Please click here to check who's online and chat with them.

Find Verified Shoo In Sh Steelmaking Arc Furnace Sh 0 5 Suppliers, Manufacturers and Wholesalers

Feb-11-17
 
SH steelmaking arc furnace
 
Usage :
Steelmaking electric arc furnace inputs electric energy into furnace by graphite electrode. Electric arc 
producing between electrode  tips and furnace burden is used as heat source to smelt steel. The heat source of electric arc furnace is 
electric energy. Atmosphere inside the furnace can be adjusted, which is helpful to melt steels containing easier oxidation of elements.
SH series three-phase steelmaking arc furnace is used to smelt high-quality carbon steel and all kinds of ferro-alloy steel. The designed 
volume is from 0.5-150t. And the rate power of transformer can reach 120 MVA.
 
Constitution:
Electric arc furnace transformer, short net, electrode lifting device, current conducting arm, furnace lid, furnace lid lifting and rotary
device, furnace body, furnace titling device, ladle cart, water cooling system, compressed air system, hydraulic system, charging system, 
high voltage electric system, low voltage electric control system, basic automation and computer control system.
Feb-11-17
 
SH steelmaking arc furnace
 
Usage :
Steelmaking electric arc furnace inputs electric energy into furnace by graphite electrode. Electric arc 
producing between electrode  tips and furnace burden is used as heat source to smelt steel. The heat source of electric arc furnace is 
electric energy. Atmosphere inside the furnace can be adjusted, which is helpful to melt steels containing easier oxidation of elements.
SH series three-phase steelmaking arc furnace is used to smelt high-quality carbon steel and all kinds of ferro-alloy steel. The designed 
volume is from 0.5-150t. And the rate power of transformer can reach 120 MVA.
 
Constitution:
Electric arc furnace transformer, short net, electrode lifting device, current conducting arm, furnace lid, furnace lid lifting and rotary
device, furnace body, furnace titling device, ladle cart, water cooling system, compressed air system, hydraulic system, charging system, 
high voltage electric system, low voltage electric control system, basic automation and computer control system.
May-09-14
 
Construction:
Steelmaking arc furnace inputs electric energy into furnace by graphite electrode. Electric arc producing between electrode tips and furnace burden is used as heat source to smelt steel. The heat source of electric arc furnace is electric energy. Atmosphere inside the furnace can be adjusted, which is helpful to melt steels containing easier oxidation of elements. Sh series three-phase steelmaking arc furnace is used to smelt high-quality carbon steel and all kinds of ferro-alloy steel. The designed volume is from 0.5-150t. And the rate power of transformer can
Equipment constitution
Purpose:
Electric furnace transformer, short net, electrode lifting device, current conducting arm, furnace lid, furnace lid lifting and rotary device, furnace body, furnace titling device, ladle cart, water cooling system, compressed air system, hydraulic system, charging system, high voltage electric system, low voltage electric control system, basic automation and computer control system.
Main parameter and chosen type

Container
Feb-14-17
 
High impedance electric arc furnace
 
Usage: 
It is used to melt plain steel, high-quality carbon steel and kinds of alloy steel. It's used to scrap steel operation, scrap steel and molten iron charging operation, scrap and pellet, pre-heating scrap, hot-pressing reduced iron, sponge iron, etc. 
Features:
The primary loop series reactor can improve the system impedance to realize the secondary higher voltage. It operates with long arc and low current. The electric arc is stable and the arc power is high. Various performance indicators approach direct current arc furnace. On-load voltage regulation is adopted during the operation of arc furnace. The structure of furnace body is frame type water cooling structure. The furnace shells up and down can be taken down. Proportional value is used to control electrode lifting, the rotary of furnace lid and the furnace body tilting. This device is installed with the whole set PLC system and computer control system, computer image monitoring system and neuron network artificial intelligent electrode control adjustment system. The device is also set with oxygen lance of furnace door, speed oxygen lance of furnace wall, burner and carbon injection system.
 
