Analog type Stable performance Fibre Fineness Tester for disordered cotton fiber
Model:QS0175
Weightï¼?12kg
Sample weight:8.0g士0.016g
Measuring rangeï¼?2.5~6.5 Micronaire value
Accuracyï¼?�±0.1 Micronaire value
Power supplyï¼?AC220V,50Hz,6w
Dimensionsï¼?250mm�?280mm�?340mm
$1,000.00 - $2,000.00/ set |1 set/sets(Min. order)
Warranty: 1 Year
Standard: ISO 2403
Power:Electronic
MOQ:1set
QS0175 Fibre Fineness Tester is used to determine the Micronaire value of disordered cotton fiber. A known air flow goes through a certain amount of sample cotton inside a tube to get the value of air resistance which display as Micronaire value.
Vibratory fineness tester can measure the fiber line density, and can directly display the linear density of single value, the average and the coefficient of variation. Besides, the external printer can print test results.Instruments and instrument line strength and elongation, can accurately test a single fiber strength, initial modulus and breaking work.
Packaging Details:
1. The equipment is covered with film is protect it from water vapour during the trip.
2. The box is filled with foam to protect the equipment from impact.
3. Exported wooden box made from plywood, don't need fumigated.
ps:(WLJCDM809)
Tag:fibre fineness tester,fiber fineness tester,electronic fibre finess tester,cotton fibre tester,wool fineness tester,fabric fiber fineness tester,micronaire fineness tester,cotton fiber fineness tester,tester,fineness analysis tester,fibre tester,fiber fineness testing machine,automatic fiber fineness tester,single fibre strength tester
1. Chopped basalt fiber
Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete.
2. Characteristics of chopped basalt fibers
(1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability.
(2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.
1. Basalt short fiber - a new material to replace steel fiber. Basalt short fiber is an inorganic mineral fiber with a length of less than 50mm, which can be evenly dispersed in cement concrete.
2. Characteristics of basalt short fiber (1) the specific gravity of steel fiber is 7.8 and that of cement concrete is 2.5. After mixing, the specific gravity of steel fiber is higher than that of cement, and the cement will sink and have poor dispersion.
The specific gravity of basalt short fiber is 2.6, which is basically equivalent to that of cement concrete. After mixing, it does not sink, has good dispersion, is degradable, and is green. The road surface will not be as hard as steel fiber, resulting in car driving noise..
(2) Basalt staple fiber is a real "multifunctional" fiber. Acid and alkali resistance (especially alkali resistance, fully applicable to cement concrete), low and high temperature resistance, insulation and sound insulation. The tensile strength is three times that of steel fiber. The corrosion resistance of basalt fiber is better than that of steel fiber. The compressive strength is 20% higher than that of steel fiber, which is suitable for harsh environment. It has excellent comprehensive performance.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of 50% steel fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with cement concrete and mortar. Fresh basalt fiber concrete has stable volume, good workability and durability, and has excellent high temperature resistance, impermeability, crack resistance and impact resistance.
Capsicum Oleoresin is prepared by extracting the crushed capsicum (Capsicum Annum Linn) with volatile solvents by percolation method. It contains the pungent principles, capsicin not less that 8 percent. It also contains the red colouring matter called Capsanthin. This product is a powerful irritant and a carminative, which is also used as a counter irritant in lumbago and neuralgia. It can also be used to treat stomach ache that involves poorly functioning stomach muscles and as an antibacterial agents.
Extraction of oleoresin capsicum from peppers involves finely ground capsicum, from which capsaicin is extracted in an organic solvent such as ethanol. The solvent is then evaporated, and the remaining wax like resin is the oleoresin capsicum. An emulsifier such as propylene glycol is used to suspend the OC in water, and pressurized to make it aerosol in pepper spray. The high performance liquid chromatography (HPLC) method is used to measure the amount of capsaicin within pepper sprays. Scoville Heat Units (SHU) are used to measure the concentration or "heat" of pepper spray.
