Angle of impeller installation: from -6 deg. To +6 deg.
Ph value: 6-9
Operating limits:
Maximum ambient temperature 50¡ãc
Motor:
1. Rewindable, dry-type, whole sealing and three-phase asynchronous motor
2. Insulation grade: f
3. Protection grade: ip68
4. Double/triple mechanical sealing
5. Equipped with special control cabinet
6. Voltage: 380-10000v
7. Frequency: 50-60hz
Materials:
1. Pump body: cast iron
2. Impeller: stainless steel
3. Shaft with rotor: #45 steel
Application:
* applied to farm irrigation and drainage, and water supply and drainage for industrial and mine enterprise, dock, civil project and power station, etc.
Overview
QZ series submersible axial flow pump is a new generation of submersible axial flow pump products independently developed by our company,it is not only simple in structure,easy to disassemble and assemble,but also has excellent performance as an alternative to traditional axial flow pump.
This QZ series of products has a wide spectrum,good hydraulic performance and novel structure.it is characterized by high efficiency,good cavitation performance,easy installation and maintenance,at the same time,combined with the latest information control technology,the intelligent water pump system independently developed can be configured,with automatic monitoring function.
The design,manufacture,and quality of this series product meet the standard of GB/T13008 Technical conditions for mixed-flow pump and axial-flow pump JB/T Large and medium-sized submersible motor-pumps
Application
This series of products can be used for clear water or other liquids with physical and chemical properties close to water whose temperature of conveying medium is no more than 43â??. They are widely used in municipal engineering, large-scale water conservancy projects, farmland irrigation,industrial conveying water.The thermal power station car-ries circulating water.Shipyard level,urban water supply and drainage and water diversion projects
Working condition
The medium:clear water,rain water,river water,sewage waste water,any of various liquids whose physicochemical properties resemble those of water
Rated voltage:380V or 660V 3KV 6KV 10KV,etc
Medium temperature: 43
Starting mode : soft start or frequency conversion
Direction of rotation:from the drive end,the pump is rotated in clockwise
Product features
High-efficiency energy saving: the hydraulic model is designed by 3-D flow theory and calculated by CFD computational simulation,with the best performance in theory. Hydraulic components are made of metal mold,cast precisely guide blade mould is machined by CNC;guide blade shell and suction cone blank are cast by resin sand,solid flow channel is completely in accordance with design drawings,with efficiency higher, and wide high efficiency zone
High reliability:the design of the inlet flow channel is reasonable, the inlet water is uniform without vortex, with smooth running, the absolute concentricity o the pump shaft, and the excellent static balance of the rotor parts ensure that the pump has low vibration and low noise when running at high speed
Advanced technology:all parts using metal mold,precision casting,parts quality is reliable
Low maintenance: reasonable structure,convenient assembly and disassembly, and simple maintenance
Inventory management: reasonable inventory management,short lead time,fast delivery
Automatic monitoring: Equipped with intelligent water pump system independently developed,with automatic monitoring function
Overview
QZ series submersible axial flow pump is a new generation of submersible axial flow pump products independently developed by our company,it is not only simple in structure,easy to disassemble and assemble,but also has excellent performance as an alternative to traditional axial flow pump.
This QZ series of products has a wide spectrum,good hydraulic performance and novel structure.it is characterized by high efficiency,good cavitation performance,easy installation and maintenance,at the same time,combined with the latest information control technology,the intelligent water pump system independently developed can be configured,with automatic monitoring function.
The design,manufacture,and quality of this series product meet the standard of GB/T13008 Technical conditions for mixed-flow pump and axial-flow pump JB/T Large and medium-sized submersible motor-pumps
Application
This series of products can be used for clear water or other liquids with physical and chemical properties close to water whose temperature of conveying medium is no more than 43. They are widely used in municipal engineering, large-scale water conservancy projects, farmland irrigation,industrial conveying water.The thermal power station car-ries circulating water.Shipyard level,urban water supply and drainage and water diversion projects
Working condition
The medium:clear water,rain water,river water,sewage waste water,any of various liquids whose physicochemical properties resemble those of water
Rated voltage:380V or 660V 3KV 6KV 10KV,etc
Medium temperature: 43
Starting mode : soft start or frequency conversion
Direction of rotation:from the drive end,the pump is rotated in clockwise
Product features
High-efficiency energy saving: the hydraulic model is designed by 3-D flow theory and calculated by CFD computational simulation,with the best performance in theory. Hydraulic components are made of metal mold,cast precisely guide blade mould is machined by CNC;guide blade shell and suction cone blank are cast by resin sand,solid flow channel is completely in accordance with design drawings,with efficiency higher, and wide high efficiency zone
High reliability:the design of the inlet flow channel is reasonable, the inlet water is uniform without vortex, with smooth running, the absolute concentricity o the pump shaft, and the excellent static balance of the rotor parts ensure that the pump has low vibration and low noise when running at high speed
Advanced technology:all parts using metal mold,precision casting,parts quality is reliable
Low maintenance: reasonable structure,convenient assembly and disassembly, and simple maintenance
Inventory management: reasonable inventory management,short lead time,fast delivery
Automatic monitoring: Equipped with intelligent water pump system independently developed,with automatic monitoring function
Submersible borehole pump (deep well water pump)
Material is cast iron and stainless steel, tin bronze. They are important equipment for deep well water-lifting. Used to lifting water and drainage farmland irrigation, water supply projects, etc. It is also used sea water.
