Usage:
It is used to melt plain steel, high-quality carbon steel and kinds of alloy steel. It's used to scrap steel operation, scrap steel and molten iron charging operation, scrap and pellet, pre-heating scrap, hot-pressing reduced iron, sponge iron, etc.
Features:
The primary loop series reactor can improve the system impedance to realize the secondary higher voltage. It operates with long arc and low current. The electric arc is stable and the arc power is high. Various performance indicators approach direct current arc furnace. On-load voltage regulation is adopted during the operation of arc furnace. The structure of furnace body is frame type water cooling structure. The furnace shells up and down can be taken down. Proportional value is used to control electrode lifting, the rotary of furnace lid and the furnace body tilting. This device is installed with the whole set PLC system and computer control system, computer image monitoring system and neuron network artificial intelligent electrode control adjustment system. The device is also set with oxygen lance of furnace door, speed oxygen lance of furnace wall, burner and carbon injection system.
Constitution:
furnace body, tilting device, electrode lifting device, furnace lid lifting and rotary device, cooling water and its alarming display device, hydraulic station, compressed air system, feeding system, high-voltage switch system, transformer, series reactor, low-voltage power supply system, computer control system and picture monitoring system, neuron network artificial intelligent electrode control adjustment system.
Main performance parameter:
Smelting period/tap-to-tap cycle: 60min (ultra high power)
Power consumption: ?¤ 380 KWh/t (scrap)
Consumption of electrode ?¤ 2.5Kg/t (scrap)
Service life of water cooling furnace wall ?¥ 3500 ( per furnace)
The average oxygen consumption: 25-50 M3/t
Usage:
It is used to melt plain steel, high-quality carbon steel and kinds of alloy steel. It's used to scrap steel operation, scrap steel and molten iron charging operation, scrap and pellet, pre-heating scrap, hot-pressing reduced iron, sponge iron, etc.
Features:
The primary loop series reactor can improve the system impedance to realize the secondary higher voltage. It operates with long arc and low current. The electric arc is stable and the arc power is high. Various performance indicators approach direct current arc furnace. On-load voltage regulation is adopted during the operation of arc furnace. The structure of furnace body is frame type water cooling structure. The furnace shells up and down can be taken down. Proportional value is used to control electrode lifting, the rotary of furnace lid and the furnace body tilting. This device is installed with the whole set PLC system and computer control system, computer image monitoring system and neuron network artificial intelligent electrode control adjustment system. The device is also set with oxygen lance of furnace door, speed oxygen lance of furnace wall, burner and carbon injection system.
Constitution:
furnace body, tilting device, electrode lifting device, furnace lid lifting and rotary device, cooling water and its alarming display device, hydraulic station, compressed air system, feeding system, high-voltage switch system, transformer, series reactor, low-voltage power supply system, computer control system and picture monitoring system, neuron network artificial intelligent electrode control adjustment system.
Main performance parameter:
Smelting period/tap-to-tap cycle: 60min (ultra high power)
Power consumption: ?¤ 380 KWh/t (scrap)
Consumption of electrode ?¤ 2.5Kg/t (scrap)
Service life of water cooling furnace wall ?¥ 3500 ( per furnace)
The average oxygen consumption: 25-50 M3/t
Usage:
It is used to melt plain steel, high-quality carbon steel and kinds of alloy steel. It's used to scrap steel operation, scrap steel and molten iron charging operation, scrap and pellet, pre-heating scrap, hot-pressing reduced iron, sponge iron, etc.
Features:
The primary loop series reactor can improve the system impedance to realize the secondary higher voltage. It operates with long arc and low current. The electric arc is stable and the arc power is high. Various performance indicators approach direct current arc furnace. On-load voltage regulation is adopted during the operation of arc furnace. The structure of furnace body is frame type water cooling structure. The furnace shells up and down can be taken down. Proportional value is used to control electrode lifting, the rotary of furnace lid and the furnace body tilting. This device is installed with the whole set PLC system and computer control system, computer image monitoring system and neuron network artificial intelligent electrode control adjustment system. The device is also set with oxygen lance of furnace door, speed oxygen lance of furnace wall, burner and carbon injection system.
Constitution:
furnace body, tilting device, electrode lifting device, furnace lid lifting and rotary device, cooling water and its alarming display device, hydraulic station, compressed air system, feeding system, high-voltage switch system, transformer, series reactor, low-voltage power supply system, computer control system and picture monitoring system, neuron network artificial intelligent electrode control adjustment system.