Constitution:
furnace body, tilting device, electrode lifting device, furnace lid lifting and rotary device, cooling water and its alarming display device, hydraulic station, compressed air system, feeding system, high-voltage switch system, transformer, series reactor, low-voltage power supply system, computer control system and picture monitoring system, neuron network artificial intelligent electrode control adjustment system. 
 
Main performance parameter:
Smelting period/tap-to-tap cycle: 60min (ultra high power)
Power consumption: ?¤ 380 KWh/t (scrap)
Consumption of electrode ?¤ 2.5Kg/t (scrap)
Service life of water cooling furnace wall ?¥ 3500 ( per furnace)
The average oxygen consumption: 25-50 M3/t
GOLD Member
VERIFIED
Jan-09-21

Cast Iron Slag

$230
MOQ: 150  Metric Tonnes
Supplier From Southampton, United Kingdom
 
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel.

Physical Description
On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm

Chemical Composition
Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%.

Packing: Loose in container

Loading: in 20 Container

For further information, please feel free to contact us.
588 Shoo In Sh Steelmaking Arc Furnace Sh 0 5 Suppliers
Short on time? Let Shoo In Sh Steelmaking Arc Furnace Sh 0 5 sellers contact you.
GOLD Member
VERIFIED
Jun-28-21

Pig Iron

MOQ: Not Specified
Supplier From Faridabad, Haryana, India
 
Pig Iron for sale at high quantities from India. Payment Term - LC For price and specification.
This Pig Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 300mm -1000mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 85 +/- 5% and P contents < 0.8% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container.
Feb-14-17
 
High impedance electric arc furnace
 
Usage: 
It is used to melt plain steel, high-quality carbon steel and kinds of alloy steel. It's used to scrap steel operation, scrap steel and molten iron charging operation, scrap and pellet, pre-heating scrap, hot-pressing reduced iron, sponge iron, etc. 
Features:
The primary loop series reactor can improve the system impedance to realize the secondary higher voltage. It operates with long arc and low current. The electric arc is stable and the arc power is high. Various performance indicators approach direct current arc furnace. On-load voltage regulation is adopted during the operation of arc furnace. The structure of furnace body is frame type water cooling structure. The furnace shells up and down can be taken down. Proportional value is used to control electrode lifting, the rotary of furnace lid and the furnace body tilting. This device is installed with the whole set PLC system and computer control system, computer image monitoring system and neuron network artificial intelligent electrode control adjustment system. The device is also set with oxygen lance of furnace door, speed oxygen lance of furnace wall, burner and carbon injection system.

 
Constitution:
furnace body, tilting device, electrode lifting device, furnace lid lifting and rotary device, cooling water and its alarming display device, hydraulic station, compressed air system, feeding system, high-voltage switch system, transformer, series reactor, low-voltage power supply system, computer control system and picture monitoring system, neuron network artificial intelligent electrode control adjustment system. 
 
Main performance parameter:
Smelting period/tap-to-tap cycle: 60min (ultra high power)
Power consumption: ?¤ 380 KWh/t (scrap)
Consumption of electrode ?¤ 2.5Kg/t (scrap)
Service life of water cooling furnace wall ?¥ 3500 ( per furnace)
The average oxygen consumption: 25-50 M3/t
Feb-14-17
 
High impedance electric arc furnace
 
Usage: 
It is used to melt plain steel, high-quality carbon steel and kinds of alloy steel. It's used to scrap steel operation, scrap steel and molten iron charging operation, scrap and pellet, pre-heating scrap, hot-pressing reduced iron, sponge iron, etc. 
Features:
The primary loop series reactor can improve the system impedance to realize the secondary higher voltage. It operates with long arc and low current. The electric arc is stable and the arc power is high. Various performance indicators approach direct current arc furnace. On-load voltage regulation is adopted during the operation of arc furnace. The structure of furnace body is frame type water cooling structure. The furnace shells up and down can be taken down. Proportional value is used to control electrode lifting, the rotary of furnace lid and the furnace body tilting. This device is installed with the whole set PLC system and computer control system, computer image monitoring system and neuron network artificial intelligent electrode control adjustment system. The device is also set with oxygen lance of furnace door, speed oxygen lance of furnace wall, burner and carbon injection system.
 
