AI control, 210MM, 600W+ LARGE CAPACITY ULTRA HIGH POWER SOLUTION
Independent Single Row 1P
Multipoint Drive 2P
RWDI approved, TUV/CE/JIS/EN1090/AS/NZS1170/MCS/SGS Certificated quality
Auto manufacturing
Easy to install
Lab. testing in Factory before shipment
10-year warranty and more than 25-year lifetime
Project consulting/management
Sst20 inclinometer based on vigors advanced tilt measurement technology, to meet with low cost, high reliability and volume application, performs high performance-cost ratio.
Sst20 employed most universal & mass-produced components, casting aluminum alloy house, universal high reliability m12-5pin industrial connector; full epoxy seal with ip69k protection, auto-test/calibration equipment which not only ensure delivery speed, also keep the consistency of goods.
Thanks for vigor engineers, they adopt advanced technologies as:
- cae/eda simulation;
- modal test for both housing and pcb to eliminate resonance due to vibration;
- comprehensive performance & function test for component & firmware;
- calibration technology based on sst300 high accuracy inclinometer;
- refer mil/ en/ iso/iec standards to enhance sst20 durability & reliability.
Sst20 support remote diagnosis without disass embling. Mtbf more than 10 years per time. Can work in 10m submersible depth long time and has better emc ability.
Sst20 output rs485/ca
n/canopen and voltage/curre
nt signals. Better power management to meet with automotive /truck/vehicle application without regulated power.
Oem service is available with calibrated pcba or mil qualified.
Gulin solar uniaxial latitude tracking mounting system 2x is suit for all kinds of solar installation, and it could adjust angle automatically according to the time. Tracker can adjust angle at the range of -60¡ã to 60¡ã by adopting a slew reduction gear which is driving by 24v DC/AC dynamo .we just need set parameters on the basis of local sunshine situation, The system can adjust the standard position automatically, and guarantee the accuracy , play the solar panel within the maximum power, and greatly save the labor as well.
Solar panel type Frame or frameless
Color Silvery white
Service lif 25years
Why choose our solar panel mounting system?
1. Easy installation.
The professional design makes this solar panel mounting system install easily. So it saves your time and labor.
2. High quality.
All of our solar panel mounting system have the certificates of rosh, ce and iso with 25 years service life.
Also we provide the 10-year warranty.
3. Competitive price.
Concise design saves the materials a lot and makes costs of solar panel mounting system very competitive.
4. Quick delivery
The safety package and quick delivery
The HBP1800 series all-in-one energy storage solution, support 1KW 2KW 3KW output for different load appliances. It's based on the original cabinet design, stacked with solar energy storage lithium battery 960wh~3072wh, and built in battery protection system, fully retain the use of load power in applications of residential, school, commercial and public utility area.
Features higher capacities for greater compatibility with more power-hungry devices, and the latest in USB-C Power Delivery capable of charging larger USB devices like laptops.
Includes pre-installed solar charging optimization module that functions as a maximum power point tracker (MPPT), resulting in up to 40% faster charge times.
With LiFePO4 lithium cells, known for stability and safety, monitored by a state-of-the-art battery management system that prevents overcharge, over-current, and short circuiting.
Built in Multi safety protection that include short circuit, overload and over-temperture and error code reporting.
The HBP1800 series all-in-one energy storage solution, support 1KW 2KW 3KW output for different load appliances. It's based on the original cabinet design, stacked with solar energy storage lithium battery 960wh~3072wh, and built in battery protection system, fully retain the use of load power in applications of residential, school, commercial and public utility area.
Features higher capacities for greater compatibility with more power-hungry devices, and the latest in USB-C Power Delivery capable of charging larger USB devices like laptops.
Includes pre-installed solar charging optimization module that functions as a maximum power point tracker (MPPT), resulting in up to 40% faster charge times.
With LiFePO4 lithium cells, known for stability and safety, monitored by a state-of-the-art battery management system that prevents overcharge, over-current, and short circuiting.
Built in Multi safety protection that include short circuit, overload and over-temperture and error code reporting.
