Please click here to check who's online and chat with them.

Find Verified Sjcy D Crawler Diesel Hydraulic Drilling Rig Suppliers, Manufacturers and Wholesalers

Jul-19-25

Sjcy-D Crawler Diesel Hydraulic Drilling Rig, 1

$60.00K - $65.00K / Box (CIF)
MOQ: Not Specified
 
1.Introduction to SJCY-D Crawler Diesel Hydraulic Drilling Rig
SJCY-D crawler diesel hydraulic water well drilling rig is a hydraulic drilling rig developed and widely promoted by Shandong Master Group. It is suitable for drilling in soil layer, quicksand layer and a small amount of rock and soil layer. It is mainly used for drilling civil draft wells, ground source heat pump air conditioning wells, engineering dewatering wells, drought-resistant wells, industrial wells, etc.â??
2.Features of SJCY-D Crawler Diesel Hydraulic Drilling Rig
2.1 The diesel engine is equipped with electric starting, which is convenient to start and reduces the labor intensity of the operator.
2.2 The drilling rig adopts hydraulic working principle and is equipped with radiator, so the drilling rig can work continuously and efficiently.
2.3 Equipped with high-power hydraulic motor, the power head can rotate forward and backward.
2.4 The drill frame is equipped with hydraulic oil cylinder, and the oil pressure can be raised and lowered through the operating handle.
2.5 The drilling rig has its own water pump, which has reasonable structure, compact layout and good slag removal effect.
2.6 Equipped with rubber steel wire tracks, it is easy to move, and it will not hurt the road surface when walking on urban roads.
Jun-28-25
 
SJCY-D Crawler Diesel Hydraulic Drilling Rig

1 Introduction of SJCY-D Crawler Diesel Hydraulic Drilling Rig
SJCY-D crawler diesel hydraulic water well drilling rig is a hydraulic drilling rig developed and widely promoted by Shandong Master Group. It is suitable for drilling in soil layer, quicksand layer and a small amount of rock and soil layer. It is mainly used for drilling civil draft wells, ground source heat pump air conditioning wells, engineering dewatering wells, drought-resistant wells, industrial wells, etc.
2 Features of SJCY-D Crawler Diesel Hydraulic Drilling Rig
2.1 The diesel engine is equipped with electric starting, which is convenient to start and reduces the labor intensity of the operator.
2.2 The drilling rig adopts hydraulic working principle and is equipped with radiator, so the drilling rig can work continuously and efficiently.
2.3 Equipped with high-power hydraulic motor, the power head can rotate forward and backward.
2.4 The drill frame is equipped with hydraulic oil cylinder, and the oil pressure can be raised and lowered through the operating handle.
2.5 The drilling rig has its own water pump, which has reasonable structure, compact layout and good slag removal effect.
2.6 Equipped with rubber steel wire tracks, it is easy to move, and it will not hurt the road surface when walking on urban roads.
3 Parameters of SJCY-D Crawler Diesel Hydraulic Drilling Rig
Model SJCY-D
Machine power Single cylinder diesel engine/22 HP
Chassis Rubber crawler hydraulic walking chassis
Vehicle weight 950kg
Overall machine size 2000*1100*2100mm
Power head BM5-200 Hydraulic Motor
Pressurized system Hydraulic cylinder booster
Outrigger Four screw legs
Drill pipe specifications 50*1500mm
Drilling diameter 80-300mm
Drilling depth 0-120m
Slide travel 2400mm
Lift height 2600mm
One-time advancement length 1500mm
Note: Products are constantly being improved. Any changes will not be notified separately. Please refer to the actual product.

