Find Verified Standard Motion Sensor Module Suppliers, Manufacturers and Wholesalers

DC Input Motion Sensor Module
Standard Motion Sensor Module
5V/12V DC Input Microwave Motion Sensor - Standard Version
HNS101D
5.8GHz C-band microwave, tri-level dimming function.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:25mA.
Features
5.8GHz C-band microwave, tri-level dimming function.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:25mA.
5V DC PWM output or 0~10V DC signal.
Super compact, flexible to be integrated into any suitable fixtures.
Dual-PD technology, real Dayligh t m onitoring function for built-in application.
8 pin DIP switch setting, multiple options to meet different customer demands.
Detection range up to 12m in diameter.
Mounting height: 3~6m.
Operation temperature; -20? ~ + 70?.
RoHS compliant.
Settings
Detection range
Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application.
Hold-time
Hold-time means the time period to keep the lamp on 100% after motion detected.
*when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off.
Daylight sensor
Daylight sensor means the daylight threshold to enable or disable the sensor function.
"Disable": The sensor works always, even during daylight.
w50lux": The sensor works only in twilight.
w10lux, 2luxw: The sensor works only in the dark.
Stand-by period
This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people.
?+? means bi-level dimming control, the fixture never switch off.
Stand-by dimming level
This is the dimmed low light level you would like to have after the hold-time in the absence of people.
Daylight monitoring function
Utilizing the Dual-PD technology, this sensor can tell the difference of natural light and artificial light(lamp) from behind the diffuser, switch on automatically(even without movements) when the ambient light is below target value, and then switch off automatically whenever the artificial light is not required(ambient light is bright enough).
This is the REAL & INTELLIGENT daylight monitoring sensor for built-in installation.
Note: Lux-Off sampling time?30s; Lux-On sampling time?10s.
Lux-On function takes effect only when standby dimming period set at.

DC Input Motion Sensor Module
Standard Motion Sensor Module
5V/12V DC Input Microwave Motion Sensor - Standard Version
HNS101D
5.8GHz C-band microwave, tri-level dimming function.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:25mA.
Features
5.8GHz C-band microwave, tri-level dimming function.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:25mA.
5V DC PWM output or 0~10V DC signal.
Super compact, flexible to be integrated into any suitable fixtures.
Dual-PD technology, real Daylight monitoring function for built-in application.
8 pin DIP switch setting, multiple options to meet different customer demands.
Detection range up to 12m in diameter.
Mounting height: 3~6m.
Operation temperature; -20 ~ + 70.
RoHS compliant.
Settings
Detection range
Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application.
Hold-time
Hold-time means the time period to keep the lamp on 100% after motion detected.
*when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off.
Daylight sensor
Daylight sensor means the daylight threshold to enable or disable the sensor function.
"Disable": The sensor works always, even during daylight.
w50lux": The sensor works only in twilight.
w10lux, 2luxw: The sensor works only in the dark.
Stand-by period
This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people.
+ means bi-level dimming control, the fixture never switch off.
Stand-by dimming level
This is the dimmed low light level you would like to have after the hold-time in the absence of people.
Daylight monitoring function
Utilizing the Dual-PD technology, this sensor can tell the difference of natural light and artificial light(lamp) from behind the diffuser, switch on automatically(even without movements) when the ambient light is below target value, and then switch off automatically whenever the artificial light is not required(ambient light is bright enough).
This is the REAL & INTELLIGENT daylight monitoring sensor for built-in installation.
Note: Lux-Off sampling time30s; Lux-On sampling time10s.
Lux-On function takes effect only when standby dimming period set at+

