We produce timber, squares, and laths, all freshly cut, with a maximum length of up to 6 meters (4 meters for laths). All of our products are cut to exact dimensions, never undercutting the specified size.
Quality GRADE A1/ A2 ( Quality : Small sound or dead knots < 7 mm are not considered. Tolerance of 1 intergrown knot per side with a diameter up to 8 mm. Knots clusters, through or dead, are not permitted.)
We are timber factory from Estonia. Our company was established in 1992 and we have long and good experience in timber industry. Our production is birch, pine, spruce and larch edged timber.
Thickness 20+ mm
Width 100-250 mm
Length 3000-6000 mm
Grading system Nordic TC (blue book) grading rules
Quality AB
Drying Kiln dry (KD)
Description For our spruce timber production, we use only high-quality wood. Other sizes are possible on request.
Please contact us and send your request. We will consider any proposal.
Hello we sell spruce and pine timber various sizes
Thickness: 30/35/40/45/50/55/60/70/80/90
width:90+
length 2/3/4/5&6m
KD and Fresh
We are FSC certificated
Spruce and pine sawn timber edged to size, planed board, planed moldings. KD / FSC.
16; 19; 25; 44; 47; 50; 58 mm by
100; 125; 150; 200 mm
Length 2-6 m
Lumber is packed in black and white three-layer polyethylene LDP on five sides.
Full cycle of industrial production of spruce-pine sawn timber edged to size, planed board, planed moldings. KD / FSC.
16; 19; 25; 44; 47; 50; 58 mm by
100; 125; 150; 200 mm
Length 2-6 m
Lumber is packed in black and white three-layer polyethylene LDP on five sides.
Pine timber
, We are a large timbering company in latvia and we also have timberyards in latvia, russia. We are producing and exporting sawntimber. We can make from : 1) spruce.(picea abies, whitewood). 2) pine.(pinus silvestris). 3)siberian larch.( larix sibirica). We can also offer-White Oak, White Ash, Beech, Spruce, Pine, Birch, Poplar, Alder, Aspen, Linden (Basswood/Lime), Siberia Larch, Siberia Cedar logs and lumber, S4S(planed-Decking, Wall panel(any sizes, also 4sides T&G) and glued panel(Furniture board)-solid or Finger Join Laminated, glued beam, Stairs, any furniture wood details. Also second grade Pallet productions.
We are DDK trading company, Ukraine offering below wooden
products on very excellent terms and conditions. We are big
manufacturer of these woods in Ukraine. We can hand shake with you in
this business-
1. Sawn timber Pine, Spruce, Pine and Spruce wooden board grade- ABC
2. Beams - Pine. Spruce - wood
3. Decking elements (Pine, Spruce)
4. pine Planed lumber S4S, planed wood S4S grade 1.2
5. Pallet elements, A grade Pallet elements B grade, Pallet elements C
grade- Planed board ABC grade
6. Lamel- furniture, glued, and planed
7. Furniture shield
Saw through center of the timber log. The boards are dried (pine/spruce) as per the state standards.
Softwoods:
Pine - botanical name lat. Pínus sylvestris
Spruce - botanical name lat. Picea abies
Larch - botanical name lat. Larix ibirica
Hardwoods:
Birch - botanical name lat. Bétula alba
Caucasian oak - botanical name lat. Quercus rebut
2/4/6 ex-log through the center of the log
Length:
From 2.4m to 6m
Moisture content: from 14% to natural ( 22%)
Quality: state russian standard
The timber supplied without rotting signs / blue stains / worm wholes / drought rings or through cracks, without brownrot branches - branches are healthy.
Spruce timber - commonly also known under its latin name "Picea Abies" is widely distributed throughout continental Europe and is a timber tree of major economic importance. The large tree usually has a straight, cylindrical trunk and growns to a height of about 30 m (up to 55 m), with a large diameter of about 60 cm (up to 1,5m).
Big sizes - beams:
Thickness - from 100 up to 300 mm
Width - from 100 up to 300 mm
Length - 3000/4000/5000 mm
Small size - beams:
Thickness - from 40 up to 95 mm
Width - from 60 up to 95 mm
Length - 3000/4000/5000 mm
Boards:
Thickness - from 18 up to 50 mm
Width - from 50 up to 250 mm
Length - 3000/4000/5000 mm
Export of wood SARL We are looking for serious buyers only. Hard and soft wood.
These are samples. Contact for more
Eucalyptus 20000m3
Pine 10000m3
Beech 5000m3
Spruce 5000m3
Teak 10000m3
Ayous 7000m3
Ash 10000m3
Poplar 10000m3
oak 3000m3
We supply round and sawn logs, sawn timber
Spruce is light and soft, but nevertheless has good strength and elasticity properties for its relatively light weight. It is not very susceptible to shrinkage and when dried remains stable. Its low natural durability can be compensated for by applying a protective coat of paint.
Sourced from meticulously selected spruce trees, our Spruce Wood for industrial purposes is of the highest quality.
Each piece of wood is processed using advanced techniques to ensure consistency and durability.
Available in various dimensions to suit different industrial requirements.
Responsibly harvested and processed to meet environmental standards
Spruce is light and soft, but nevertheless has good strength and elasticity properties for its relatively light weight. It is not very susceptible to shrinkage and when dried remains stable. Its low natural durability can be compensated for by applying a protective coat of paint
10327 Spruce Timber Suppliers
Short on time? Let Spruce Timber sellers contact you.
