Product Name:polyurethane screens
Material:polyurethane
Panel Size(WXL):1200x2400mm ; 355x3000mm; 534x3460mm ; 305x305mm; 305x604mm etc.
Thickness:25mm-60mm
Opening Size: 0.15mm-130mm
Usage:Industrial use like mining , sanding , quarry , coal washing etc.
Our Polyurethane Screen Advantages
1 high tensile strength imported polyuerthane material
2 High wear resistance has decided its long life time
3 Nice surface treatment as pic shown
4 Anti-pegging and anti-blinding due to its self relieving apertures
5 Easy installation and replacement
6 Suitable for all kinds of industrial medias, like wet or dry
Packing & Delivery Details
1 Packing :10 pcs into a wooden case (shown as below ) or customized
2 Delivery time: 7days for regular screens less than 50 pcs; 15 days for OEM screens less than 50pcs; 20-30days for screens over 50 pcs
3 Delivery methods: by sea , by air , by express like Fedex, DHL, TNT, UPS etc
About Us
>Established in 1985
>A well-equipped factory in Hebei, professional sales teams in Beijing
>About 50 staffs and 5 workshops , 30 casting machines in factory
> 1 year warranty , within this period from the date of your receipt , in case of any defect , we will make up for the corresponding qtys immediately or in next new shipment after you send us the evidence of defective product images or videos.
Any other questions , kindly contact me for further details any time !!!
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
Supply Ability: 5 sets per Month
Keywords: Rock stone impact
crusher machine
Dimension(L*W*H):2479x 2970x 2050 mm
Capacity(t/h): Max 600 t/h
Warranty of core components: 1 year
Key Selling Points: Low Maintenance Cost
Motor Type: AC Motor
Input Max Feeding Size: 500 mm
Machinery Test Report: Provided
Condition: New
Usage: ore,quarry ,sand making
Place of Origin: China
Warranty: 1 Year
Model type: PF
Rotate speed: 590-1480r/Min
Construction equipment (home improvement, electrical supply, pipes and fitting etc..), heavy machinery: mining equipment, excavator, drilling, and so on
paper and packaging, production line: kraft paper, plastic and paper box, aluminum foil, plastic wrap, boxes, paper cups, take a way box and so on..
renewable energy: solar panels, inverter, photovoltaic chemical and raw material: soda ash, titanium, pe, ppe.Our company hangzhou xing ying technology co., ltd.(astrioglobal) also provides exporting, quality control, international logistics and consulting/negotiation.
The pottery stone ore shown in the earlier photograph is a particularly high-quality special-grade material among our pottery stones. Pottery stones are generally finely crushed, and used as the material for ceramics, bone china, and sanitary ware (toilets, sinks, etc.).
Products are shipped out from our mine in sizes of <= 10 mm obtained by roughly crushing the stones. They are shipped in bulk or by filling flexible containers using large trucks.
Stone crusher is widely used in mining, metallurgical, construction, chemistry, petrochemicals, transportation, energy, building materials industry, suitable for crushing high hard, mid hard and soft rocks and ores such as iron ore, limestone, slag, marble, quartz, granite, cement, clinker and so on. Stone crusher features large crushing rate, high yield, equal product size, simple structure, reliable operation and easy maintenance, economic operating costs etc. Our stone crusher contains PE jaw stone crusher, JCE jaw stone crusher, PF stone crusher, HPC cone stone crusher, VSI stone crusher, mobile stone crusher, PC stone crusher, etc.
We Are Leading Manufacturer Of All Types Of M-sand Unit, Vertical Shaft Impactor (vsi), Sand Washing Classifier, Vibrator Screen, Conveyor, Etc., We Are Also Concentrated In Manufacturing Of Conveyor, Rollers, Roller Stand, Head & Tail Drums, All Size And Range Of Vibrating Screen Wire Mesh With Good Quality
Low Consumption Mining Crusher Machine , Rock Jaw Crusher is crushing equipment which mainly be applied in metallurgy, mine, chemical industrial, cement, building, fireproofing materials and ceramics and other industries to process middle hardness mineral. It is mainly used in various soft and hard mineral whose compression strength is no more than 300MPa, and the size of the biggest lumpiness should not be bigger than that of technical specifications.
PF Series Impact Crusher is one kind of equipment to crushing the brittle material which compression strength no more than 350 Map, the advantage including high crushing ratio, uniform product grain and low over crushing, low energy consumption, high adjustment range of product grain size and optional crushing etc, which is mainly used in mine, metallurgy, cement, construction material, coal etc for secondary crushing and fine crushing the medium hardness material.
Application:
Metallurgy, construction material, mine, beneficiation and large block material crushing.
Our advantages:
1. Large feeding port and high crushing cavity, suitable to crushing the material with high hardness and big grain size, and less powder.
2. The gap between impact plate and hammer plate is adjustable, so the discharging grain size can be effective control and the grain shape is well.
3. The hammer, impact plate and lining plate are made of new type abrasion-proof material with long working life and impact protection, wear protection.
4. Because of the function of three-stage crushing and plastic, so the crushing ratio is high, and the product shape is cube and can optional crushing.
5. The multi-function hydraulic station has many function of hydraulic discharge gap with high speed, impact plate stable vibration and the body open automatically.
The PF series impact crusher is mainly compose of the rack, driving system, rotor, hammer and impact plate etc. The main feature including:
1.Rack: It composed by two parts of upper and lower with connection by bolt. All the parts contact the crushed material in the rack have set replaceable lining plate.