Main performance parameter:
Smelting period/tap-to-tap cycle: 60min (ultra high power)
Power consumption: ?¤ 380 KWh/t (scrap)
Consumption of electrode ?¤ 2.5Kg/t (scrap)
Service life of water cooling furnace wall ?¥ 3500 ( per furnace)
The average oxygen consumption: 25-50 M3/t
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel.
Physical Description
On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm
Chemical Composition
Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%.
Packing: Loose in container
Loading: in 20 Container
For further information, please feel free to contact us.
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
16325 Sh 60 G High Impedance Arc Furnace Suppliers
Short on time? Let Sh 60 G High Impedance Arc Furnace sellers contact you.
These cast iron skulls are a by-product derived from the cast iron foundries. The byproduct is a ferrous by-product which can be utilised in an electric arc furnace to produce crude steel.
Physical Description
On visual inspection, it appears to be made up of irregular shapes.
The material is separated by magnet and screener.
Packing: Loose in container
Loading: in 20 Container
For further information, please feel free to contact us.
Peanuts are popularly used as seed oil in India. They are easily available round the year and almost everywhere in India. They are easily available round the year and almost everywhere in India.
Peanuts are also taken as snacks in many households especially in India. In reality, peanuts are actually legumes. But since they have all the properties of nuts like almonds, cashew nuts, etc., these are also included in the family of nuts.
Groundnut/Peanuts are known as Moongphali in India. India is one of the largest producers of groundnuts in the world. The special variety peanut of this area (Saurastra, Gujarat) is world famous in its flavor, taste and aroma. Raw Groundnut valued for its protein contents, which is of high biological value.
Groundnut contains more protein then meat, two and half more than eggs and more than any other vegetable food. It also contains phosphorous, thiamin and niacin that help in building resistance against all infections, such as Hepatitis and tuberculosis.
We can offer Groundnut/Peanuts
Peanuts Long Type (Bold Type):
Long/Bold Type 38-42, 40-50, 50-60, 60-70, 70-80, and Crushing Grade Quality Counts/Ounce
Peanut Round Type (Java Type):
Round Type(Java Type) 40-50, 50-60, 50-60, 60-70, 70-80, 80-90, 90-100, 140-160 Counts/Ounce
Jute Bags Packing: - We shall be able to provide in 5Kg, 10 kg, 15 Kg, 25 kg and 50 Kg jute bags packing.
Vacuum Packing: - For special requirements for our buyers, we can provide the cargoes in 10 kg, 12.5 kg and 25 kg vacuum packed PP bags
Carbon Blocks used in furnace having a great alternative against Petcoke.
As it has high melting power and cheap as compared to Petcoke.
Here in India, we are a supplier and exporters of Carbon blocks.
Purpose: it is used to melt plain steel, high-quality carbon steel and kinds of alloy steel. It's used to scrap steel operation, scrap steel and molten iron charging operation, scrap and pellet, pre-heating scrap, hot-pressing reduced iron, sponge iron, etc.
Features:
The primary loop series reactor can improve the system impedance to realize the secondary higher voltage. It operates with long arc and low current. The electric arc is stable and the arc power is high. Various performance indicators approach direct current arc furnace. On-load voltage regulation is adopted during the operation of arc furnace.
The structure of furnace body is frame type water cooling structure. The furnace shells up and down can be taken down. Proportional value is used to control electrode lifting, the rotary of furnace lid and the furnace body tilting. This device is installed with the whole set plc system and computer control system, computer image monitoring system and neuron network artificial intelligent electrode control adjustment system
Purpose: it is used to melt plain steel, high-quality carbon steel and kinds of alloy steel. It's used to scrap steel operation, scrap steel and molten iron charging operation, scrap and pellet, pre-heating scrap, hot-pressing reduced iron, sponge iron, etc.
Features:
The primary loop series reactor can improve the system impedance to realize the secondary higher voltage. It operates with long arc and low current. The electric arc is stable and the arc power is high. Various performance indicators approach direct current arc furnace. On-load voltage regulation is adopted during the operation of arc furnace.
The structure of furnace body is frame type water cooling structure. The furnace shells up and down can be taken down. Proportional value is used to control electrode lifting, the rotary of furnace lid and the furnace body tilting. This device is installed with the whole set plc system and computer control system, computer image monitoring system and neuron network artificial intelligent electrode control adjustment system.