A synthetic analogue of capsaicin, pelargonic acid vanillylamide (desmethyldihydrocapsaicin), is used in another version of pepper spray known as PAVA spray which is used in the United Kingdom. Another synthetic counterpart of pepper spray, pelargonic acid morpholide, was developed and is widely used in Russia. Its effectiveness compared to natural pepper spray is unclear.
Pepper spray typically comes in canisters, which are often small enough to be carried or concealed in a pocket or purse. Pepper spray can also be bought concealed in items such as rings. There are also pepper spray projectiles available, which can be fired from a paintball gun. It has been used for years against demonstrators.
Derived from chilli peppers, oleoresin capsicum is the active ingredient in pepper spray and in some topical pain relievers.
[Alias] foaming powder; sodium lauryl sulfate; sodium lauryl sulfate; sodium dodecyl sulfate, sodium dodecyl sulfate
[English name] Sodium dodecyl sulfate.
[Abbreviation] SDS
[CAS No.] 151-21-3
[Molecular formula] ROSO3Na R = C12alkyl, C12-C14alkyl
[Molecular weight] 288.38 (R = C12alkyl), 296 (R = C12-C14alkyl)
[Grade] It can be divided into industrial grade (GB/T15963-2008), toothpaste grade (QB/T2900-2012), latex grade and reagent grade according to application fields and standards.
[Technical Indicators]
[Performance and Applications]
This product is a white or yellowish sticky substance, commonly used in detergents and textile industry. Belon to an anionic surfactant.It is easy to dissolve in water, has good compatibility with anions and nonions, and has good emulsification, foaming, penetration, decontamination and dispersion properties. It is widely used in toothpaste, shampoo, shampoo cream, shampoo, washing powder, liquid washing, cosmetics and plastic demoulding, lubrication, pharmaceutical, papermaking, building materials, chemical and other industries.
(1) Used as detergent and textile auxiliaries, also used as toothpaste foaming agent, mine fire extinguishing agent, emulsion polymerization emulsifier, wool detergent, etc.
(2) Used as anionic surfactant, emulsifier and foaming agent
(Use 3) GB 2760-96 stipulates that it is a processing aid for food industry. Blowing agent; emulsifier; anionic surfactant. Used for cake, beverage, egg white, fresh fruit, fruit juice beverage, edible oil, etc.
(4) It is used as an emulsifier for drugs, cosmetics and synthetic resins. Foaming agent for toothpaste and fire extinguisher. Used as a detergent for fine silk and wool fabrics. Flotation agent for metal beneficiation.
(5) Used as detergent and textile auxiliaries, also used as toothpaste foaming agent, fire extinguishing foam liquid, emulsion polymerization emulsifier, pharmaceutical emulsion dispersant, shampoo and other cosmetics, wool detergent.
(Use 6) Biochemical analysis, electrophoresis, ion pair reagent
Micro silica also known as fume, is an amorphous (non-crystalline) polymorph of silicon dioxide, silica. It is an ultrafine powder collected as a by-product of the silicon and ferrosilicon alloy production and consists of spherical particles with an average particle diameter of 150 mm. The main field of application is as pozzolanic for high performance concrete because of its extreme fineness and high silica.
Applications :
Silica is added to Portland cement concrete to improve its properties, in particular its compressive strength, bond strength, and abrasion resistance. These improvements stem from both the mechanical improvements resulting from addition of a very fine powder to the cement paste mix as well as from the pozzolanic reactions between the silica fume and free calcium hydroxide in the paste.
Advantages :
Addition of silica also reduces the permeability of concrete to chloride ions, which protects the reinforcing steel of concrete from corrosion, especially in chloride-rich environments such as coastal regions and those of humid continental roadways and runways (because of the use of deicing salts) and saltwater bridges.
Kaolin uses are multiple and diverse. Kaolin are used as functional filler, extender, ceramic raw material and pigment because of its whiteness and fine particle size. Kaolin also hold importance as raw material in refractory applications, concrete, rubber and fiber glass manufacturing. We, as a Kaolin Exporter welcome any size of international orders from Middle East and other countries.
