape, tooth density and tooth exposure height.

6.Advantage:
1. High-strength, high flexibility, high temperature and high wear resistance.
2. High-precision metal seal.
3. Locking roller ball, to adapt to high-speed.
4. The use of high strength high toughness carbide teeth,
5. Hours in the rotary cone bit with the impact, crushing and shearing the role of broken rock.
6. Cone bit to adapt to the soft, medium and hard of various strata.
7. Reasonable price and long working life.

-

1.Tighten the bits when screw on.
2.When the bit lower down to the bottom ,
Should give a soft pressure, slow drilling .After a drilling 0.2m-0.3m with appropriate pump, then give the conventional drilling.
3.Drilling could not be without water, if not fear the normal vibration sound or drill too slow, lift the drill to check without delay.
4.When drill jammed, withdraw first, should not to force the rig start.
5.Drill could not without water, to ensure that the bit will be too hot.
6.Use the bits in right order , big size first, then small one .


30*35*40cm 45kg

1.Cutter Structure

The durability of premiun Tungsten carbide inserts is improved with new formulas and new techniques

2.Gauge Structure

Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inders and hardfacing on the shirttail increases gauge holding capacity and bearing life.

3.Bearing Structure

High Precision jourmal bearing with two thrust faces. Balls lock the cone. hardfaced head bearing surface. cone bearing inlaid with friction-reduceing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved,and suitable for high rotary speed.

4.Seal and Lubracation

Advance metal face seal lowers seal frictional force and overall seal torque and improves seal life. the pressure compensator syste, and advanced grease can greatly increas the lubracating relaibility.

5.Six-Point Position stabilzation Structure

The bit leg is designed with specific interated stability structure, which provides near six-point contact with borehole wall for the bie. this new feature gives the bit unequaled stability which greatly reduces bit vibration protects the cutting structure from damageding blows and keeps good borehole quality, the thickened nozzle wall can protecy hydraulic system from wear and fluid erosion.

6. Product Application

It is suitable for downhole motor and high speed applications, and is the ideal selection for drilling directional and horizontal wells.

TCI 437 Soft formation TCI Tricone bits

The 437 tci bits are used to drill low compressive strength very soft formation tci bits maximize
the use of both conical and chisel tungsten carbide inserts of large diameters and high projection.
This cutting structure design combined with maximum cone offset ,results in high bit penetration
rates.the deep intermesh of cutter rows prevents bit bailing in sticky formations.

TCI 517 medium formation TCI Tricone bits

The 517 features aggressive chisel tungsten carbide inserts on the heel rows and inner rows this
design provides a fast drilling rate and added cutting structure durability in medium to medium
hard formations the HSN rubber o-ring provides adequate sealing for bearing durability.

TCI 617
TCI tricone bits 617 features robust chisel tungsten carbide inserts on the heel row and conical
on the inner rows .this design provides a fast drilling rate and added cutting structure durability in
medium to medium hard formations . the HSN rubber o-rin provides adequate sealing for bearing durability .
TCI 637 can be used to drill hard and abrasive formations
wear –resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge.
maximum numbers of hemispherical-shaped inserts are used in all rows to provide cutter durability and long life.

API-7-1 Standard rock bit tricone bit TCI Tricone Bits inserted tooth

1.Cutting structure this type TCI tricone bits:
The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit.

2.Gauge structure this type TCI tricone bits:
Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.

3.Bearing structure of this type TCI tricone bits:
High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved.

4.Seal and Lubrication of this type TCI tricone bits:
Premium O-ring, optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability .

5.Product Application this type TCI tricone bits:
It can receive high WOB in the conventional drilling. It is suitable for various formations by matching cutting structure with different tooth shape, tooth density and tooth exposure height.

The SD1000 Full Hydraulic Core Drilling Rig is a robust piece of equipment designed for various drilling applications Lets dive into the details
Application Range The SD1000 crawler drill is primarily used for both diamond bit drilling and carbide bit drilling Its commonly employed in geological exploration mineral prospecting and core sampling
Specifications
Drilling Diameter 56 mm 71 mm 89 mm 114 mm 2 in 3 in 4 in 4 in
Drilling Depth 200 m 400 m 600 m 1000 m 65602 131204 196806 328010
Overall Length Working 5760 mm 227 in
Overall Width Working 2400 mm 94 in
Overall Height Working 9000 mm 354 in
Hole Range 65 89mm
Engine Power 156ps 115kw 2200rpm
Machine Weight 12400 kg 273373 lb
Motor Power 132 kW 17947 hp

TCI tricone rock bits:
1)Certified by ISO9001&API
2))Used for water well, oil field
3)IADC:114-117,127,437,517,617,637.

Circular steel pipe is both openings and have hollow concentric sections of steel larger than the surrounding. The specifications of steel pipes are indicated by appearance dimensions and inner diameter and wall thickness, with a wide range of dimensions from very small diameter capillary to large round steel pipe of several meters in diameter. Round steel pipes can be used for pipelines, thermal equipment, machinery industry, petroleum geological drilling, containers, chemical industry, and special uses. It can be divided into seamless, ERW, LSAW, SSAW steel pipe according to the production process.

