Pumps Motors
All of our products are renowned for their dependability and excellence However stainless steel is the only material that can endure the force of acid solvent seawater and other chemicals with equal effectiveness
Because of this you can be sure to get lasting goods from our wide selection of stainlesssteel submersible pumps These products will work flawlessly for the duration of their useful lives They are resistant to pitting and corrosion
Our submersible stainlesssteel pumps were created for draining as well as utility purposes These pumps have topnotch stainlesssteel casings installed It guarantees persistent and reliable functioning
uPVC Column Pipes
ARROW INTERNATIONAL pipes are high performance casing pipes and column pipes for bore well application It should be carefully designed to withstand high internal hydro static pressure exerted by pump and the tensile strength to carry the total weight of pumpset and water column as well The ARROW INTERNATIONAL pipes are carefully formulated and designed considering all safety factors which results in its effective performance and durability These pipes are produced in different sizes and types should be selected carefully according to the installation requirements
uPVC Casing Pipes
ARROW INTERNATIONAL pipes are high performance casing pipes and column pipes for bore well application It should be carefully designed to withstand high internal hydro static pressure exerted by pump and the tensile strength to carry the total weight of pumpset and water column as well The ARROW INTERNATIONAL pipes are carefully formulated and designed considering all safety factors which results in its effective performance and durability These pipes are produced in different sizes and types should be selected carefully according to the installation requirements
Small submersible sewage pump is a kind of sewage treatment equipment with pump and motor connected design, submerged under liquid work, widely used in municipal engineering, industrial wastewater treatment and building drainage field. The equipment adopts vertical structure, with compact structure, low noise characteristics, can be directly installed in the sewage pool operation.
Submersible sewage pumps are submersible sewage pumps that are particularly suitable for transferring liquids containing hard solids, fibrous materials, and particularly dirty, sticky and slippery liquids. There are two types: AS and AV submersible sewage pumps.
QW submersible sewage pump is a kind of pressure pump with large flow channel anti-clogging hydraulic parts design, which greatly improves the dirt passing ability.
Salient Features
Light weight and compact.
Non overloading power characteristics.
Flatter and higher efficiency curve, energy saving.
F class of insulation.
Lesser no. of stages of for given performance
Antifriction bearings for axial / radial loads.
Can be installed with HDPE / UPVC / GI pipes.
Potable and hygienic grade oil filled motor.
Casing, shaft, hardware of stainless steel.
Impeller and diffuser of engineering plastic.
31564 Submersible Pumps Suppliers
Short on time? Let Submersible Pumps sellers contact you.
Indoma Industries Pvt. Ltd. revolutionized the desert cooler industry by introducing a technological marvel- Littelpump back in 2002. Due to its numerous advantages, it made the vertical pump obsolete in no time. Littelpump uses PMT technology which ensures long life and relief from calling electrician to change the pump every year.
Material construction of motor
Part nameMaterial
ShaftSs 431 / ss 410
Bearing bushLeaded tin bronze
Thrust bearingS.S. / carbon / teflon
Lower/upper housingCast iron
Stator shellStainless steel (heavy duty)
Material construction of pump
Part nameMaterial
Impeller/diffuserNoryl gfn 2-701
Bearing bushLeaded tin bronze
Pump shaftS.S 202
Suction casing / nrvCast iron
Strainer / cable guardStainless steel
Operating limits
Power range0.5 h.P. To 1.5. H.P.
(150 /240 v, 50 hz. Single phase)
0.75 h.P. To 5.0 h.P.
(350 /415 v, 50 hz. Ac three phase)
Speed2850 rpm
Max. Discharge400 lpm
Min. Discharge15 lpm
Max. Head900 ft.
Per stage head20 ft.
Special features :
Lower power consumption
Long durability due to corrosive ss body
Special design to withstand wide voltage fluctuations.
Excellent performance even at low voltage
Special sand guard used to prevent ingress of solids or foreign particles.
Material Construction of Motor
Part NameMaterial
ShaftSS 431 / SS 410
Bearing BushLeaded Tin Bronze
Thrust BearingS.S. / Carbon
Lower/Upper HousingCast Iron
Stator ShellStainless Steel (Heavy Duty)
Material Construction of Pump
Part NameMaterial
Impeller/DiffuserSS 410 / Cast Iron
Bearing BushLeaded Tin Bronze
Pump ShaftS.S 202
Suction Casing / NRVCast Iron
Strainer / Cable GuardStainless Steel
Stage CasingCast Iron
Operating Limits
Power Range5.0 H.P.
(180 /240 V, 50 Hz. AC single phase)
5.0 to 10.0 H.P.
(350 /415 V, 50 Hz. AC Three phase)
Speed2850 RPM
Max. Discharge700 LPM
Min. Discharge300 LPM
Max. Head275 Ft.
Per stage Head33 Ft.
Special features :
Lower Power Consumption
Sand Fighter Model
Long durability due to complete SS Motor body
With stand with wide voltage fluctuation
Specially Designed for high discharge
Excellent performance even at low voltage
Material construction of motor
Part nameMaterial
ShaftSs 431 / ss 410
Bearing bushLeaded tin bronze
Thrust bearingS.S. / carbon
Lower/upper housingCast iron
Stator shellStainless steel (heavy duty)
Material construction of pump
Part nameMaterial
Impeller/diffuserSs 410 / cast iron
Bearing bushLeaded tin bronze
Pump shaftS.S 202
Suction casing / nrvCast iron
Strainer / cable guardStainless steel
Stage casingCast iron
Operating limits
Power range5.0 h.P. To 20.0 h.P.
(350 /415 v, 50 hz. Ac three phase)
Speed2850 rpm
Max. Discharge1250 lpm
Min. Discharge50 lpm
Max. Head1300 ft.
Per stage head(1) 50 ft. For k-type model / 45 ft. For q-type model
(2) 35 ft. For k-type model / 30 ft. For q-type model
Pecial features :
Low power consumption
Sand/mud proff design
Specially designed ss 304 grade bowl for high head & high discharge
Material Construction of Motor
Part NameMaterial
ShaftSS 431 / SS 410
Bearing BushLeaded Tin Bronze
Thrust BearingS.S. / Carbon
Lower/Upper HousingCast Iron
Stator ShellStainless Steel (Heavy Duty)
Material Construction of Pump
Part NameMaterial
Impeller/DiffuserSS 410 / S.S. 304
Bearing BushLeaded Tin Bronze
Pump ShaftS.S 202
Suction Casing / NRVCast Iron / S.S.
Strainer / Cable GuardStainless Steel
Stage CasingS.S. 304
Operating Limits
Power Range5.0 H.P. to 20.0 H.P.
(350 /415 V, 50 Hz. AC Three phase)
Speed2850 RPM
Max. Discharge1380 LPM
Min. Discharge55 LPM
Max. Head1200 Ft.
Per stage Head50 Ft. for K-type model / 45 ft. for Q-type model
Special features :
Energy Efficient Models
Long durability due to non corrosive SS body
Sand/mud proff design
Specially Designed SS 304 grade bowl for high head & high discharge
Excellent performance even at low voltage
Tex pump is a pump manufacturer for mining, construction, dredging and also a dredging serivce provider,
We also provide refurbished toyo pumps and spare parts for replacement,
We care every customer, the satisfaction from customer is always our best gift.