Applications:
Paper:
Kaolin used as a coating pigment and as a filler to replace fiber. It possesses desirable optical properties.
Concrete:
Kaolin helps to improve strength and durability of concrete. When added to concrete mix, reacts with free lime released during cement hydration to produce additional cementitious material, resulting in an improved high performance concrete.
Plastics :
Kaolin is widely used as filler in the plastics industry because of its inert chemical nature and its unique size, shape and structure.
Agriculture :
It is used as a carrier and diluent in fertilizers, pesticides and related products. It is suitable as carrier because it aides the retention of the formulations on the plant.
Rubber :
It is commonly used as functional filler in rubber applications. While Kaolin improves overall performance for Rubber in general, different types of white pigment play specific roles in rubber application.
Paint :
Kaolin used as an extender in paints. It reduces the amount of expensive pigment such as Titanium Dioxide. It assists with desirable rheological properties that help maintain proper dispersion and provide bulk to the product.
Ceramic :
Kaolin improves whiteness and brightness of ceramic body. Good plasticity, good shrinkage, low water absorption and casting rate are also very important properties of kaolin.
Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries.
The Major Utilization Areas Of Fly Ash :
- Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC).
- Part replacement of OPC in cement concrete.
- High volume Fly Ash concrete.
- Roller Compacted Concrete used for dam & pavement construction.
- Manufacture of ash bricks and other building products.
- Construction of road embankments, structural fills, low lying area development.
- As a soil amender in agriculture and wasteland development.
Types of Fly Ash:
- According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties.
- Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product.
- Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash.
- Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics.
THINTEXOTM-Modified Starch
Low viscosity modified starch for warp yarn sizing
SPECIFICATIONS
Appearance : off white to cream colour fine free flowing powder
Solubility : Insoluble in cold water
pH value( 15 % aqu. soln) : 5 to 7
Viscosity of 15% soln : Max 60 cPs
(Brookfield viscometer ( Spl.2 , rpm:100 @ 80oc)
LVDV II+ pro)
Moisture content (w/w) : Max 13%
Ash content (w/w) : Max 0.5%
Sieve Retention (60 Mesh) : Max 1%
Bulk density (gm/ml) : 0.45 to 0.55
SPECIAL FEATURES :
Constant viscosity.
Optimum penetration & film formation.
Better flexible film .
Easily de sizable product .
Warp- break reducer.
STORAGE
Keep away from direct sunlight and store in a cool, dry, and well-ventilated place.
STABILITY - Stable for one year from the date of manufacture
PACKING - Available in 50Kgs Net weight PP Bags with a moisture-proof line inside.
Natural chewable sticks for dogs, Made from coffee wood. Treat your dog to this "GoodWood" Chew stick. Whilst keeping your dog occupied with this natural, safe stick which is great for their dental hygiene. Great for dogs who love to chew. These sticks have many benefits: caffeine free free from animal traces no artificial ingredients and additives vegan 100% natural and untreated wood Suitable for overweight dogs or dogs with allergies long last entertainment for your dog handcrafted and produced from a sustainable source. During the chewing process, fine wood fibres are released by the dog's saliva. These are harmless can be digested without a problem.
Color: Natural wood color
Size: XXL, XL, L, M, S, XS
Packing: 55x37x 30cm Carton
Drying /Fresh noodle process line/production line
Noodle machine is a kind of equipment which can extrude flour into noodles with necessary tenacity and humidity by relative rotation of flour roller. It can be divided into simple noodle machine, automatic picking noodle machine, assembly line noodle machine, automatic spaghetti machine and so on.
The automatic noodle machine is easy to operate, safe and hygienic, and suitable for eyes. Stable transmission, accurate and efficient transmission power, low noise, no vibration, superior performance and other characteristics, can be equipped noodle drying equipment.
Capacity 150kg -1300kg/hour ,big capacity can customized . Noodle shape: round ,flat from 1.5mm-10mm big to 20mm .