Product Specification
Power Range : 1.0 HP to 2.0 HP
Operating Speed : 0 - 3100 RPM
DC Power Range : 900 Wp - 2000 Wp
DC Voltage Range : 70 Vmp - 110 Vmp
Head Range : 30 Mtr - 90 Mtr
Discharge Range : 8000 LPD - 30000 LPD
Type of Duty : S1
- Zero Running Cost
- Less Maintenance
- Eco-Friendly
- Simple Installation
- Pollution Free
Material Of Construction - Motor
Part Grade
Mechanical Seal : Graphite Ceramic
Motor Shaft : Stainless Steel
Motor Body Pipe : SS-304
Lower Hosing : Aluminum
Diaphragm : High Nitrile butyl rubber
Top Cap : Stainless Steel
Bottom Plate : Stainless Steel
End Cap : Stainless Steel
MATERIAL OF CONSTRUCTION SCREW (HELICAL) PUMP
Part Grade
Outlet : SS-304
Suction : SS-304
Outer Shell : SS-304
Rotor Screw : Stainless Steel
Stator : Rubber Coated Alloy
MATERIAL OF CONSTRUCTION â?? CENTRIFUGAL PUMP
Part Grade
Check valve housing : SS-304
Check valve : PC
Suction : SS-304
Outer Shell : SS-304
Impeller : POM
Bowl : PC
Pump Bush : NBR
Pump Sleeve : Stainless Steel
Pump Shaft : Stainless Steel
Coupling / Pump Couple : Stainless Steel
Warranty: 2 years
After-sale Service: Online technical support
Material: metal
Shelf Life:2 years
Instrument classification:Class II
Safety standard: none
Application: Cardiology
Pure sine wave output
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
Built-in MPPT solar charge controller
MAX PV Array Open Circuit Voltage: 450V
Can provide the power to the load without battery
Combining solar system, AC utility, and battery power source to supply
continuous power
Overload, short circuit and Deep discharge protection
Cold start function
Support USB, RS485 monitoring function
Parallel operation with up to 3 units
WIFI remote monitoring (optional)
PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is
150~430Vdc, which Can help customers make full use of solar energy.
Rated power: 1-5KW
Pure sine wave output
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
Bult in MPPT 60A/80A solar charge controller
Combining solar system, AC utility, and battery power source to supply
continuous power
Overload, short circuit and Deep discharge protection
Cold start function
Support USB, RS485 monitoring function
WIFI remote monitoring (optional)
Compatible to generator
Support parallel operation up to 3 units (available for 3KW-5KW 48V)
This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Rated power: 1-5KW
Pure sine wave output
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
Bult in MPPT 60A/80A solar charge controller
Combining solar system, AC utility, and battery power source to supply
continuous power
Overload, short circuit and Deep discharge protection
Cold start function
Support USB, RS485 monitoring function
WIFI remote monitoring (optional)
Compatible to generator
This is a multi-function inverter/charger, combining functions of inverter, MPPT 60A/80A solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Rated power : 3KW
Pure sine wave solar inverter
Output power factor 1
Built-in 80A MPPT solar charger
Built-in anti-dust kit for harsh environment
WIFI remote monitoring (optional)
Compatible to generator
PV1800 VHM is a multi-functional inverter/charger, combining functions of inverter, solar charger and battery charger to offer uninterruptible power
support in portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current,
AC/solar charger priority, and acceptable input voltage based on different applications.
Smart LCD setting (Working modes, Charge Current, Charge Voltage, etc).
Built-in MPPT solar charge controller
MAX PV Array Open Circuit Voltage: 450V
Can provide the power to the load without battery
Combining solar system, AC utility, and battery power source to supply
continuous power
Overload, short circuit and Deep discharge protection
Cold start function
Support USB, RS485 monitoring function
Parallel operation with up to 3 units
WIFI remote monitoring (optional)
PV1800 PRO is a multi-function inverter/charger, combining functions of inverter, MPPT solar charger and battery charger to offer uninterruptible power support in portable size. PV1800 PRO Series can run without battery. The Maximum PV array open circuit voltage can reach 450V and MPPT voltage is 150~430Vdc, which Can help customers make full use of solar energy.
On grid / Grid-tied
Rated power: 4200W
No. of MPPT: 2
Strings per MPPT: 1
Phase: single phase
Warranty: 10 years
Dimension(W/H/D): 355*412*153mm
Net weight: 13.5kgs
LED display
The solar inverter takes full account of the needs of end customer, with excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied
Rated power: 5000W
No. of MPPT: 2
Strings per MPPT: 1
Phase: Three phase
Warranty: 10 years
Dimension(W/H/D): 500*428*200mm
Net weight: 21kgs
LED display
Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit.
The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life.
Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied
Rated power: 4600W
No. of MPPT: 2
Strings per MPPT: 1
Phase: single phase
Warranty: 10 years
Dimension(W/H/D): 355*412*173mm
Net weight: 14.5kgs
LED display
The solar inverter takes full account of the needs of end customer, with excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
108952 Solar Tracking System Suppliers
Short on time? Let Solar Tracking System sellers contact you.