Silway 714 water repellent is a water-dilutable solution of potassium methyl siliconate designed to impart water repellency to a wide variety of surfaces. Supplied at a concentration of 42 percent in water.
Silway 714 water repellent reacts with carbon dioxide in the air to form am insoluble water-resistant treatment within 24 hours.
KEY FEATURES:
* Reduce water absorption into the substrate, thus reducing spalling due to freeze-thaw and efflorescence, thereby increasing the life of the substrate.
* Colorless and non-yellowing protection preserves the natural appearance of the substrate.
Potassium methyl siliconate (Aquarest WR 100) is an aqueous solution of Potassium methyl Siliconate, Water dilutable. It provides water repellent properties by reaction with atmospheric carbon dioxide.
Silane Siloxane Base coat (Aquarest WR 1000) It is suitable for coating painted surfaces too, as this does not impart any color change to the substrate. Forms an excellent weather coat for all types of cement and stone surfaces.
Reactive Silicone based (Aquarest 1200) is a solvent soluble fast curing reactive silicone, used for imparting a colorless water repellent surface finish for variety of industries.
Reactive Silicone emulsion (Aquarest 1300) is reactive Fluid emulsion water soluble especially designed for treating substrates to impart and improve water repellent properties.
Silane based water soluble (Aquarest WR 1100) is a solvent less, water- soluble, Silane Siloxane Emulsion. Dilute solutions of SS WR 1100 serve as general-purpose water repellents for impregnating and priming mineral surfaces.
Rust remover and Protective lubricant (SS WRC) is a speciality silicone lubricant for rust loosener and remover, water repellent for metal and also used for protection from corrosion.
Anti-allergic
Ultrasonic seam
Soft nose Barrett
Latex and fiberglass free
Single use only
Packing: 50 pcs/box, 2.000 pcs/carton
3-PLY DISPOSABLE FACE MASK STRUCTURE
1st Layer: Water-repelling, non-woven fabric. Prevents droplet and spray penetration.
2nd Layer: Electrostatic-induced melt-blown polypropylene, blocks dust and microbes (>99%).
3rd Layer: Fine bicomponent (PP/PE) fabric, absorbs moisture and provides soft and non-sticky feel.
Silway 744 is a water-thinnable, solventless emulsion, based on mixture of silane and siloxane.
Dilute solutions of Silway 744 serve as highquality, general-purpose water repellents for impregnating and priming mineral surfaces.
Moreover Silway 744 can be used for the mass treatment of non-load bearing concrete products.
Dilute Silway 744 is an excellent water repellent for many absorbent mineral substrates, such as bricks, sand-lime brick, natural sandstone and mineral plasters. It is not so suitable for less absorbent, dense natural stone, especially limestone, marble and reinforced concrete for bridges and roads.
Owing to its aqueous consistency and storage stability when diluted, Silway 744 is ideal for inplant impregnation of building materials made of clay, aerated concrete, sand-lime brick, fibrous cement, mineral fibers and lightweight aggregate.
Features:
* Good depth of penetration
* Resistance to alkalis
* Rapid development of water repellency
* Provides good adhesion for paints
* Water based and environmentally friendly
* Stable in storage, even when diluted
2820 Silicone Water Repellent Silway 714 Suppliers
Short on time? Let Silicone Water Repellent Silway 714 sellers contact you.
Wearing a mask is a fashion unique, inspires imagination, cultivates the creative spirit, improves school or company image, and dresses stylishly and effectively to prevent covid-19.
1. Type: Diamond shape, 3-ply, non-sterile
2. Size: M, L
3. Color: as photo
4. Outer Layer: Water-repellent non-woven
5. Middle Layer: High level static filtration non-woven
6. Inner Layer: Microfilter Thermal-bond non-woven
7. Nose band: PE iron wire
Features
Suitable for OR, ER, patient care area, oral, dental procedure, clinics, isolation, IC practices, patients and other applications.
3-ply, non-woven material, 99% BFE at 3 micron.
1. Type: Flat shape, 3-ply, non-sterile
2. Size: For kids
3. Color: Green, blue, pink, white
4. Outer Layer: Water-repellent non-woven
5. Middle Layer: High level static filtration non-woven
6. Inner Layer: Microfilter Thermal-bond non-woven
7. Nose band: PE iron wire