Sodium carbonate (also named washing soda, soda ash and soda crystals, and in the monohydrate form as crystal carbonate), Na2CO3, is the water-soluble sodium salt of carbonic acid.
Pure sodium carbonate is white, odorless powder that is hygroscopic (absorbs moisture from the air). It has a strongly alkaline taste, and forms a moderately basic solution in water.
Soda Ash has number of uses. Glass manufacturing is the largest application for soda ash, in the form of containers, fiberglass insulation, commercial building, and automotive industries.
Three grades of soda ash produced:
1. Dense Soda Ash: is an anhydrous substance. It forms an important industrial chemical, and widely used in the manufacture of different products.
2. Light Soda Ash: widely used as a pH regulator/ buffering agent in multiple industrial processes.
3. Washing soda: is an anhydrous substance that is produced by combining light soda ash along with additional molecules of water. It is used in soaps and washing detergents to improve their cleaning properties.
Soda ash also used to clean the air and soften water. As environmental concerns grow, demand increases for soda ash used in the removal of sulfur dioxide and hydrochloric acid from stack gases. Chemical producers use soda ash as an intermediate to manufacture products that sweeten soft drinks (corn sweeteners), relieve physical discomfort (sodium bicarbonate) and improve foods and toiletries (phosphates).
Item Index high class Inspection result
Total alkali(quality fraction of na2co3 dry basis)% 99.2 99.45
Nacl (quality fraction of nacl dry basis)% 0.7 0.50
Fe quality fraction(dry basis)% 0.0035 0.0009
Sulphate(quality fraction of so4 dry basis)% 0.03 0.007
Water insoluble matter % 0.03 0.005
Conclusion: high class
Packing:In 25kg, 40kg, 1000kg
Loading quantity: 21mt/20'fcl
Soda ash light , Sodium Carbonate
Soda ash light 99.2%min.
Appearance: white powder or fine crystals
Total alkalinity (as Na2CO3 in dry base): 99.2% min.
Chlorides (NaCl): 0.70%max.
Sulphate (SO4): 0.03% max.
Iron (Fe2O3): 0.004%max.
Water insoluble matter: 0.04% max.
Ignition loss: 0.8% max.
Particle size 180um sieve Remaining: 70% min.
Packing: In plastic woven bags of 25/40/50/750/1000kgs net each.
Soda Ash Light, also known as Sodium Carbonate (Na2CO3), is a type of soda ash with a lower density than dense soda ash.
Characteristics
1. Density: Soda Ash Light has a density of around 0.5-0.6 g/cm�³.
2. Appearance: It is a white, odorless powder.
3. Purity: Typically has a purity of 99.2% or higher.
Applications
1. Glass manufacturing: Soda Ash Light is used as a flux to reduce the melting point of silica, making it easier to produce glass.
2. Detergent manufacturing: It is used as a builder in detergent formulations to enhance cleaning power.
3. Paper manufacturing: Soda Ash Light is used to improve the brightness and strength of paper.
4. Textile industry: It is used as a dye fixative and to improve the colorfastness of textiles.
12728 Soda Ash Light Sodium Carbonate Suppliers
Short on time? Let Soda Ash Light Sodium Carbonate sellers contact you.
Properties : white crystal powder, easily soluble in water, water solution is alkali. Easily absorbing moisture and co2 if exposing in the air.
Applications: mainly used in glass-manufacturing, chemical industry, metallurgy, paper, dye, synthetic washes and petrochemistry.
Packing :25kg/ 40kg/50kg/750kg pp woven bag with waterproof pe inner , two layers
Specifications standard : gb210.1-2004
Items : specification
First grade : specification
Second grade
Total alkalinity(as na2co3 in dry base) %99.2% min98.8% min
Chloride content(as nacl) %0.7% max0.9% max
Iron content(as fe in dry base) /%0.003% max0.0035% max
Sulphate content(as so4 in dry base) /%0.03% max0.03% max
Water insoluble matter /%0.03% max0.03% max
Loss on ignition a/ %0.5% max0.5% max
Soda Ash Light is also called Sodium Carbonate or Soda Carbonate.