Advantage:

1 TCI tricone bit, steel teeth tricone bit,rock bit,milled tooth bit,tci bit,steel tooth bit

2 Certified by ISO9001&API

3 Wide size code

4 Best price

5 Delivery on time

6 High quality and competitive price

7 rubber seal or metal seal

8 including drill rods,drill collar,rerun steel tooth bits, ,used drill bits stock,used mud pumps,etc

9 be used for water well, oil field, underground, construction, geothermal, directional boring



114-117, 127

Soft Formation Tooth Bits



The 114-117 bits are used to drill low-compressive strength, soft formation. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. On the softest bits type this hard facing completely covers the bit teeth.



127

Medium-Hard Formation Tooth Bits



The 127 bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear.



437

Soft Formation TCI Tricone Bits



The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, result in high bit penetratione rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations.



517

Medium Formation TCI Tricone Bits



The 517 features aggressive chisel tungsten carbide insert on the heel rows and inter rows. This design provides a fast drilling rate and added cutting strcture durability in medium-to-medium hard for-mationes. The HSN rubber O-ring provides adequate sealing for bearing durability.



637

Hard Formation TCI Tricone Bits



The 637 bits can be used to drill hard and abrasive forma-tions. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-durability and long life.



617

Medium-Hard Formation TCI Tricone Bits



The 617 feature robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fest drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-rin provides adequate sealing for bearing durability.

Advantage:

1 TCI tricone bit, steel teeth tricone bit,rock bit,milled tooth bit,tci bit,steel tooth bit

2 Certified by ISO9001&API

3 Wide size code

4 Best price

5 Delivery on time

6 High quality and competitive price

7 rubber seal or metal seal

8 including drill rods,drill collar,rerun steel tooth bits, ,used drill bits stock,used mud pumps,etc

9 be used for water well, oil field, underground, construction, geothermal, directional boring



114-117, 127

Soft Formation Tooth Bits



The 114-117 bits are used to drill low-compressive strength, soft formation. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hard facing is used to control tooth wear. On the softest bits type this hard facing completely covers the bit teeth.



127

Medium-Hard Formation Tooth Bits

The 127 bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear.



437

Soft Formation TCI Tricone Bits



The 437 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, result in high bit penetratione rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations.



517

Medium Formation TCI Tricone Bits



The 517 features aggressive chisel tungsten carbide insert on the heel rows and inter rows. This design provides a fast drilling rate and added cutting strcture durability in medium-to-medium hard for-mationes. The HSN rubber O-ring provides adequate sealing for bearing durability.



637

Hard Formation TCI Tricone Bits



The 637 bits can be used to drill hard and abrasive forma-tions. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-durability and long life.



617

Medium-Hard Formation TCI Tricone Bits



The 617 feature robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fest drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-rin provides adequate sealing for bearing durability.

1.Cutting structure this type TCI tricone bits:

The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit.



2.Gauge structure this type TCI tricone bits:

Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.



3.Bearing structure of this type TCI tricone bits:

High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved.



4.Seal and Lubrication of this type TCI tricone bits:

Premium Oring, optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability .



5.Product Application this type TCI tricone bits:

It can receive high WOB in the conventional drilling. It is suitable for various formations by matching cutting structure with different tooth shape, tooth density and tooth exposure height.



6.Advantage:

1. High-strength, high flexibility, high temperature and high wear resistance.
2. High-precision metal seal.
3. Locking roller ball, to adapt to high-speed.
4. The use of high strength high toughness carbide teeth,
5. Hours in the rotary cone bit with the impact, crushing and shearing the role of broken rock.

6. Cone bit to adapt to the soft, medium and hard of various strata.
7. Reasonable price and long working life.

Brief introduction
Size
12 1/4'' (311.1mm)
Iadc
517
Bearing type
Sealed bearing
Thread connection
6 5/8 reg pin
Wob(kn/mm)
0.35~1.05
Rpm(r/min)
120~50
Make up toqure(kn.M)
46.1~54.2
Weight(kgs/pc)
278
Color
Customized
Packing
Plywood box(free-fumigation)
Industrial standard
Sy/t5164
Moq
1 pc
Payment terms
T/t, western union, and l/c are acceptable
Applications
Soft with low compressive strength and high drillability, such as shale, clay, sandstone and soft limestone, etc.
Note:other size and iadc is avaiable

Model Number:417,517,617 ,437,537,637,117,217
Type: rock bit cutter
Material:Tungsten Carbide
Use: Well Drilling
Formation:soft to hard formation
Usage:Produce /replace hole opener cutters
Bearing type: journal bearing
Sealed type:metal sealing /Rubber seal
Teeth type: insert button or milled tooth,saw tooth
Name:Tci rock bit cutter