Constitution:
furnace body, tilting device, electrode lifting device, furnace lid lifting and rotary device, cooling water and its alarming display device, hydraulic station, compressed air system, feeding system, high-voltage switch system, transformer, series reactor, low-voltage power supply system, computer control system and picture monitoring system, neuron network artificial intelligent electrode control adjustment system. 
 
Main performance parameter:
Smelting period/tap-to-tap cycle: 60min (ultra high power)
Power consumption: ?¤ 380 KWh/t (scrap)
Consumption of electrode ?¤ 2.5Kg/t (scrap)
Service life of water cooling furnace wall ?¥ 3500 ( per furnace)
The average oxygen consumption: 25-50 M3/t
May-09-14
 
Construction:
Steelmaking arc furnace inputs electric energy into furnace by graphite electrode. Electric arc producing between electrode tips and furnace burden is used as heat source to smelt steel. The heat source of electric arc furnace is electric energy. Atmosphere inside the furnace can be adjusted, which is helpful to melt steels containing easier oxidation of elements. Sh series three-phase steelmaking arc furnace is used to smelt high-quality carbon steel and all kinds of ferro-alloy steel. The designed volume is from 0.5-150t. And the rate power of transformer can
Equipment constitution
Purpose:
Electric furnace transformer, short net, electrode lifting device, current conducting arm, furnace lid, furnace lid lifting and rotary device, furnace body, furnace titling device, ladle cart, water cooling system, compressed air system, hydraulic system, charging system, high voltage electric system, low voltage electric control system, basic automation and computer control system.
Main parameter and chosen type

Container
VERIFIED
Sep-13-20

High Alumina Refractory Bricks

$0.72
MOQ: Not Specified
Supplier From Ahmedabad, Gujarat, India
 
SPECIFICATION

Shape RECTANGULAR // CUSTOMISED
Brick/Block Color BROWN
For Use in Side Walls, Partition Walls, Roof, Floor
Brand GLM
Material CLAY AND ALUMINA / BAUXITE
Size 9 In. X 4 In. X 3 In.

High alumina brick for blast furnace;
Burned micro hole carbon-high alumina brick for blast furnace;
Normal high alumina brick for hot blast stove;
Low creep high alumina brick for hot blast stove;
High alumina brick for electric arc furnace roofs;
High alumina brick for steel ladle.


1. High Purity;

2. Small Impurities;

3. Low Thermal Capacity;

4. Low Thermal Conductivity;

5. High Strength;

6. Good Thermal Resistance;

7. Strong Anti-Corrosion.
May-21-10
 
1. Shaft furnace holding furnace up and down launder feeding device hydraulic transmission unit of holding furnace.

2. Shaft furnace holding furnace premixed burner of up and down launder include the control system multistage pressure blower system on-line automatic sampling controlled by plc co continuous automatic detecting system.



Melting speed:6-20t/h
Start time of melting:<2 hours
Capacity of the holding furnace:≥8t
GOLD Member
Nov-18-23
Supplier From Dubai, United Arab Emirates
 
Ferro Silico Manganese (FeSiMn) is a ferrous alloy that is produced by melting manganese ore and quartzite in the presence of coke in an arc furnace .

Ferro Silico Manganese is an important deoxidizer, desulphurizer, and alloying element that increases the tensile strength, toughness, stiffness, wear resistance, and hardenability of steel, helping to improve the safety and effectiveness of the end product . It is widely used in the steelmaking industry and has become the essential deoxidizing agent and additive in the steelmaking industry .