Applications:
Production of detergents, chemicals, soaps, textile, pulp & paper, other sodium compounds and for casting industry, oil refineries , water treatment plant.
Properties : white crystal powder, easily soluble in water, water solution is alkali. Easily absorbing moisture and co2 if exposing in the air.
Applications: mainly used in glass-manufacturing, chemical industry, metallurgy, paper, dye, synthetic washes and petrochemistry.
Packing :25kg/ 40kg/50kg/750kg pp woven bag with waterproof pe inner , two layers
Specifications standard : gb210.1-2004
Items : specification
First grade : specification
Second grade
Total alkalinity(as na2co3 in dry base) %99.2% min98.8% min
Chloride content(as nacl) %0.7% max0.9% max
Iron content(as fe in dry base) /%0.003% max0.0035% max
Sulphate content(as so4 in dry base) /%0.03% max0.03% max
Water insoluble matter /%0.03% max0.03% max
Loss on ignition a/ %0.5% max0.5% max
Cosmetics & Pharmaceuticals
Food
Industrial & General
Potential Functions:
Anti Caking Agent
Buffering Agent
Leavening Agent
Raising Agent
Stabilizer
Potential Applications:
Adhesives Fertilizer Seasonings
Bakery Health Care Skin Care
Cereals Metal Finishing Snack Foods
Cleaning Chemicals Oral Care Water Treatment
Confectionary Personal Care
Dairy Ready Meals
True specific gravity 2.533 (20�°C), bulk density 0.90min. Easily soluble in water, Maximum solubility at 35.4�°C. The aqueous solution appears strong alkalinity. On exposure to air it easily absorbs moisture, carbon dioxide, and gradually forms sodium bicarbonate (caking soda).
Usage:
1.The manufacture of glass is one of the most important uses of sodium carbonate. When it is combined with silica (SiO2) and calcium carbonate (CaCO3) and heated to very high temperatures, then cooled very rapidly, glass is produced. This type of glass is known as soda lime glass.
2. Soda ash also is used to clean the air and soften water.
3. Manufacture of Caustic Soda and dyestuffs
4. metallurgy (processing of steel and extraction of iron etc),
5. (flat glass, sanitary pottery)
6. national defense (TNT manufacturing, 60% gelatin-type dynamite ) and some other aspects, such as rock oil refining, paper manufacturing, paint, salt refining, softening of hard water, soap, medicine , food and so on.
Light / Dense Soda Ash
Sodium Carbonate (Na2CO3), commonly known as Soda Ash, may well have been the third "industrial chemical" used by man; perhaps employed sometime after salt (NaCl) and lime (CaO).
Total Alkalinity (as Na2CO3) % by mass 99.0
Chloride (as NaCl) % by mass 0.30-0.40
Iron (as Fe2O3) % by mass â?¤0.005
Matter insoluble in water % by mass 0.08
Sulphates (as Na2SO4) % by mass 0.07
Bulk Density gm/liter (Light Ash) 540-630
Bulk Density gm/liter (Dense Ash) 950-1200
Soda ash light, also known as sodium carbonate, is a fine, white powder with a lower bulk density compared to soda ash dense. It is widely used in various industries due to its solubility and reactivity. Here are some of its key applications:
1- Detergents and Cleaning Products: Acts as a water softener and pH regulator.
2- Glass Manufacturing: Used in the production of flat glass and container glass.
3- Textile Industry: Helps in dyeing and finishing processes.
4- Water Treatment: Used to adjust pH levels and soften water.
5- Chemical Production: Serves as a raw material for producing other sodium compounds.
Sodium Carbonate or Soda Ash It is used to manufacture a variety of glass products such as container glass for packaging, float glass for buildings and automobiles, fiber glass for insulation, etc. in Soap and Detergent It is used as a filler, pH adjuster, agglomerate aid, and water softener to manufacture soaps and detergents. It is also used to prepare sodium silicate, in photograph development process as a pH regulator, swimming pools to neutralize the excess chlorine, brick industry as a wetting agent, processing non- ferrous metals, etc.