-

DC Input Motion Sensor Module
Standard Motion Sensor Module
5V/12V DC Input Microwave Motion Sensor - Standard Version
HNS101D
5.8GHz C-band microwave, tri-level dimming function.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:25mA.
Features
5.8GHz C-band microwave, tri-level dimming function.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:25mA.
5V DC PWM output or 0~10V DC signal.
Super compact, flexible to be integrated in t o any suitable fixtures.
Dual-PD technology, real Daylight monitoring function for built-in application.
8 pin DIP switch setting, multiple options to meet different customer demands.
Detection range up to 12m in diameter.
Mounting height: 3~6m.
Operation temperature; -20? ~ + 70?.
RoHS compliant.
Settings
Detection range
Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application.
Hold-time
Hold-time means the time period to keep the lamp on 100% after motion detected.
*when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off.
Daylight sensor
Daylight sensor means the daylight threshold to enable or disable the sensor function.
"Disable": The sensor works always, even during daylight.
w50lux": The sensor works only in twilight.
w10lux, 2luxw: The sensor works only in the dark.
Stand-by period
This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people.
?+? means bi-level dimming control, the fixture never switch off.
Stand-by dimming level
This is the dimmed low light level you would like to have after the hold-time in the absence of people.
Daylight monitoring function
Utilizing the Dual-PD technology, this sensor can tell the difference of natural light and artificial light(lamp) from behind the diffuser, switch on automatically(even without movements) when the ambient light is below target value, and then switch off automatically whenever the artificial light is not required(ambient light is bright enough).
This is the REAL & INTELLIGENT daylight monitoring sensor for built-in installation.
Note: Lux-Off sampling time?30s; Lux-On sampling time?10s.
Lux-On function takes effect only when standby dimming period set at+?

Standard Motion Sensor Module
DC Input Motion Sensor Module
5V/12V DC Input Microwave Motion Sensor - Standard Version
HNS102
5.8GHz C-band microwave, tri-level dimming function.
Input voltage: 12V DC (5V & 24V DC version available on request).
Input current: 25mA.
Features
5.8GHz C-band microwave, tri-level dimming function.
Input voltage: 12V DC (5V & 24V DC version available on request).
Input current: �?� 25mA.
0~10V DC dimming output signal.
Super compact, flexible to be integrated into any suitable fixtures.
Dual-PD technology, real Daylight monitoring function for built-in application.
8 pin DIP switch setting, multiple options to meet different customer demands. 
Detection range up to 12m in diameter.
Mounting height: 3~6m.
Operation temperature: -20�??~ +70�?? .
RoHS compliant.
Detection range
Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application.
Hold-time
Hold-time means the time period to keep the lamp on 100% after motion detected.
*when hold-time set as 3s# sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off.
Daylight sensor
Daylight sensor means the daylight threshold to enable or disable the sensor function.
"Disable": The sensor works always, even during daylight.
w50lux": The sensor works only in twilight.
w10lux, 2luxw: The sensor works only in the dark.
Stand-by period
This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people.
means bi-level dimming control, the fixture never switch off.
Stand-by dimming level
This is the dimmed low light level you would like to have after the hold-time in the absence of people.

-

SENSOR OPTICAL 10-150CM ANALOG

Our most advanced intelligent spot detectors, multi-criteria/multi-sensor devices use multiple sensors to detect various conditions in an environment sensing a wider range of fires with greater accuracy.

Features & Benefits:

Multi-Criteria/Multi-Sensor smoke detection
Unique ability to detect major elements of a fire
Highest nuisance alarm immunity
Advanced algorithms interpret and respond to multiple inputs

Honeywell BW Solo is a easy to service single-gas detector with BLE connectivity that provides real-time visibility into the status and safety of hazardous-area workers, helping companies respond faster, more knowingly and decisively to safety incidents. The first single-gas detector with the 1 Series sensor for CO, H2S and O2

Features & Benefits:
User-friendly operation,
Easy-to-read display for multiple languages,
Lightweight convenience,
Ease of maintenance,
Serviceability,
The new 1-Series sensor for enhanced reliability,
Connected Bluetooth Low Energy (BLE) capabilities.