HJD Horizontal Mountain Spring Well Water Drilling Rig

1 Introduction of HJD Horizontal Mountain Spring Water Well Drilling Rig
HJD horizontal spring water well drilling rig adopts modular design, which is composed of main machine, slide way, distribution board, water gas bottle, etc., with reasonable layout and compact structure. In order to further facilitate mobile handling, the main machine can continue to be disassembled into rotary part, propulsion part and main machine base, and the slide way can continue to be disassembled into guide rail, wire rope tensioner and drilling tool support frame. The main machine of the drilling rig adopts the principle of water and gas combination of pneumatic drilling and wet slag removal, which can be used in conjunction with the long-stroke slide to realize the horizontal drilling of mountains. The drilling rig has been widely used in horizontal drilling and mountain horizontal drilling.
GOLD Member
Mar-04-25
Supplier From Busan, South Korea (Republic Of Korea)
 
The SD1000 Full Hydraulic Core Drilling Rig is a robust piece of equipment designed for various drilling applications Lets dive into the details
Application Range The SD1000 crawler drill is primarily used for both diamond bit drilling and carbide bit drilling Its commonly employed in geological exploration mineral prospecting and core sampling
Specifications
Drilling Diameter 56 mm 71 mm 89 mm 114 mm 2 in 3 in 4 in 4 in
Drilling Depth 200 m 400 m 600 m 1000 m 65602 131204 196806 328010
Overall Length Working 5760 mm 227 in
Overall Width Working 2400 mm 94 in
Overall Height Working 9000 mm 354 in
Hole Range 65 89mm
Engine Power 156ps 115kw 2200rpm
Machine Weight 12400 kg 273373 lb
Motor Power 132 kW 17947 hp
GOLD Member
VERIFIED
Nov-30-24

En590 10Ppm Ulsd

$1
MOQ: Not Specified
Supplier From Singapore, Singapore
 
En590 10ppm Diesel
Vopak-to-vopak Procedure:
1- Buyer Sends Cis + Cp
2- Conference Call /meeting Between Buyer & Seller Where Both The Parties Exchanges
Vopak Tank Coordinates
3- Seller Release Ci, Buyer Counter Signs
4- Seller Releases Full Pop With Fresh Sgs Report
5- Buyer Makes Full Payment Via Mt 103
6- Seller Transfers Title To Buyer
7- Buyer Pays Commission To Intermediaries
8- Seller Issues Spa Contract For 12 Months
Platts {-} Minus 50 U$d Nwe And U$d 10.00 Commission Payable By The Buyer. Hence Net Cost To
The Buyer Will Be Nwe Platts {-} Minus 40 U$d
Product: En590-10ppm
Quantity: 100,000 Mt
Availability: Fob Rotterdam {vopak Tank/s}
Monthly Deliveries In Annual Contract
Conditions: Ncnda { Attached} And Intermediary Services CONTRACT {ATTACHED} will be signed
by the Buyer once their CIS + CP is accepted by the Seller.
GOLD Member
VERIFIED
Jun-11-25

En590 10Ppm Ulsd For Sts/tto, Export Grade

$470 - $470 / Metric Ton (FOB)
MOQ: Not Specified
Supplier From Singapore, Singapore
 