The process of producing Ferro Silico Manganese is much more difficult than ferromanganese. The main reason is that a higher temperature is needed to reach the desired silicon level �¹. Slag generated in the production of high carbon ferromanganese is commonly used to produce FeSiMn .

Ferro Silico Manganese is available in different types, and it can be used for various applications, such as cladding, decking, ceilings, walls, and saunas .

In summary, Ferro Silico Manganese is a ferrous alloy that is produced by melting manganese ore and quartzite in the presence of coke in an arc furnace. It is widely used in the steelmaking industry as an important deoxidizer, desulphurizer, and alloying element that increases the tensile strength, toughness, stiffness, wear resistance, and hardenability of steel, helping to improve the safety and effectiveness of the end product. It is available in different types and can be used for various applications, such as cladding, decking, ceilings, walls, and saunas.
GOLD Member
VERIFIED
Jun-26-24

Graphite Petroleum Coke

$300
MOQ: 500  Metric Tonnes
Sample Available
Supplier From Trier, Rhineland -palatinate, Germany
 
High-quality green petroleum coke is taken into Acheson furnace for graphitization process with temperature around 2500-3600 �°C.The product has higher degree of graphitization with nitrogen content is lower than 300ppm.This product, with lower sulpur and ash content, is ideal recarburizer for steelmaking and foundry industries.

Fixed carbon 99% min.
Sulphur 0.03% max.
Ash
0.5% max. 0.7% max.
1% max. 1% max.
Volatile matter
0.5% max. 0.8% max.
1% max.
1% max.
Moisture 0.5% max. 0.5% max.
0.5% max. 0.5% max.
Size(mm) 1-3/1-5 1-5/5-10
0.2-1 0-0.5
2
HQ-GPC-02
98.5% min.
0.05% max. HQ-GPC-03
98% min.
0.07% max. HQ-GPC-04
98% min.
0.1% max.

ä¸? è??楺碳表 HENGGIAO CARBON
Semi-graphite Petroleum Coke(SGPC)
Semi GPC is from the insulation layer of acheson furnace. The graphitization temperature is in the range of 1700-2500 C.It belongs to the medium temperature graphitization product. It is economical recarburizer with high fixed carbon, lower sulphur content, fast dissolution rate and high absorption rate.
GOLD Member
VERIFIED
Jun-26-24

Silicon Carbide Sic

$150
MOQ: 500  Metric Tonnes
Sample Available
Supplier From Trier, Rhineland -palatinate, Germany
 
Silicon carbide si made from hte mixture of pure silica sand and green petroleum
coke in ultra high power acheson furnace. Electric current is passed through t h e conductor,bringing about a chemical reaction ni which the carbon ni the coke and silicon ni the sand combined ot form SIC and carbon monoxide gas. Silicon carbide si
With annual capacity for 60,000 tons of silicon carbide, we can provide different grade of silicon carbide to meet different clients' requirements, such as 70% SIC, 80% SIC, 85% SIC, 90% SIC, 93% SIC and 98% SIC, etc.We also provide customized size for 90% SIC and 98% SIC, such as 200 mesh and 325 mesh

Fe203
Al203
Free carbon 3,5%MAX
Moisture Size(mm) Ha-SIC-01 90% min.
1.5% max.
15.% max. 35.% max.
0.5% max.
1-5/1-10 HQ-SIC-02 90% min.
1.5% max.
1.5% max. 3.5% max.
0.5% max.
0-10 HQ-SIC-03 88% min.
1.5% max. 1.5% max. 3.5% max. 0.5% max.
0-1/1-10 HQ-SIC-04
98% min.
0.6% max. 0.6% max. 0.2% max.
0.5% max.
0-1/1-3 HQ-SIC-05
70% min.
2% max. 1% max. 10% max.
0.5% max.
1-10
GOLD Member
VERIFIED
Jun-26-24