1.Brief introduction


Size
311.1mm
Iadc
537
Bearing type
Sealed bearing
Thread connection
6 5/8"reg pin
Wob(kn/mm)
0.35~1.05
Rpm(r/min)
80~40
Make up toqure(kn.M)
16.300~21.700
Weight(kgs/pc)
105
Color
Customized
Packing
Plywood box(free-fumigation)
Industrial standard
Sy/t5164
Moq
1 pc
Payment terms
T/t, western union, and l/c are acceptable
Applications
Medium soft with low compressive strength and harder abrasive stringers, such as hard shale, hard gypoltye, soft limestone, sandstone, and dolomite with strngers, etc.
Note:other size and iadc is avaiable







Weight 45kg

Tricone Bit, Steel Tooth Bit, TCI tricone Bit, Single Cone Bit, Rock drill Bits,Rotary Bits.

Application Petroleum & Gas ,Water well ,Mining and Tectonic Industries ,Oil field,
Construction, Geothermal, Directional Boring, and Underground Foundation work.

1) Condition: 100% new
2) Manufacturer brand name: GREAT
3) The bit size: 2 7/8" - 36"
4) IADC code: 111,115,117,127,137,217,417,517,537,617,637 etc.
5) Seal type: Rubber Sealed Bearing ,Metal Sealed Bearing.
6) Bearing type: Sealed Journal bearing ,Roller Bearing ,Air Bearing.
7) Nozzle quantity and nozzle size: 3 nozzles.
8) Connection joint Pin size: API 2-3/8"-7 5/8" Reg.

1.Cutting structure this type TCI tricone bits:
The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit.

2.Gauge structure this type TCI tricone bits:
Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.

3.Bearing structure of this type TCI tricone bits:
High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved.

4.Seal and Lubrication of this type TCI tricone bits:
Premium O-ring, optimal seal compression and curved seal structure can enhance the seal performance. The pressure compensator system and advanced grease can greatly increase the lubricating reliability .

5.Product Application this type TCI tricone bits:
It can receive high WOB in the conventional drilling. It is suitable for various formations by matching cutting structure with different tooth shape, tooth density and tooth exposure height.

1.Cutting structure this type tci tricone bits:
The durability of premium tungsten carbide insert is improved with new formulas and new techniques for insert bit.

2.Gauge structure this type tci tricone bits:
Multiple gauge protection with gauge trimmers on the heel of cone, tungsten carbide inserts and hardfacing on the shirttail increases gauge holding capability and bearing life.

3.Bearing structure of this type tci tricone bits:
High precision bearing with two thrust faces. Ball lock the cone. Hardfaced head bearing surface. Cone bearing inlaid with friction-reducing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved.

-

1.Cutter Structure
The durability of premiun Tungsten carbide inserts is improved with new formulas and new techniques
2.Gauge Structure
Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inders and hardfacing on the shirttail increases gauge holding capacity and bearing life.
3.Bearing Structure
High Precision jourmal bearing with two thrust faces. Balls lock the cone. hardfaced head bearing surface. cone bearing inlaid with friction-reduceing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved,and suitable for high rotary speed.
4.Seal and Lubracation
Advance metal face seal lowers seal frictional force and overall seal torque and improves seal life. the pressure compensator syste, and advanced grease can greatly increas the lubracating relaibility.
5.Six-Point Position stabilzation Structure
The bit leg is designed with specific interated stability structure, which provides near six-point contact with borehole wall for the bie. this new feature gives the bit unequaled stability which greatly reduces bit vibration protects the cutting structure from damageding blows and keeps good borehole quality, the thickened nozzle wall can protecy hydraulic system from wear and fluid erosion.
6. Product Application
It is suitable for downhole motor and high speed applications, and is the ideal selection for drilling directional and horizontal wells

1.Cutter Structure
The durability of premiun Tungsten carbide inserts is improved with new formulas and new techniques
2.Gauge Structure
Multiple gauge protection with gauge trimmers on the heel and gauge inserts on the gauge surface of the cone, tungsten carbide inders and hardfacing on the shirttail increases gauge holding capacity and bearing life.
3.Bearing Structure
High Precision jourmal bearing with two thrust faces. Balls lock the cone. hardfaced head bearing surface. cone bearing inlaid with friction-reduceing alloy and then silver-plated. Abrasion resistance and seizure resistance of the bearing are improved,and suitable for high rotary speed.
4.Seal and Lubracation
Advance metal face seal lowers seal frictional force and overall seal torque and improves seal life. the pressure compensator syste, and advanced grease can greatly increas the lubracating relaibility.
5.Six-Point Position stabilzation Structure
The bit leg is designed with specific interated stability structure, which provides near six-point contact with borehole wall for the bie. this new feature gives the bit unequaled stability which greatly reduces bit vibration protects the cutting structure from damageding blows and keeps good borehole quality, the thickened nozzle wall can protecy hydraulic system from wear and fluid erosion.
6. Product Application
It is suitable for downhole motor and high speed applications, and is the ideal selection for drilling directional and horizontal wells;