Soda ash light is very well suited for detergent and chemical applications. Sodium carbonate (Na2CO3) is widely used as an alkaline support and for pH regulation. It is also commonly used as a source of sodium and for water softening applications.
Items Specification
Sodium Carbonate (Na2Co3) %: Min 99.2
Chloride in terms of (NACL) %: Max 0.4
Iron (Fe+2) %: Max 0.002
Insoluble in water %: Max 0.1
Bulk Density, gr/cm3: 0.55- 0.65
Na2o %: Max 58
Particle Size 180UM Sieve Remaining: 70% Min
Supplier of High Quality Soda Ash (Sodium Carbonate) Light and Dense from Turkey and Dubai
Industrial Uses
Glass Manufacturing :
Sodium Carbonate is a key ingredient in the production of glass. It helps reduce the melting temperature of silica, making the process more energy-efficient. It is used in the manufacturing of flat glass, container glass, and other glass products.
Detergents and Soaps :
Soda ash acts as a builder in detergents, enhancing the effectiveness of the surfactants by softening the water. It is also used in the production of soap.
Water Treatment :
Soda ash is used to adjust the pH of water, making it less acidic. This is important in municipal water treatment plants and for maintaining the balance in swimming pools.
Pulp and Paper Industry :
Used in the pulping process to separate cellulose fibers and as a bleaching agent in paper production.
Chemical Manufacturing :
Soda ash is a raw material for the production of numerous chemicals, including sodium bicarbonate (baking soda), sodium silicate, sodium tripolyphosphate, and others.
Textile Processing :
Used in the dyeing and processing of cotton and other fabrics, soda ash helps to fix dyes to fibers and adjust pH levels in textile processes.
Metal Refining :
Soda ash is used in the extraction of metals such as copper, zinc, and lead from their ores.
Food Industry :
Used as a food additive (E500) to regulate acidity and as a leavening agent in baking.
Packing of Soda Ash Light and Dense
1250kg Jumbo bag
50kg bag
Soda Ash Dense, also known as Sodium Carbonate (Na2CO3), is a type of soda ash with a higher density than light soda ash.
Characteristics
1. Density: Soda Ash Dense has a density of around 1.0-1.1 g/cm�??�?�³.
2. Appearance: It is a white, odorless powder.
3. Purity: Typically has a purity of 99.5% or higher.
Applications
1. Glass manufacturing: Soda Ash Dense is used as a flux to reduce the melting point of silica, making it easier to produce glass.
2. Detergent manufacturing: It is used as a builder in detergent formulations to enhance cleaning power.
3. Paper manufacturing: Soda Ash Dense is used to improve the brightness and strength of paper.
4. Water treatment: It is used to remove impurities and soften water.
Soda ash
Sodium carbonate in scientific name, soda soda in common name, stone alkali, washing alkali, chemical formula Na2CO3, belonging to In salts, sodium carbonate containing ten crystal water is colorless crystal, crystal water is unstable, easy to weathering,
It becomes a white powder Na2CO3, a strong electrolyte, with salt connectivity and thermal stability, easily soluble water, its aqueous solution is basic.
Soda ash, also known as sodium carbonate, is a versatile chemical compound with various industrial applications. It is primarily used in the production of glass, detergents, and various chemicals. Soda ash plays a crucial role in lowering the melting point of silica in glass manufacturing, making it an essential ingredient in the glass industry. Additionally, it is a key component in the formulation of laundry and dishwashing detergents, aiding in the removal of grease and stains. Its alkaline properties also make it valuable in water treatment processes and as a pH regulator in various chemical processes. Overall, soda ash is a fundamental chemical compound with wide-ranging uses in both consumer and industrial products.
12728 Soda Ash Light Sodium Carbonate Suppliers
Short on time? Let Soda Ash Light Sodium Carbonate sellers contact you.