Can equipment noodle drying machine ,noodle packing machine .
Moisture - < 3%
Burning time - > 2.5 Hours
Heat Value (Calory) - > 7500J/kg
Fixed carbon - 80%~95%
Ash - < 2%
Color - Black
Packed in carton boxes 25x25x8 cm, avg. 2.7 kg per box. Any other packing on request.
Charcoal for hookah(Shisha)
1) Our hookah briquette is manufactured from high-quality grade â??Aâ?? birch coal.
2) During burning our product emits natural fine aroma that will be to the liking of true connoisseurs.
3) Due to special manufacturing technology our briquette burns longer and hotter than equivalents from other manufacturers.
4) When used our coal does not become loose and leaves minimum ash afterwards.
5) Environmentally friendly product that does not harm the environment.
6) We guarantee a stable quality of our product.
Moisture - < 3%
Burning time - > 2.5 Hours
Heat Value (Calory) - > 7500J/kg
Fixed carbon - 80%~95%
Ash - < 2%
Color - Black
Packed in carton boxes 25x25x8 cm, avg. 2.7 kg per box. Any other packing on request.
Charcoal for hookah(Shisha)
1) Our hookah briquette is manufactured from high-quality grade â??Aâ?? birch coal.
2) During burning our product emits natural fine aroma that will be to the liking of true connoisseurs.
3) Due to special manufacturing technology our briquette burns longer and hotter than equivalents from other manufacturers.
4) When used our coal does not become loose and leaves minimum ash afterwards.
5) Environmentally friendly product that does not harm the environment.
6) We guarantee a stable quality of our product.
4.Excellent Anti-corrosive And Excellent Weather Resistance.
PVC roof tile can long resist acid, alkali, salt and other corrosive chemicals. It suitable for using in corrosive workshop, acid rain-prone area and coastal area.
5.Good Fire Resistance With Excellent Insulation And Excellent Waterproof Performance.
Belonging flame retardant material, with fire resistance tested by national authoritative departments. The roofing sheet selects highly weather-resistant resin, which is dense and
absorbing no water, with no pore penetration problem.
1. Basalt short fiber - a new material to replace steel fiber. Basalt short fiber is an inorganic mineral fiber with a length of less than 50mm, which can be evenly dispersed in cement concrete.
2. Characteristics of basalt short fiber (1) the specific gravity of steel fiber is 7.8 and that of cement concrete is 2.5. After mixing, the specific gravity of steel fiber is higher than that of cement, and the cement will sink and have poor dispersion.
The specific gravity of basalt short fiber is 2.6, which is basically equivalent to that of cement concrete. After mixing, it does not sink, has good dispersion, is degradable, and is green. The road surface will not be as hard as steel fiber, resulting in car driving noise..
(2) Basalt staple fiber is a real "multifunctional" fiber. Acid and alkali resistance (especially alkali resistance, fully applicable to cement concrete), low and high temperature resistance, insulation and sound insulation. The tensile strength is three times that of steel fiber. The corrosion resistance of basalt fiber is better than that of steel fiber. The compressive strength is 20% higher than that of steel fiber, which is suitable for harsh environment. It has excellent comprehensive performance.
(3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of 50% steel fiber.
(4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with cement concrete and mortar. Fresh basalt fiber concrete has stable volume, good workability and durability, and has excellent high temperature resistance, impermeability, crack resistance and impact resistance.
PREGEL STARCH is a fine white powder. It provides product with viscosity without the need for cooking on high temperatures, which means that the food manufacturer does not need to precook the starch. Pre-gelatinized starches retain most of the functional properties and viscosity of the original base material.
Features:
High Paste formation in cold water
Water holding capacity is high at low temperature
High Pasting property
Viscosity is stable
Excellent thickening characteristics
Excellent solution stability with high flow and spread properties
Application:
Baking Industry
Beverages, meats and dairy products
Confectioneries for gelling, thickening, texture stabilizing
Foam strengthening and crystal growth control in food products
For adhesion, film foaming and glazing
EcoTexTM-SL20 - PVA FREE ONE-SHOT PRODUCT
DESCRIPTION New generation eco-friendly one-shot product for a high-speed shuttleless loom. It is mainly used for 6 to 203 cotton yarns sizing. This product is entirely biodegradable and ecological.