AC Input Microwave Motion Sensor - Detachable Version + Remote Controllable
Standard AC Input Motion Sensor
Microwave Motion Sensors AC Input
HNS204
5.8GHz C-band microwave motion sensor, on/off control.
Operating voltage: 220~240V AC, 50Hz.(EU version)
120-277V AC, 60Hz.(US version)
Features
5.8GHz C-band microwave motion sensor, on/off control.
Operating voltage: 220~240V AC, 50Hz.(EU version)
120-277V AC, 60Hz.(US version)
Rated load: 200W @ 120VAC, (capacitive)
400W @ 200~277VAC, (capacitive)
Stand-by power:

-

Microwave Motion Sensor Antenna Module
Microwave Sensor
Microwave Motion Sensor
HNM01
Low cost.
5.8GHz C-band miniature transceiver.
Patch antenna, antenna gain: 2 dBi.
Beam aperture: 30
Features
Low cost.
5.8GHz C-band miniature transceiver.
Patch antenna, antenna gain: 2 dBi.
Beam aperture: 30
2 balanced mixer.
5dBm EIRP output power.
Receiver bandwidth: 1Hz ~ 2KHz.
Operating current(CW mode): 13.5mA@5V. Low power consumption(Pulse mode): Average current: 1.5mA typ.
Pulse width(min.):10~50 s(10kHz~2kHz) Duty cycle:10% DC
RoHS compliant
Tested to EN300 440

-

The mentha water is steam distilled from fresh blossoms Bulgarian mentha piperita of during the months of may and June of each year. It is a completely natural product for skin and hair application.
Transparent liquid, colorless; specific aroma; essential oil content 0.03, ethyl alcohol content 3.44, relative density 20 C 0.9827, PH 5.25, microbiological purity - corresponds to standard.

Benefits:

Has an antiseptic and anti-inflammatory effect on the skin.
Soothes the skin after sunburns or razor cuts.
Gently cleanses and tightens the pores of the oily skin.
Moisturizes the skin and improves its general condition.

Low cost;
5.8GHz C-band miniature transceiver;
Patch antenna, antenna gain:2 dBi.
Beam aperture: 30º;
2 balanced mixer;
5dBm EIRP output power;
Receiver bandwidth: 1Hz ~ 2KHz;
Operating current(CW mode):13.5mA@5V;
Low power consumption (Pluse mode);
Average current:1.5mA typ.
Pulse width (min.):10~50μs(10kHz~2kHz);
Duty cycle:10% DC
RoHS compliant
Tested to EN300 400

Origin: VietNam
Capacity: Weekly 100-140 MTS
Natural Bright Green color
Exporting Standard And Quality
- Washed and polished
- Intact firm, Green color and good uniformity
- No cracks, no black part or rotten part

5V/12V DC Input Microwave Motion Sensor - Standard Version
DC Input Motion Sensor Module
Adjustable Motion Sensor Module
HNS101
5.8GHz C-band microwave.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:25mA.
5V DC high-low voltage output signal.
Features
5.8GHz C-band microwave.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:�?�25mA.
5V DC high-low voltage output signal.
Super compact, flexible to be integrated into any suitable fixtures.
Dual-PD technology, real Lux-Off function for built-in application.
8 pin DIP switch setting, multiple options to meet different customer demands. Detection range up to 12m in diameter.
Mounting height: 3~6m.
Operation temperature: -20�?? ~ +70�??.
RoHS compliant.
Settings
Detection range
Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application.
Hold-time
Hold-time means the time period to keep the lamp on 100% after motion detected.
*when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off.
Daylight sensor
Daylight sensor means the daylight threshold  to enable or disable the sensor function.
"Disable":The sensor works always, even during daylight. w50lux, 25lux": The sensor works only in twilight.
"10lux, 2lux": The sensor works only in the dark.

-

5V/12V DC Input Microwave Motion Sensor - Standard Version
DC Input Motion Sensor Module
Adjustable Motion Sensor Module
HNS101
5.8GHz C-band microwave.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:25mA.
5V DC high-low voltage output signal.
Features
5.8GHz C-band microwave.
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:25mA.
5V DC high-low voltage output signal.
Super compact, flexible to be integrated into any suitable fixtures.
Dual-PD technology, r eal Lux-Off function for built-in application.
8 pin DIP switch setting, multiple options to meet different customer demands. Detection range up to 12m in diameter.
Mounting height: 3~6m.
RoHS compliant.
Settings
Detection range
Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application.
Hold-time
Hold-time means the time period to keep the lamp on 100% after motion detected.
*when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off.
Daylight sensor
Daylight sensor means the daylight threshold� to enable or disable the sensor function.
"Disable":The sensor works always, even during daylight. w50lux, 25lux": The sensor works only in twilight.
"10lux, 2lux": The sensor works only in the dark.