Vessels for TTO/STS EN590 available on regular basis
TERMS OF NEGOTIATION
INCOTERMS: TTO/STS
ORIGIN: EUROPEAN
INSPECTION: SGS, IQS,CIQ OR SIMILAR
INSURANCE: PAID BY SELLER, COVERING 110% OF SHIPMENT VALUE
ACCEPTABLE PAYMENT TERM: MT103/TT WIRE/USDT
COMMODITIES:
DIESEL FUEL EN590 USLD-10PPM/50PPM/500PPM GASOLINE
MINIMUM QUANTITY: 50,000 MT per Month
MAXIMUM QUANTITY: 400,000 MT Per Month
TTO/STS PRICE: USD $470 PER MT GROSS / USD 460 PER MT Net
NON-NEGOTIABLE TITLE/TANKER TAKE OVER PROCEDURE (TTO)/ SHIP
TO SHIP (STS)
1.The Buyer shall issue an Irrevocable Corporate Purchase Order (ICPO),
accompanied by the company's registration certificate and a Guarantee Letter confirming its intention to assume legal title of the product.
2.The Seller shall prepare and submit a draft Memorandum of Understanding
(MOU) to the Buyer. The Buyer shall review, countersign, and return the
executed MOU to the Seller.
3. Upon receipt of the countersigned MOU, the Seller shall provide the Buyer
with the following documentation for verification and confirmation:
A. Vessel Declaration
B. Bill of Lading
C. Loadline Report (Ullage Report)
D. Q&Q Analysis Report at Loading Port
E. Payment Invoice for Title Transfer Approval
F. Cargo Manifest
4. Upon verifying that the submitted documents, Buyer shall proceed to remit
the statutory governmental fee for Ttitle Transfer Approval in the amount of 95,000 via T/T wire transfer within two (2) international banking days. This
amount shall be deducted from the final purchase price.
5. If vessel rerouting is required, Buyer shall authorize the shipping company to
redirect the vessel to the Buyer's preferred port of discharge. The Seller shall
complete the transfer of product title to the Buyer through the relevant
governmental authority and shall issue the following documents to the Buyer:
Freshly dated Dip-Test Authorization (DTA)
Authority to Board (ATB)
Authority to Verify (ATV)
The Buyer shall then appoint SGS or an equivalent inspection agency to carry out the Q&Q analysis.
6. Upon successful completion of the dip test and once the vessel/tanker is
securely moored at the designated dock, the Buyer shall remit the remaining
balance of the purchase price via MT103 wire transfer. Following confirmation
of payment, the Seller shall issue the official Certificate of Ownership to the
Buyer, thereby finalizing the legal transfer of title. Trans-loading shall begin
immediately thereafter.
7. Trans-loading operations shall commence without delay upon confirmation of payment and title transfer.
8. The Seller shall release commissions and any agreed payments to intermediaries involved in the transaction within forty-eight (48) hours of receipt of full payment from the Buyer's bank.
7. Trans-loading commence immediately.
8. Seller will release payments to the intermediaries involved within 48 hours of receiving the Payment for the product from the Buyer's bank.
5694 Sjcy D Crawler Diesel Hydraulic Drilling Rig Suppliers
Short on time? Let Sjcy D Crawler Diesel Hydraulic Drilling Rig sellers contact you.
GOLD Member
Jul-28-17

Guar Gum

MOQ: Not Specified
Supplier From Mumbai, Maharashtra, India
 
Guar Gum Types

Food, Feed & Pharma Grades
- Various particle sizes (very coarse to very fine).
- • Various hydration rates (very slow to very fast).
- • Various viscosities (1% solution in water = 50 cps to 7000 cps).
- • Special deodourised grades.
- • Special low microbiological count grades.
Technical Grades
Straight Guars:
- Various particle sizes (very coarse to very fine).
- Various hydration rates (very slow to very fast).
- Various viscosities (1% solution in water = 50 cps to 8000 cps).
- Special good Dry-Flow (Free-Flow) Guars.
- Special Anti-Dusted Guars.
Modified Guars and Guar Derivatives:
- Fast hydrating / High Viscosity / Diesel Slurriable (particularly suitable for oil, gas and other deep well drilling and EOR operations like polymer flooding / fracturing),
- Borated.
- Reticulated.
- Oxidised.
- Depolymerised.
- High water absorbance capacity.
- Carboxymethyl (Anionic).
- Hydroxypropyl (Nonionic).
- Hydroxypropyltrimethyl chloride (Cationic).
- Hydroxypropyltrimethyl chloride Hydroxypropyl (Cationic, double derivative).
- Special good Dry-Flow (Free-Flow) Modified Guars / Guar Derivatives.
- Special Anti-Dusted Modified Guars / Guar Derivatives.