Semi Graphite Petroleum Coke

$300
MOQ: 500  Metric Tonnes
Sample Available
Supplier From Trier, Rhineland -palatinate, Germany
 
Semi GPC is from the insulation layer of acheson furnace. The graphitization temperature is in the range of 1700-2500 C.It belongs to the medium temperature graphitization product. It is economical recarburizer with high fixed carbon, lower sulphur content, fast dissolution rate and high absorption rate.
Item HQ-SGPC-01
Fixed carbon
Sulphur 98.5% min.
0.1% max.
Ash 0.7% max.
Volatile matter
Moisture Size(mm)
HQ-SGPC-02
98.5% min.
0.2% max.
0.7% max. HQ-SGPC-03
98.5% min.
0.3% max.
0.7% max. HQ-SGPC-04
98% min.
0.5% max.
1% max. HQ-SGPC-05
98% min.
0.8% max.
1% max.
0.8% max. 0.5% max. 0.8% max. 0.5% max.
Graphite Electrode Scrap(GES)
Item
Fixed carbon
Sulphur
Ash HQ-CPC-01
98.5% min.
0.5% max.
0.7% max. HQ-CPC-02
98.5% min.
0.8% max.
0.7% max.
HQ-C
PC
-03
98.5% min.
1% max.
0.5% max.
HQ-CPC-04
98.5% min.
2% max.
0.5% max. HQ-CPC-05
98.5% min.
3% max.
0.5% max.
Size(mm) 1-3/1-5
1-5/30-60 1-3/5-20
1-5 0-2
Item
Fixed carbon
Sulphur
Ash
Volatile matter
Moisture Size (mm) HQ-GES-01
99% min.
0.03%max.
0.5% max.
0.5% max.
0.5%max.
1-5 HQ-GES-02
98.5% min.
0.05%max.
0.7% max.
0.8%
max.
0.5%max.
0.2-1
* Other sizes and specifications are available,please enquire
- HENGQIAOCARBON
1% max. 1% max.
0.5% max. 0.5% max.
0.8% max.
0.5% max.
1-5 3-8 1-5
1-5 1-5
Green petroleum coke 144 shaft kiln for petcoke calcined
1% max.
0.5% max.
Crush
Sieving Packing
Volatile matter
Moisture 0.8% max.
0.5% max. 0.8%
max.
0.5% max. 1% max.
0.5%
max.
1%
max. 0.5% max.
GOLD Member
VERIFIED
Feb-03-25
Supplier From Johannesburg, South Africa
 
Sunflower imports from South Africa include a variety of high-quality sunflower seeds, such as DRSF-108, DRSF-113, and others. South African sunflower exporters ship these premium varieties abroad, contributing to a diverse global sunflower market. Below are some key varieties of sunflower exported from South Africa:

1. DRSF-108
Released in 2004, DRSF-108 has an average yield of 1200-1400 kg/ha. It matures in about 95-100 days and has an oil content of around 37%.

2. DRSF-113
This variety, released in 2007, yields 1200-1400 kg/ha. It takes approximately 90-98 days to mature, with an oil content of about 40%.

3. DRSH-1 (PCSH-243)
Released in 2006, DRSH-1 has an average yield of 1300-1600 kg/ha and matures in about 95-105 days. The oil content is around 40%.

4. Surya (RVK - 72-37)
Surya is recommended specifically for Maharashtra and matures in about 90-95 days. Under rainfed conditions, it yields 800-1000 kg/ha, with oil content ranging from 32-35%.

5. KBSH-1
This variety matures in 90-95 days and has a plant height of 150-180 cm. The oil content is high, ranging from 43-45%, with an average yield of 1900 kg/ha.

6. NSFH-9
NSFH-9 matures in about 85-95 days and grows to a height of 120-150 cm. It yields around 1800 kg/ha, with a maximum potential of 2700 kg/ha. The oil content is between 38-42%.