Products are made from grafted starch, anionic polymers, and synthetic fatty matters. It contains a maximum of 13% moisture and an optimized viscosity level. Easily disperse in cold water with little swelling property due to high binding property. Having high penetration power and plasticizing power for heavy construction fabrics weaving.
SPECIFICATIONS
1.Appearance - Off white powder
2.pH value of 5% solution - 6 to 8
3.Solubility - Partially soluble in cold water
4.Viscosity of size mix - 5 to 6 sec (SITRA -6mm cup)
5.Total Moisture - Max 13%
6.Bulk density - 0.5 to 0.6 g/ml
7.Total ash - Max4%
COOKING METHOD
1. Fill the required quantity of water in the cooker.
2. Gradually add EcoTexTM-SL20 and mix for 2 min.
3. Add other ingredients and mix for 2 min.
4. Close the pressure cooker lid.
5. Open the steam value and cook to @ 120�? �ºC or 35psi.
6. Retain in the cooker for 15 to 20 minutes.
7. Then transfer the size mix to storage.
PROPERTIES
1. Moisture regain:
The formation of thin flexible film absorbs water molecules from atmospheric air that maintains the required moisture content of the sized yarn. This property improves the weaving efficiency by reducing the warp stops.
2. Film property:
The very thin strong film gives the inter fibre penetration that improves yarn tensile strength. Optimum elongation and flexible property significantly reduce warp break by overcoming the applied tension during weaving.
3. Abrasion resistance:
A strong film withstands the mechanical friction between yarn to yarn and yarn to machine parts like reed, dropper pin, heald wire, and weft picking element.
DE-SIZING
Easily de-sizable product with hot alkali treatment.
STORAGE
Keep away from direct sunlight and store in a cool, dry, and well-ventilated place.
STABILITY
Stable for one year from the date of manufacture.
PACKING
Available in 50Kg net weight PP bags with moisture-proof liner inside.
Sodium Lauryl Ether Sulfate 70% (SLES 70%) is a kind of anionic surfactant with excellent performance. It has good cleaning, emulsifying, wetting and foaming properties. It is soluble in water easily, compatible with many surfactants, and stable in hard water. It is biodegradable with low irritation to skin and eye.
Detailed Images
Items
Value
Active Matter %
70�±2.0
Unsulphated matter(ref. 100% active matter)
2.5 max
Sodium Sulphate(ref. 100% active matter)
1.5 max
pH-value(1% SLES solution)
7.0 ~ 9.5
Color (5% Am) Klett
10 max
Appearance
White or Light Yellow Emulsion
pH
6.5-8.5
Emulsion Lonic
Weak Anionic
Appropriate Thinner
10-30 â?? Water Thickening
Standard
GB/T 26527-2011
Organic Silicon Defoamer
1. The defoamer is composed of polysiloxane, modified polysiloxane, silicone resin, white carbon black, dispersing agent and stabilizer, etc.
2. At low concentrations, it can maintain good elimination bubble suppression effect.
3. Foam suppression performance is prominent
4. Easily dispersed in water
5. The compatibility of low and foaming medium
6. To prevent the growth of microorganisms
Advantage
It is composed of dispersant and stabilizer, low dosage, good acid and alkali resistance, stable chemical properties, easy to disperse in water, effectively prevent bacterial growth. The properties are stable during storage.
Application
1. Papermaking chemical pulping high temperature vacuum or pressure in the defoaming in pulp washing machine
2. When the alkali refining agent of textile industry, inhibit elimination of treatment before
3. Circuit board cleaning
4. Oil mud defoaming in the process of mining
5. Textile printing and dyeing processing
6. Agricultural chemicals