Guar gum is a fiber from the seed of the guar plant.
Guar gum is used as a laxative. It is also used for treating diarrhea, irritable bowel syndrome (IBS), obesity, and diabetes; for reducing cholesterol; and for preventing “hardening of the arteries” (atherosclerosis).
In foods and beverages, guar gum is used as a thickening, stabilizing, suspending, and binding agent.
In manufacturing, guar gum is used as a binding agent in tablets, and as a thickening agent in lotions and creams.
How does it work?
Guar gum is a fiber that normalizes the moisture content of the stool, absorbing excess liquid in diarrhea, and softening the stool in constipation. It also might help decrease the amount of cholesterol and glucose that is absorbed in the stomach and intestines.
There is some interest in using guar gum for weight loss because it expands in the intestine, causing a sense of fullness. This may decrease appetite.
USES:
Diarrhea. Adding guar gum to the tube feeding formula given to critical care patients may shorten episodes of diarrhea from about 30 days to about 8 days.
High cholesterol. Taking guar gum seems to lower cholesterol levels in people with high cholesterol. Guar gum and pectin, taken with small amounts of insoluble fiber, also lower total and “bad” low-density lipoprotein (LDL) cholesterol, but don't affect “good” high-density lipoprotein (HDL) cholesterol or other blood fats called triglycerides.
Diabetes. Taking guar gum with meals seems to lower blood sugar after meals in people with diabetes. By slowing stomach emptying, guar gum may also lessen after-meal drops in blood pressure that occur frequently in people with diabetes.
Constipation.
Irritable bowel syndrome (IBS).
GOLD Member
VERIFIED
Apr-24-25

En590 10Ppm Ulsd, Export Grade

$1 - $1 / Metric Ton (FOB)
MOQ: 50,000  Metric Tonnes
Supplier From Singapore, Singapore
 
EN590 10ppm ULSD Diesel available. Vessel to Tank transaction in Jurong port Singapore.No upfront payment.
VTT price $460/MT including $10 commission to buyer's side.
1. Buyer send ICPO with TSA
2. Seller issue CI
3. Seller sends to Buyer the following documents for Buyer's confirmation.
A. Q88
B. Bill of Lading
C. Estimated Time of Arrival E.TA.
D. Q&Q Analysis Report by IQS at loading Port.
E. Ullage/load line report
F. Cargo Manifest.
4. Buyer receives documents and sends Tank Storage Receipt for injection of
product to buyers tanks.
5. Seller injects products to buyers tanks and Buyer order SGS or Equivalent
inspection team for Q&Q inspection.
6. Upon the successful completion of Dip-test inspection, Buyer makes payment
by MT103 wire transfer for the total goods value, Seller transfers Title of ownership Certificate to buyer's name as the legitimate owner of the goods.
7. Seller will release payments to the intermediaries involved within 48 hours of receiving the Payment for the product from the Buyer's bank.
GOLD Member
Nov-28-22
Supplier From Verona, VR, Italy
GOLD Member
VERIFIED
Jun-28-21
Supplier From Faridabad, Haryana, India
 
We are supplier and exporter of Industrial Salt.

In Textile industry, industrial salt as dye-enhancer for textiles is used during the manufacture, processing and refining of fabrics and materials, such as for example, dying cotton or the printing of materials. Industrial salt as dye-enhancer for fabrics ensures that the color fully penetrates the fabric and is better bound and looks after the corresponding dyeing process.

Industrial salt is used in the oil industry for drilling rig, pharmaceutical industry in making capsules, in textile, metal, FMCG, paper and leather industries.
GOLD Member
VERIFIED
Mar-06-25
Supplier From Singapore, Singapore
 
Product: Jet A1 fuel
Origin: Kazakhstan
QTY: Trial 2million BBL Followed by any qty per month X 12months contract.

Product: Diesel fuel EN590 10PPM
Origin: Kazakhstan
QTY: Trial 100,000. MT Followed by any qty per month X 12months contract.