2. Driving System: The main shaft and rotor are driving by motor through belt then doing the high speed rotary motion.
3. Rotor: It adopts entire cast steel structure with high mass force, solid and durable, convenient to install the hammer.
4. Impact Plate: It is made from new type abrasion material and hanging freely inside the equipment. One end connect with the two sides of the rack through hanging shaft hinge, another end is bearing in the upper rack cone gasket through stay bolt which is adopt a sphere gasket, it can prevent the equipment damage by non-crushing material when crushing material.
5. Hammer: It is made from new type abrasion material and fixed on the rotor through wedge block
The jaw crusher is widely used in mining, building materials, chemical industry, metallurgy and so on. The Jaw Crusher is suitable for primary and secondary crushing all kinds of minerals and rocks with comprehensive strength less than 320 MPa.
Input size: 480-940mm
Processed materials:
Concrete waste, iron ore, copper ore, gold ore , manganese ore, gravel, granite, river stone, basalt, limestone, dolomite, quartz, coal, etc .
Applications:
Mining, metallurgy, construction, highway, railway, and water conservancy, etc.
Track-mounted impact crusher is a track-mounted crusher designed to crush quarry rock or recyclable materials such as concrete and asphalt. It is used for soft to medium-hard natural stone and for the reprocessing of residual construction materials.
The portable impact crusher is loaded with great features such as low cost, high efficient, high crushing ratio, powerful crushing etc..Greater flexibility, quicker setup and easier maintenance are huge cobratrack advantages.
Track-mounted mobile impact crusher is ideally suited for small to medium sized operators in the quarrying, aggregate, demolition, recycling and plant hire industries.
We're constantly aiming to produce the very best in specialist mining and construction equipment. We have many types of crushers.
Standard type: mobile jaw crusher plant, mobile cone crusher plant;
Primary combination type: cone crusher-screen combined mobile plant;
Multi-combination type: according to the different requirement of customers, we can integrate the primary crush, secondary crush or third lever crush flexibly. And try our best to optimize the combination between the crush and screen.
Different models of machine prices are different, please visit the specific site for specific prices.More:
The hammer head of the crusher is an essential accessory for the coal mine crusher. At present, the common crusher hammer head on the market is generally divided into two kinds, forging hammer head and casting hammer head.
The hammer head of forging crusher is mainly used to heat the blank and apply pressure on the blank by forging machine to produce plastic deformation of the blank, so as to obtain the hammer head of the crusher with the given shape, size and mechanical properties. The casting loose defect caused by casting hammers can be greatly changed by forging and the structure of hammers can be optimized. Therefore, the forging hammer head performance is superior to the casting hammer head, relatively also more wear-resisting.
In order to guarantee the wear resistance of forging hammer head, it is necessary to choose the material with better wear resistance. At present, the common materials in the market include high manganese steel, high chromium cast iron, low carbon alloy steel, etc., which can be selected according to the use conditions of different mining areas.
Coal machine parts manufacturer Henan Shuanzhi production of various types of forging hammer head, crushing shaft group. More coal accessories small knowledge, welcome you to continue to pay attention to Henan Shuangzhi.
For the construction industry, this is really a "difficult" year, limiting the sand and gravel mining because of strict environmental supervision, and the price of sand and gravel has risen nationwide. Even in the off-season, it is still difficult to buy best-quality sand.
For the sand and gravel plant, the sand factory that does not meet the standard has lost a lot. For the problem of environmentally strict, HXJQ Machinery has developed and produced several types of environmentally friendly building stone crusher, such as hydraulic cone crusher, fixed jaw crusher, portable rock crusher, tracked crusher, etc. Green sandstone factory has opened the new "stone" generation of the environmental stone factory!
From a macro perspective, Hongxing Machinery building stone crusher is mainly divided into fixed and mobile types, and the two types have different working states, different cost inputs, and different advantages, but they both have environmental protection and stable operation.
https://www.hxzgcrusher.com/
Jaw crusher application:
Jaw crusher is widely used in mining , smelling, building material, highway, railway, water conservancy , chemical industry and many other departments, for this machine, the suitable crushed material are pyrite, limestone, basalt, phosphate, heavy crystal stone, calcium carbide, coke, etc.
Jaw crusher features:
This jaw crusher is composed of machine frame, eccentric shaft, large belt pulley, flywheel, movable jaw , side guard, toggle plate goggle plate backseat, adjust gap screw, return spring, fixed jaw plate and movable plate, among them, the toggle plate still play a role as insurance. This series have: high crushing ratio, even granularity, simple structure, reliable operation, easy maintenance, low operating cost.
1.Crushing chamber is deep and no dead zone, improving feeding ability and capacity
2.Crushing ratio is high, finished product is regular
3.Pack discharge mouth adjustment device is reliable and convenient, and its adjustment range is large , increasing the equipment flexibility.
4.Lubrication system is safe and reliable, easy to replace the spare parts, simple maintenance
5.Simple structure, reliable operation, low operating cost.
6.The equipment is saving energy: single machine can save energy by 15-30%, and the system can save above one time.
7.The discharge mouth adjustment range is large, which can meet different customers need.
8.Low noise, small dust.
Jaw crusher operating principle:
The motor drives the belt wheel, and makes movable jaw up and down by eccentric shaft. When the movable jaw rises, the angle between the fixed jaw and movable jaw gets larger, and the materials can be crushed to reach the crushing target. When the movable jaw is down, the angle between the fixed jaw and movable jaw becomes smaller. The movable jaw plate leaves the fixed jaw plate under the function of drawbar and spring, and then the crushed materials are discharged from the lower outlet of the crushing cavity.