Prperties: The prduct is a white needle crystal r pwder. SP. GR. 2.8823.13g/ cm3, sublimatin temp. 1272Celsiur scale.Its slightly sluble in water and greatly sluble in HF liquid. The chemical prperty fr the high density aluminum fluride is very steady, but that cntains certain crystal water will be decmpsed int Al23 at high temperature with HF being released.
Specificatin:
grade chemical cmpsitin % Physical character
F Al N2 Fe2342- P25 LI Bulk dity g/cm3
AF-0 61.0 31.5 0.30 0.10 0.06 0.10 0.03 0.5 1.5
AF-1 60.0 31.0 0.40 0.30 0.10 0.6 0.04 1.0 1.3
AF-2 58.0 29.0 2.8 0.30 0.12 1.0 0.04 5.5 0.7
AF-3 58.0 29.0 2.8 0.35 0.12 1.0 0.04 5.5 0.7
Uses: Its mainly used as an adjusting agent fr electrlyte in aluminum smelting by fused salt electrlysis, als in ceramic glaze, catalyst and flux f nnferrus metal metallurgy etc.
Brief Intrductin f the Prductin Technics
In the Hydrgen Fluride Reacting Furnace which is heated utside, Vitril reacts with Flurite t create the Hydrgen Fluride Gas and Anhydrus Fluride Plaster by heating in the prcess f prducing Aluminum Fluride, then the Hydrgen Fluride Gas react with dry Aluminium Hydrxide in Fluidized Bed t create t Aluminum Fluride and water.
Packaging
packed in wven PP bags with plastic film inside. Each bag has net weight f 25kgs, 50kgs, 500kgs and 1000kgs.
Orange color is bright, sweet and sour, generally orange, is one of the most common fruit in people's life, peel can be used as medicine.
Orange sweet acid, warm, into the lungs. The main treatment of chest stagnation, vomiting, Eat less, stomach yin deficiency, mouth thirst, Hyperactivity cough and excessive drinking. With appetizers, thirst quencher lungs effect. Orange nutrition is also very rich, an orange almost every day to meet the human body needs vitamin C content. And the orange contains more than 170 kinds of plant compounds and more than 60 kinds of flavonoids, most of which are natural antioxidants.
Organs rich in nutrients are hypolipidemic, anti-atherosclerosis and other effects, the prevention of cardiovascular disease in the great benefit. Juice contains a substance called "Norlylin", with the ability to inhibit and kill cancer cells, the prevention of gastric cancer. Orange peel was orange-red, flesh was granular, and grapefruit is very similar. Orange peel thin meat, juicy sweet and sour, peeled orange orange water can overflow.
Citrus fruit nutrient-rich, color and flavor and excellent, both fresh, but also processed into a variety of fruit juice-based processing products. Citrus production is the first of the fruit, citrus juice accounted for 3/4 of the juice, widely favored by consumers. According to the Central Health Research Institute, citrus per 100 grams of edible parts, containing 0.05 mg of riboflavin, 0.3 mg of niacin, 16 mg of ascorbic acid (vitamin C), 0.9 g of protein, 0.1 g of fat, 12 g of sugar, 0.2 grams of fiber, 0.4 grams of inorganic salts, 26 mg of calcium, 15 mg of phosphorus, 0.2 milligrams of iron, and 221.9 joules of calories. Orange carotene (vitamin A original) content after apricot, higher than other fruits.
1,Name: Sodium nitrite
Molecular formula: NaNO2
Formula weght:69.00
2Property: (1) ordinary sodium nitrite: white little crystals or light yellow
 (2) dry powder sodium nitrate: white crystal,non-caking, showing loose status.
Density:2.168. No odor, slightly salty. It is liable to deliquesce, dissolved in water,soluble in liquid ammonia,slightly soluble in ethanol and glycerin,Melting Point:271. Decomposition temperature is 320. It has oxidability and also has reducibility. It will slowly be oxidized into sodium nitrate in atmosphere, it can form nitrogen compound with nitrilo at low temperatures.
3Usage:It has been widely used in making nitro-compound and azo dye, mordant of textile dyeing, bleaching agent, metal heat finishing agent, cement early strength agent, and deicing agent etc.
Note: The product should be stored in a cool, dry place to prevent it from moisture, heat and sunlight. This product can not be mixed with strong reductant, inflammable and explosive materials, food, feed and additives. â?¢ This product is toxic and should be properly kept and can not be eaten.