FOB TRANSACTION PROCEDURES FOR TANK TO TANK DIP& PAY

1) Buyer issue ICPO containing the seller's working procedure and banking details along with company registration
certificate, buyer data page of buyerâ??s Passport with buyerâ??s Nominated TSA for refinery verification and approval.
2) Seller issues commercial invoice (C.I.), buyer signs and return commercial invoice along with an acceptance letter.
3) Seller issues a copy of SGS Report to buyer's Tank Farm Company only to verify SGS Report with a Confidentiality &
Non-Circumvent letter.
4) Upon confirmation of SGS Report by Buyer's Tank Farm Company, Seller request to leases and pays the buyerâ??s tank
for 2 days, and Buyer pays his Tank Farm Company for 3 days after Tank Farm Company confirms the payment from
Seller. A total (5) days of operational TSR will be issued on seller/buyers name for a minimum of XXXX to XXXX GALS /
BBLS / MT.
5) Sellerissuesfollowing POP documentsto buyer:
A. Q&QReport
B. Pre Injection Report(Fromrefinery reservoir to leased tanks)
C. Unconditional Dip test authorization letter (DTA)
D. Authorization to sell
E. FreshUpdate SGS Report
F. Certificate ofOrigin
G. Authorization to verifyphysically the productin seller's tank(ATV)
6) Buyer and his testing teams conducts Dip test on the product and injection commence from seller's tank to buyer's
tank.
7) Upon completion of injection, seller issues full Injection reportto buyer and buyer makes 100% payment via MT103
for the total value of product injected into the tanks.
NOTE: The refinery will provide NCNDA/IMFPA immediately after step No.4 of the procedure.
GOLD Member
VERIFIED
Jun-28-21

Jet Fuel

MOQ: Not Specified
Supplier From Faridabad, Haryana, India
 
Product Description Additives Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 Combustion properties Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min - max result test - ip method ASTM Composition.

Available products: JET A1/JP54, CRUDE OIL, BLCO, REBCO, SLCO, D2, D6, BIODIESEL, EN590, DIESEL 10PPM & 50PPM, BITUMEN, MAZUT M100, Copper. Safe procedure and long-term cooperation - that is our motto.
Feb-20-19
 
Characteristics of XYD-200 crawler hydraulic core drilling rig
·drilling rig uses automatic Telescopic drilling rig ,it uses two high-strength cylinders to support.There is a group of hydraulic valves to control super nation of drill tower so that it saves time and effort, safe and reliable when user operates, the maximum for the user to create benefits.
·the chassis uses a rubber belt track so that the weight is light,the cost of life cycle is lower.It can reduce noise of the vehicle walking mechanism,reduce car bodyï¼?s shake,reduce the oil consumption.It can walk on the pavement of city and donï¼?t hurt the pavement.
·the chassis comes with four high-strength threaded legs(or Hydraulic high leg) the threaded legs install rate and adjust is fast and convenient, can be used for work plane leveling.It can make loading and unloading reduce the cost of to improve efficiency.It also can be used as auxiliary support when the track drilling rig is working.
·using 48V electric starting diesel engine is reduced the operateï¼?s labour intensity greatly.Especially in cold season,when diesel engine start hardly,it will show superiority vastly.
·the machine is equipped with BW-160 independent mud pump,the pump flow and pressure are big,the maintenance is convenient,the parts of the machine are convenient to buy all over the country.
2. Technical parameters of XYD-200 crawler hydraulic core drilling rig
XYD-200 crawler hydraulic core drilling rig
Drilling depth 200m
Maximum opening diameter 75-300mm
Final hole diameter 75mm
Kelly 53/59*4200mm
Drill pipe diameter 50/60mm
Drilling angle 90°-75°
Auxiliary power diesel engine 16.2kw 2200r/min
Structural weight/Size 3000kg 3800*1950*2700
Spindle
Spindle speed 64/128/287/557r/min
Spindle stroke 450mm
Windlass
Single rope lifting force 24kn
Single rope lifting speed 0.12/0.22/0.49/0.95m/s
Drum diameter 140mm
Wire rope diameter 13mm
Wire rope capacity 35m
Derrick
Rated load 5t
Effective height 6m
Tower leg specification 89mm
Feb-20-19
 