We offer a wide plethora of bluish-white lustrous metal Zinc. It is brittle at ambient temperatures but is malleable at 100 to 150C. Being a good conductor of electricity it has a wide usage in numerous applications. We offer this high quality Zinc to our clients at very economical price.

Properties
Melting point : 419.5C
Boiling point : 911C
Resistivity : 5.96 micro ohm-cm at 20 C
Standard state : solid at 298 K
Color : bluish pale grey
Classification : Metallic

We are engaged in offering Special High Grade Ingots and Jumbos of about 1 M. Ton size. LME registered / Non-registered / Special High Grade Ingots and Jumbos as well as High Grade and Zamak 3 etc are offered by us.

Standard Sugar Icumsa 20

Price : USD 560-600

Product Description :
Color: 20 Icumsa
Polarizaition 99.9%
Moisture: 0.04%
Conductivity Ash: 0.04%
Reducing sugar: 0.03%

Keywords :
MOQ :25 MT
Place Of Origin : Thailand, Vietnam/ Brazil
Brand Name : Private Label

Gillette Fusion5 men's razor blade refills each have 5 precision blades spaced closer together (vs. Mach3) for less feel of irritation and incredible comfort. Each blade refill also has a Precision Trimmer on the back, great for edging tough areas such as under the nose and sideburns. One razor blade refill equals up to one month of shaves. These Fusion5 blade refills can be used with any Fusion5 razor handle.

Features include:

5 precision blades, helping reduce pressure per blade for a comfortable shave (vs. Mach3)
Precision Trimmer on back great for edging tough areas (nose and sideburns)
1 razor blade refill equals up to one month of shaves
Fits with any Fusion5 blade refills

SVR3L is made from latex harvested from our rubber plantation. It can meet customer strict requirement about some of technicalities such as: the PO, Color (Lovibond), SVR3L is made from latex harvested from our rubber plantation. It can meet customer strict requirement about some of technicalities such as: the PO, Color (Lovibond),

Latex is preserved by ammonia or sodium sulfite. Then coagulated with formic acid, followed by shredding by passing through a rolling mill, washing system and hash.

Premium Standard White Sugar ICUMSA 20 | High Purity | FOB Thailand, Vietnam & Brazil

Price : USD 560
Product Description :
Standard Sugar ICUMSA 20 is a high purity, refined white sugar known for its brilliant color, fine grain, and exceptional quality. Ideal for food processing, beverages, confectionery, pharmaceuticals, and retail packaging, this sugar meets strict international standards.

Product Specification:
Origin: Thailand, Vietnam/ Brazil
Color: 20 Icumsa
Polarizaition 99.9%
Moisture: 0.04%
Conductivity Ash: 0.04%
Reducing sugar: 0.03%

Key Features:
Brilliant white color with 20 ICUMSA rating
High purity refined sugar (Polarization 99.9%)
Ideal for industrial and food-grade applications
Non-GMO and free from foreign matter
100% dry, fine-grain, and free-flowing
Available in bulk with flexible packing options
Consistent supply from top sugar-producing countries

Packaging & Delivery:
Price: FOB Thailand, Vietnam & Brazil $560 - $600 per MT
Minimum Order: 25 MT (1 x 20FT Container)
Packaging Options: 5kg, 10kg, 25kg, 50kg PP Bags or Customized Packaging Available

Certification & Compliance:
ISO - International Quality Standards
HACCP - Food Safety Certified
HALAL- Approved for Muslim Markets

Contact US
Ensure premium refined sugar for your supply chain. Inquire now to get a detailed quotation and start your long-term partnership with KHUMSUB a trusted supplier of ICUMSA 20 sugar from Thailand, Vietnam, and Brazil.

Keywords : Bulk White Sugar ICUMSA 20
ICUMSA Sugar 20 Wholesale
Export Grade Sugar ICUMSA 20

MOQ : 25MT ~ 1 cont x20FCL
Place Of Origin : Thailand, Vietnam/ Brazil
Brand Name : Private Label