7. SH-3322 SH-3322 matures in 85-95 days and has a plant height of 120-145 cm. It yields an average of 2095 kg/ha, with an oil content of 40-41%.

8. MSFH-1
MSFH-1 matures in about 95 days and has an oil content of 40%. The average yield of this variety is between 1500-2500 kg/ha.
GOLD Member
May-13-24

Graphite Electrode

$1.30K
MOQ: 1  Metric Tonnes
Supplier From Shijiazhuang, Hebei, China
 
The graphite electrode comprises:

(1) Regular power graphite electrode( RP grade Graphite Electrode) . Graphite electrode with current density less than 17a / cm2 is allowed to be used in common power electric furnaces for steelmaking, silicon smelting and yellow phosphorus smelting.

(2) Oxidation resistant coating graphite electrode. A graphite electrode coated with an anti-oxidation protective layer (graphite electrode anti oxidant). The formation of both conductive and high temperature oxidation resistant protective layer can reduce the electrode consumption (19% ~ 50%), prolong the service life of the electrode (22% ~ 60%), and reduce the electric energy consumption of the electrode. The popularization and application of this technology can bring such economic and social effects as follows: 1. The unit consumption of graphite electrode is less, and the production cost is reduced to a certain extent. For example, according to the consumption of 35 graphite electrodes per week and 165 refining heats of LF refining furnace in a steel-making plant without shutdown in the whole year, 373 (153 tons) electrodes can be saved every year by using graphite electrode oxidation resistance technology, and RMB 2585700 can be saved by RMB 16900 per ton of ultra-high power electrode per year. 2 The graphite electrode consumes less electricity, saves the unit electricity consumption of steelmaking, saves the production cost, saves energy! 3. Because the graphite electrode is replaced less times, the labor amount and risk coefficient of operators are reduced, and the production efficiency is improved. 4 Graphite electrode is a high consumption and high pollution product, which has a very important social significance in the days of promoting energy conservation, emission reduction and environmental protection. This technology is still in the stage of research and development in China, and some domestic manufacturers have begun to produce it. It is widely used in Japan and other developed countries. At present, there are also companies that import the anti-oxidation protective coating in China.

(3) High power graphite electrode (HP grade Graphite Electrode). Graphite electrode with current density of 18-25a / cm2 is allowed to be used in high power electric arc furnace for steelmaking.

(4) Ultra high power graphite electrode( UHP grade Graphite Electrode). Graphite electrode with current density greater than 25A / cm2 is allowed. It is mainly used in ultra high power EAF.
GOLD Member
Feb-24-25

Graphite Electrode

$0
MOQ: Not Specified
Sample Available
Supplier From North York, Ontario, Canada
 
The graphite electrode comprises:

(1) Regular power graphite electrode( RP grade Graphite Electrode) . Graphite electrode with current density less than 17a / cm2 is allowed to be used in common power electric furnaces for steelmaking, silicon smelting and yellow phosphorus smelting.

(2) Oxidation resistant coating graphite electrode. A graphite electrode coated with an anti-oxidation protective layer (graphite electrode anti oxidant). The formation of both conductive and high temperature oxidation resistant protective layer can reduce the electrode consumption (19% ~ 50%), prolong the service life of the electrode (22% ~ 60%), and reduce the electric energy consumption of the electrode. The popularization and application of this technology can bring such economic and social effects as follows: 1. The unit consumption of graphite electrode is less, and the production cost is reduced to a certain extent. For example, according to the consumption of 35 graphite electrodes per week and 165 refining heats of LF refining furnace in a steel-making plant without shutdown in the whole year, 373 (153 tons) electrodes can be saved every year by using graphite electrode oxidation resistance technology, and RMB 2585700 can be saved by RMB 16900 per ton of ultra-high power electrode per year. 2 The graphite electrode consumes less electricity, saves the unit electricity consumption of steelmaking, saves the production cost, saves energy! 3. Because the graphite electrode is replaced less times, the labor amount and risk coefficient of operators are reduced, and the production efficiency is improved. 4 Graphite electrode is a high consumption and high pollution product, which has a very important social significance in the days of promoting energy conservation, emission reduction and environmental protection. This technology is still in the stage of research and development in China, and some domestic manufacturers have begun to produce it. It is widely used in Japan and other developed countries. At present, there are also companies that import the anti-oxidation protective coating in China.