Characteristics of XYD-44A crawler hydraulic core drilling rig
XYD-44A crawler hydraulic core drilling rig is a multi-purpose spindle well drilling rig suitable for high-speed medium and deep borehole drilling in complex rock formation. HuaxiaMaster well drilling rigs covers all the main foundation and drilling technologies with a range of models whose characteristics, capability and performance find application in every operating condition.
2. Applications of XYD-44A crawler hydraulic core drilling rig
·Hydraulic core drilling rig ,
·engineering well drilling ,
·hydrology and water well drilling
·large diameter foundation piles construction
3. Parameters of XYD-44A crawler hydraulic core drilling rig
XYD-44A crawler hydraulic core drilling rig
Drilling depth 600-1400m
Max open hole caliber 300mm
End hole caliber 75mm
Drilling rod diameter 60mm
Drilling angle 90-65
Drill rig moving stroke 450mm
Spindle 

Spindle speed ( Diesel Engine) Forward 60 97 169 187 276 301
284 487 521 847 1180 1490r/min
Reverse 65 201r/min

Spindle speed ( Electric Motor) Forward 50 81 141 155 230 251
320 406 434 706 984 1247r/min
Reverse 54 167r/min
Spindle stroke 600mm
Spindle max. pressure force 90kn
Spindle inner diameter 96mm
Lifting capacity 120kn
Main hoist 
Max.single line lifting capacity 45kn
Max.single line lifting speed 0-45m/s 
Wire rope caliber 17.5-18.5mm
Hoist capacity of wire line 90-110m
Roller diameter 140mm
Wirerope diameter 6mm
Wire rope length 450m
Mud pump
Type BW-250
Displacement 250 l/min
Work pressure 80kg/cm²
Water inlet pipe diameter 75 mm
Water outlet pipe diameter 50 mm
Power
Diesel engine YC4E135-1 81KW
Electric motor Y225S-4   37KW
GOLD Member
Jul-06-23
Supplier From Faridabad, Haryana, India
Jun-27-19
 
1. Characteristics of XYD-3 crawler hydraulic core drilling rig
XYD-3 crawler hydraulic core drilling rig is mainly used for geological general investigation and exploration,road and tall building foundation exploration,kinds of hole in concrete structure,river levees,subgrade grouting hole drilling and direct grouting,civil wells and earth temperature central air-conditioner,ect. 
·The drilling rig is equipped with crawler chassis device, which is easy to move with fast speed.
·The crawler device is made of resistant steel mill.
·Hydraulic oil pressure feed device, which improves drilling efficiency.
·Pressure gauge displays the condition of the bottom of the drill hole.
·Drill mast controlled by hydraulic cyliner so it improves the efficiency.
·Diesel engine adopts the electric starter to reduce the labor usage.
2. Parameters of XYD-3 crawler hydraulic core drilling rig
Drilling depth 600m
Max. open hole caliber 300mm
End hole caliber 75mm
Drilling rod diameter 60mm
Drilling angle 90°-75°
Spindle 
Spindle forward speed 30-1050r/min
Spindle reverse speed 29-137r/min
Spindle stroke 600mm
Spindle inner diameter 96mm
Main Winch
Single line lifting speed 0.5/0.9/1.4/1.9m/s
Diameter of wire rope 12.5mm
Brake width 90mm
Drum diameter 300mm
The biggest single rope hoisting capacity 30kn
Mud pump
Type Horizontal triples BW-250 Mud Pump
Displacement 250 l/min
Water inlet diameter 75mm
Water outlet diameter 50mm
Power
Diesel engine 38kw
Electric motor Y180L4 22KW
Weight 6500kg
Size 2500*900*1800mm
Jun-27-19
 
