Body : Astm a 351 Gr Cf8 / Cf8m
Ball : Astm a 351 Gr Cf8 / Cf8m
Stam : Aisi 304 / Aisi 316
Seat & Seals : Ptfe
Blow Out Proof Stam : Floating Ball Full Bore
Mfg Std : Generally Conforming to Bs 5351
Testing : Bs 6755
Press. Temp Rating : Conform to Table 3 of B 5351
Lever : Aisi 304 With Pvc Sleeve
Ends : Screwed Tp Bsp / Bspt / Npt / is 554
Socketweld to Ansi B 16.11
Size Range : 15mm to 100mm
Body : Astm a 351 Gr Cf8 / Cf8m
Ball : Astm a 351 Gr Cf8 / Cf8m
Stam : Aisi 304 / Aisi 316
Seat & Seals : Ptfe
Blow Out Proof Stam : Floating Ball Full Bore
Mfg Std : Generally Conforming to Bs 5351
Testing : Bs 6755
Press. Temp Rating : Conform to Table 3 of B 5351
Lever : Aisi 304 With Pvc Sleeve
Ends : Flanged to Bs 10 Table "E" / "F"
Size Range : 15mm to 100mm
Body : Astm a 351 Gr Cf8 / Cf8m
Ball : Astm a 351 Gr Cf8 / Cf8m
Stam : Aisi 304 / Aisi 316
Seat & Seals : Ptfe
Blow Out Proof Stam : Floating Ball Full Bore
Mfg Std : Generally Conforming to Bs 5351
Testing : Bs 6755
Press. Temp Rating : Conform to Table 3 of B 5351
Lever : Aisi 304 With Pvc Sleeve
Ends : Flanged to Asa 150#
Size Range : 8mm to 100mm
Body : Astm a 315 Gr Cf8 / Cf8m / 216 Gr Wcb
Ball : Astm a Gr Cf8 / Cf8m / 216 Gr Wcb
Ends : Screwed and / Socketweld End
Hydro Test Pressure : Body : 14 Kg/cm2
Seat : 70 Kg / Cm2
Air Test : 7 Kg/cm2
Size Range : 15mm to 50mm
13906 Ss Investment Casting Three Piece Ball Valve Suppliers
Short on time? Let Ss Investment Casting Three Piece Ball Valve sellers contact you.
Body : Astm a 351 Gr Cf8 / Cf8m
Ball : Astm a 351 Gr Cf8 / Cf8m
Stam : Aisi 304 / Aisi 316
Seat & Seals : Ptfe
Blow Out Proof Stam : Floating Ball Full Bore
Mfg Std : Generally Conforming to Bs 5351
Testing : Bs 6755
Press. Temp Rating : Conform to Table 3 of B 5351
Lever : Aisi 304 With Pvc Sleeve
Ends : Screwed Tp Bsp / Bspt / Npt / is 554
Socketweld to Ansi B 16.11
Size Range : 8mm to 100mm
The manufacture of both granulated and powdered garlic is the same, except for the grinding or powdering process. Granulated garlic is coarse while garlic powder is ground extra fine.
Whole cloves of garlic are peeled, cleaned and then sent into a machine that slices and chops them into smaller sections. The sections are dried in slow ovens for three to four hours. When the garlic has cooled it is ground to the desired consistency, be it granulated or powdered. The finished products are put through sifters to separate any debris or undesirable pieces. Both are packaged in air-tight containers and stored in a cool, dry place.
Granulated and powdered garlic are used to season and enhance the flavor of many foods. Often it is an appropriate substitute when fresh garlic is called for in a recipe. Powdered garlic dissolves almost instantly when incorporated into any dish, hot or cold. Granulated garlic takes a few minutes to become incorporated and release its flavor.
We can offer Garlic Granules in 0.5mm to 1.0mm, 40/60 mesh, 26/40 mesh
- 20 FCL: 10 Mt (Flakes/Cloves), 14-15 Mt (Minced/Granules/Powder)
- 40 FCL H/C: 20 Mt (Flakes/Cloves), 25-30 Mt (Minced/Granules/Powder)
Product Packing
- 12.5/13/14 Kg Paper Bag inside 1 Poly Bag
- 20/25 Kg Cartoon inside 1/2 Poly Bag
- 20/25 Kg Cartoon inside 1/2 Aluminium Foil Bag
Pipe fittings are the general names of parts and components that play the role of connection, control, direction change, diversion, sealing and support in the pipeline system. Steel fittings are pressure fittings. According to the different processing technology, it is divided into four categories, namely, butt welding pipe fittings (divided into weld and no weld), socket welding and threaded pipe fittings, flange pipe fittings.
According to the application:
1. pipe fittings for connecting pipes are: flanges, live joints, pipe hoops, clamps, clamps, throat hoops, etc.
2. changing the direction of the pipe: bends, bends.
3. pipe fittings changing pipe diameter: variable diameter (different diameter pipe), different diameter elbow, branch pipe table, reinforcing pipe.
4. pipe fittings with additional piping branches: three links, four links.
5. pipe fittings for pipe sealing: gasket, raw material belt, thread, flange blind plate, pipe plug, blind plate, head, welding plug.
6. pipe fittings for pipe fixing: clasp, hook, ring, bracket, bracket, pipe clamp, etc.
According to the connection :1, welded pipe fittings 2, threaded pipe fittings 3, clamping pipe fittings 4, clamping pipe fittings 5, socket pipe fittings 6, rubber ring connection pipe fittings
According to the material divided into 1, cast steel pipe fittings 2, forged steel pipe fittings 3, alloy pipe fittings 4, stainless steel pipe fittings.
Pipe fittings are widely used in municipal, petrochemical, west-to-east gas transmission, ships and nuclear power.
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* Screwed, socket-weld and flanged ends
* ASME classes up to 2500
* Variety of actuation option
13906 Ss Investment Casting Three Piece Ball Valve Suppliers
Short on time? Let Ss Investment Casting Three Piece Ball Valve sellers contact you.