Products include 6 large series and over 800 sizes.
Size: 6 inch ~12 inch
Flow rate: 5~600m3/h
Lift: 6~600m
Power 3~250kw.
Wooden case.
47051 Submersible Axial Flow Pump Suppliers
Short on time? Let Submersible Axial Flow Pump sellers contact you.
The products are important water-lifting equipments in projects of geothermal development and utilization. They are heat-resistant, anti-corrosion and aging-resistant. Its operating water temperature is 120¡æ, and has passed national ministerial level certification. The case of the electric heat-resistant submersible motor is made from stainless steel and the tin bronze materials. Products include 6 large series and over 800 sizes. Geothermal submersible borehole electric pump honorably wins the prize of scientific and technological innovation. China important new products certificate
Size: 6 inch ~12 inch
Flow rate: 5~600m3/h
Lift: 6~600m
Power 3~250kw.
Sea water submersible pumps are high-performance, wear-resistant pumps which are produced by international advanced technology. Our products have no pollution to water environment by using advanced oil-filled or water-filled stainless steel motors. Our products are made of quality stainless steel shell, shaft, coupling and the new floating impeller has no axial pressure load to the motor. The water power pattern layout's impeller, raised the efficiency, saved the run cost. Electrical machinery and water pump vertical connection, therefore only need the small installment space. The built-in check valve, is loaded with the prevent returning valve in the pump upper extreme body, prevent water hammer impact. ge impellers series connestion
Application:
1. offshore platform fire-fighting,
2.thermal dissipation,
3.seawater desalinization, seawater lifting,
4.coastal square fountain,
5.mariculture and attemperation as ground source heat pump in coastal area.
Appropriate for pumping clear water or lightly contaminated water. Used to flood to flood control and drainage farmland irrigation, water supply projects, etc.
High Pressure Axial Flow Pump
Appropriate for pumping clear water or lightly contaminated water. Used to flood to flood control and drainage farmland irrigation, water supply projects, etc.
Flow: 500~25000m3/h
Lift: 0~12m
Power: 300~1000kW
Diameter: 1000~1800 mm.
Hydroman Submersible is axial and Mixed Flow Sewage Pump is specifically designed to pick up and transport abrasive materials with the least amount of water. The design incorporates the patented Tobee' s agitator, attached directly to the pump shaft, which together with the closed impeller or open impeller, large open passages for the easy passage of solids, heavy duty shaft/bearing configuration and custom built motor with 1.35 service factor, result in the most rugged submersible slurry pump on the market today. In applications where solids are especially difficult to pump, or simply where more agitation is required, Hydroman offers a special high pressure jet ring. This combination of jet ring and agitator has proven to be a truly effective 'agitation team', together pumping solid concentrations of up to 70% by weight.
Small submersible sewage pump is a kind of sewage treatment equipment with pump and motor connected design, submerged under liquid work, widely used in municipal engineering, industrial wastewater treatment and building drainage field. The equipment adopts vertical structure, with compact structure, low noise characteristics, can be directly installed in the sewage pool operation.
Submersible sewage pumps are submersible sewage pumps that are particularly suitable for transferring liquids containing hard solids, fibrous materials, and particularly dirty, sticky and slippery liquids. There are two types: AS and AV submersible sewage pumps.
QW submersible sewage pump is a kind of pressure pump with large flow channel anti-clogging hydraulic parts design, which greatly improves the dirt passing ability.
Pumps Motors
All of our products are renowned for their dependability and excellence However stainless steel is the only material that can endure the force of acid solvent seawater and other chemicals with equal effectiveness
Because of this you can be sure to get lasting goods from our wide selection of stainlesssteel submersible pumps These products will work flawlessly for the duration of their useful lives They are resistant to pitting and corrosion
Our submersible stainlesssteel pumps were created for draining as well as utility purposes These pumps have topnotch stainlesssteel casings installed It guarantees persistent and reliable functioning
uPVC Column Pipes
ARROW INTERNATIONAL pipes are high performance casing pipes and column pipes for bore well application It should be carefully designed to withstand high internal hydro static pressure exerted by pump and the tensile strength to carry the total weight of pumpset and water column as well The ARROW INTERNATIONAL pipes are carefully formulated and designed considering all safety factors which results in its effective performance and durability These pipes are produced in different sizes and types should be selected carefully according to the installation requirements
uPVC Casing Pipes
ARROW INTERNATIONAL pipes are high performance casing pipes and column pipes for bore well application It should be carefully designed to withstand high internal hydro static pressure exerted by pump and the tensile strength to carry the total weight of pumpset and water column as well The ARROW INTERNATIONAL pipes are carefully formulated and designed considering all safety factors which results in its effective performance and durability These pipes are produced in different sizes and types should be selected carefully according to the installation requirements
Material is cast iron and stainless steel, tin bronze. They are important equipment for deep well water-lifting. Used to lifting water and drainage farmland irrigation, water supply projects, etc. It is also used sea water.
Products include 6 large series and over 800 sizes.
Size: 6 inch ~12 inch
Flow rate: 5~600m3/h
Lift: 6~600m
Power 3~250kw.
Wooden case.
47051 Submersible Axial Flow Pump Suppliers
Short on time? Let Submersible Axial Flow Pump sellers contact you.