1. Characteristics of XYD-200 crawler hydraulic core drilling rig
·drilling rig uses automatic Telescopic drilling rig ,it uses two high-strength cylinders to support.There is a group of hydraulic valves to control super nation of drill tower so that it saves time and effort, safe and reliable when user operates, the maximum for the user to create benefits.
·the chassis uses a rubber belt track so that the weight is light,the cost of life cycle is lower.It can reduce noise of the vehicle walking mechanism,reduce car bodyï¼?s shake,reduce the oil consumption.It can walk on the pavement of city and donï¼?t hurt the pavement.
·the chassis comes with four high-strength threaded legs(or Hydraulic high leg) the threaded legs install rate and adjust is fast and convenient, can be used for work plane leveling.It can make loading and unloading reduce the cost of to improve efficiency.It also can be used as auxiliary support when the track drilling rig is working.
·using 48V electric starting diesel engine is reduced the operateï¼?s labour intensity greatly.Especially in cold season,when diesel engine start hardly,it will show superiority vastly.
·the machine is equipped with BW-160 independent mud pump,the pump flow and pressure are big,the maintenance is convenient,the parts of the machine are convenient to buy all over the country.
2. Technical parameters of XYD-200 crawler hydraulic core drilling rig
XYD-200 crawler hydraulic core drilling rig
Drilling depth 200m
Maximum opening diameter 75-300mm
Final hole diameter 75mm
Kelly 53/59*4200mm
Drill pipe diameter 50/60mm
Drilling angle 90°-75°
Auxiliary power diesel engine 16.2kw 2200r/min
Structural weight/Size 3000kg 3800*1950*2700
Spindle
Spindle speed 64/128/287/557r/min
Spindle stroke 450mm
Windlass
Single rope lifting force 24kn
Single rope lifting speed 0.12/0.22/0.49/0.95m/s
Drum diameter 140mm
Wire rope diameter 13mm
Wire rope capacity 35m
Derrick
Rated load 5t
Effective height 6m
Tower leg specification 89mm
GOLD Member
Sep-15-23

Diesel

$1
MOQ: Not Specified
Supplier From Verona, VR, Italy
 
Diesel EN590 10PP
Jet fuel A1
Apr-08-20
 
Hydraulic Drilling Rig Features


JK590C / JK590 are the new generation of diesel (electric) crawler mounted hydraulic DTH drilling rig, the latest updated version of JK590 series.

In contrast with the last generation, they feature lower operation cost and humanized design.

They adopt a 70kW Yuchai diesel engine and hydraulic pump station assembly to generate power to rotate, feed, lift, walk and angle position.

During operation, only the percussive hammer consumes the compressed air. In contrast with conventional pneumatic drill rigs, JK590C/JK590 crawler drilling rig consume about 40% to 50% less energy (diesel or electricity), and the air displacement of matched air compressor decreases 30% to 50%.

Compared with JK590, JK590C is additionally equipped with hydraulic dust collection system, and wet type dust collector is optional if water is accessible on site.

JK590C/JK590 are mainly applicable to blast hole drilling process of hydropower construction, open pit mining, quarrying, road construction and national defense construction.





Hydraulic Drilling Rig Technical Parameters






Model JK590
Borehole diameter 90-165mm
Borehole depth 50m
Applicable rock hardness f=6-20
Working air pressure 1.2-2.4MPa
Air consumption 11-21m³/min
Feeding stroke 4138mm
Rod-changing length 3m
Max. horizontal drilling height 3370
Rotation rate 0-80rpm
Rotation torque 3000Nm
Walking speed

2Km/h, 3Km/h
Grade ability 24°
Power Yuchai 70KW/Cummins 74KW (optional)
Electric motor 45KW
Dust collector (optional) Hydraulic dry dust collector
Wet dust collector
Dimension (LxWxH) 7000mm x 2200mm x 2100mm
Weight 6500kg




The crawler drilling rigs are widely used in blasthole drilling of mining, hydropower, transportation and defense projects, as well as harbor and channel construction; The hydraulic drilling rigs are specialized in drilling the boreholes of large diameter and depth, for instance, water well drilling and geothermal well drilling.
Jul-10-19
 
Crawler Mounted Hydraulic DTH Drilling Rig
Crawler Mounted DTH Drill Rig, Crawler Mounted Drilling Rigs
Low operation cost and humanized design.