(3) High power graphite electrode (HP grade Graphite Electrode). Graphite electrode with current density of 18-25a / cm2 is allowed to be used in high power electric arc furnace for steelmaking.

(4) Ultra high power graphite electrode( UHP grade Graphite Electrode). Graphite electrode with current density greater than 25A / cm2 is allowed. It is mainly used in ultra high power EAF.
Feb-14-17
 
Condition: New
Type: Arc Furnace, SH steelmaking arc furnace
Usage: Melting Furnace
Place of Origin: Shaanxi, China (Mainland)
Brand Name: SHOO-IN
Model Number: SH-1
Voltage: depends on furnace capacity
Power(W): depends on furnace capacity
Dimension(L*W*H): depends on furnace capacity
Weight: depends on furnace capacity
Certification:ISO9001:2008;ISO14001:2004
Warranty: 1year
After-sales Service Provided: Engineers available to service machinery overseas
Item: electric arc furnace
Capacity: 0.5t-150t
Company: Manufacture, factory
Installation: local installation
VERIFIED
Jun-21-22

Neskeb Welding Cables

$1 - $10
MOQ: Not Specified
Supplier From Rajkot, Gujarat, India
 
Cable Standard
Generally conforms to, Based on IS:9857-1990 VDE 0282,
IEC 245-6, BS 6899

Silent Features
- Ultra high performance flexible welding lead, double insulated
for longer life and added safety
- Better flame retardant properties
- Outstanding toughness & durability
- High resistance to cuts, tears & abrasion
- Resistance to oil, solvents and chemicals
- Excellent ozone and weather resistant

Technical Data
Fixed Installation : -20C to max.+90C
Nominal Voltage : 600 V
Spark Test : 3.5 KV(ac)
Color : Orange / Black Jacket
Min. Bending Radius : 6 x Cable Diameter

Standard Packing
Coils 100, 200, 300 and 500m

Conductor
High conductivity, bare annealed copper flexible
conductor, EC copper class 5 & class 6 generally
conforms to IS:8130-1984, IEC 60228

Separation
Polyester tape

Insulation
Double Insulated/single insulated flexible Nitrile
rubber HOFR insulated as per IS:6380-1984

Color
Orange / Black Jacket

Current Rating
The maximum current ratings of flexible welding cables for different
duly cycles are based on an ambient air temperature of 25 C and a
maximum conductor temperature of 90 C. The percentage duly cycles
for various processes and applications are as follows:
- Automobile Welding : up to 100%
- Semi Automatic Welding : 30% to 85%
- Manual Welding : 0% to 60%
- Very intermittent or Occasional Welding : up to 20%

Voltage Drop
When total cable lengths in excess of 15mtr., are involved, it may be necessary
to use cables of larger cross section to ensure that the voltage drop is not
excessive & welding currents are maintained at adequate levels.

Application
Designed for the secondary (high current) connection to automatic or hand - held metal arc welding electrodes. It is suitable for flexible use
under rugged conditions, on assembly lines & conveyor systems, in machine tool and automatically operated line & spot welding machines
588 Shoo In Sh Steelmaking Arc Furnace Sh 0 5 Suppliers
Short on time? Let Shoo In Sh Steelmaking Arc Furnace Sh 0 5 sellers contact you.
Explore Shoo In Sh Steelmaking Arc Furnace Sh 0 5 related import export discussions