Borehole Diameter
90-165mm

Site Condition
It is applicable to the blast hole drilling process of hydro project, open pit mining, quarrying, road construction and defense project.
Product Features
JK590C / JK590 are the new generation of internal combustion (electric) crawler mounted hydraulic DTH drilling rig, the latest updated version of JK590 series. 
In contrast with the last generation, they feature lower operation cost and humanized design. 
They adopt a 70kW Yuchai diesel engine and hydraulic oil pump station assembly to generate power, allowing rigs to rotation, propelling, lifting, walking and angle positioning. 
During operation, only the percussive hammer consumes the compressed air. In contrast with conventional pneumatic drill rigs, JK590C/JK590 consume about 40% to 50% less energy (oil or electricity), and the air displacement of matched air compressor decreases 30% to 50%. 
Compared with JK590, JK590C is additionally equipped with dust collection system, and wet type dust collector is optional once water is accessible on site. 
JK590C/JK590 are mainly applicable to blasting borehole drilling process of hydro project, open pit mining, quarrying, road construction and defense project.

Model JK590
Borehole diameter 90-165mm
Borehole depth 50m
Applicable rock hardness f=6-20
Working air pressure 1.2-2.4MPa
Air consumption 11-21m³/min
Feeding stroke 4138mm
Rod-changing length 3m
Max. horizontal drilling height 3370
Rotation rate 0-80rpm
Rotation torque 3000Nm
Travle speed 2Km/h, 3Km/h
Grade ability 24°
Power Yuchai 70KW/Cummins 74KW (optional)
Electric motor 45KW
Dust collector (optional) Hydraulic dry dust collector
Wet dust collector
Dimension (LxWxH) 7000mm x 2200mm x 2100mm
Weight 6500kg
Jul-10-19
 
JK520 Crawler Mounted Hydraulic DTH Drilling Rig
Crawler Mounted Hydraulic DTH Drilling Rig
Crawler Mounted Drilling Rigs, Crawler Mounted DTH Drill Rig
It features its compact design, small footprint, and humanized operation.
Borehole Diameter
90-150mm
Site Condition
It is applicable to the blasting borehole drilling process of hydro project, open pit mining and road construction.
Product Features
JK520 internal combustion (electric) crawler mounted hydraulic DTH drilling rig is the latest updated product of the "Sharp Sword" series, specially designed for the hydropower project and quarry mining project. 
JK520 can drill boreholes of various angles, ranging from horizontal angle to vertical angle. It boasts its better performance, compact design, small footprint and humanized operation.
JK520 is equipped with environment-friendly dry type dust collector, and as long as water is accessible on working site, wet type dust collector is optional.

Model  JK520
Borehole    diameter 90-150mm
Borehole    depth 40m
Applicable    rock hardness f=6-20
Working air    pressure 1.2-2.4MPa
Air    consumption 11-21m³/min
Feeding    stroke 3865mm
Rod-changing    length 3m
Max.    horizontal drilling height 2510mm
Feed    extension 1200mm
Ground    clearance 300mm
Rotation rate 0-79rpm
Rotation    torque 2500Nm
Travle speed 2Km/h, 3Km/h
Grade ability 25°
Power Yuchai    70KW
Dust collector (optional) Hydraulic dry dust    collector
Wet dust collector
Dimension    (LxWxH) 7000mmÃ?2250mmÃ?2250mm
Weight 5800kg
Wired remote    control Optional
5694 Sjcy D Crawler Diesel Hydraulic Drilling Rig Suppliers
Short on time? Let Sjcy D Crawler Diesel Hydraulic Drilling Rig sellers contact you.
Explore Sjcy D Crawler Diesel Hydraulic Drilling Rig related import export discussions