4 Specification: (Technical Standards:GB2367-2006)
Item Unit Molten salt G High G First G Qualified G Dry powder G
Assay % 99.3 99.0 98.5 98.0 98.5
Sodium nitrate % 0.6 0.80 1.00 1.90 0.80
Chlorides % 0.03 0.10 0.17 -- 0.1
Water insolubles % 0.02 0.05 0.06 0.10 0.06
Moisture % 1.0 1.4 2.0 2.5 0.2
Loose degree -- -- -- -- 95
5,Package: net 50kg net each in plasic woven inner plasic bag, or according to customers requirement.
1.Name: Sodium nitrate
Chemical formula: NaNO3
Formula weght:84.99
2.Property:
(1) ordinary sodium nitrate: white little crystals or light yellow
(2) dry powder sodium nitrate: non-caking, showing loose status.
Density:2.257. It is liable to deliquesce, dissolved in water, soluble in liquid ammonia, slightly soluble in ethanol and glycerin, Melting Point:308. While being heated up to about 380 it will decompose and release oxygen and turn into sodium nitrite,as the heating goes on, it will decompose into oxygen, nitrogen and nitrogen oxide. It has strong oxidability and can cause combustion explosion if being mixed with organic substance, sulfur, sodium nitrate etc.
3. Usage:Â it has been wildly used in the glass industry, dye, dynamite, metallurgy, machinery, ceramic etc.
4. Specification: (Technical Standards:GB/T4553-2002)
Item Unit High G. First G. Qualified G. Dry powder G.
Assay % 99.7 99.3 98.5 99.3
Sodium nitrite % 0.01 0.02 0.15 0.02
Chlorides % 0.25 0.30 -- 0.25
Water insolubles % 0.03 0.06 -- 0.03
Moisture % 1.0 1.5 2.00 0.2
Carbonates % 0.05 0.10 -- 0.1
Iron % 0.005 -- -- 0.005
Loose degree -- -- -- 95
5.Package: net 25kg/50kg net each in plasic woven inner plasic bag,or 500kg net each in flexible container.
Chestnut produces higher energy, is a nut type, contains the starch is very high. According to the investigation of dry chestnut carbohydrates reached 77%, fresh chestnuts have 40%, is the potato 2.4 times; chestnut which is 4% to 5% protein content, although not as peanut, walnut, but also than cooked The rice is taller.
Fresh chestnuts contain vitamin C than the recognized vitamin C rich tomatoes to more, it is more than ten times the apple! Chestnut contains a wide range of minerals, potassium, magnesium, iron, zinc, manganese and other content than apples, pears and other common fruit is much higher, especially potassium-containing, than the so-called potassium-rich apple is also 4 times higher The chestnut not only contains a lot of starch, but also rich in protein, fat, B vitamins and other nutrients, heat is also high, chestnut vitamin B1.B2 rich in content, vitamin B2 content of at least 4 times the rice 100 grams also contains 24 mg of vitamin C, which is food can not match. Every 100 grams of protein containing 5.7 grams, 2 grams of fat, carbohydrates 40 to 45 grams, 25 grams of starch. Health chestnut vitamin content can be as high as 40 to 60 mg, cooked chestnut vitamin content of about 25 mg. Chestnut also contains calcium, phosphorus, iron, potassium and other inorganic salts and carotene, B vitamins and other ingredients.
Description: It has excellent detergency, emulsification ,and foamability, it is easy to dissolve in water. As well as favorable hard-water resistant and high-biodegradation.
Specifications:
ITEM SLES - 70 SLES - 28
Appearance Transparent or white viscous paste light yellow transparent liquid
Odor No strange odors No strange odors
Active Matter% 70�±2 28�±2
PH value 7.0-9.5 7.0-9.5
Unsulfated matter% Max. 2.0 Max. 1.0
Sodium sulfate % Max. 1.0 Max. 0.5
Microbiological(CFU/g) Max. 100 Max. 100
Dioxane(ppm) Max. 50 Max. 50
Heavy metal(ppm) Max. 10 Max. 10
Peroxide% Max. 0.1 Max. 0.1
Color Max. 10 Max. 10
Usage:
1. Used to prepare the shampoo, bath foam, soap,hand cleaner , liquid detergent and detergent.
2. Used in hard surface cleaner, such as the glass cleaner, car cleaner, they always used with the K12ã??LAS-Naã??6501.
3.Used in the textile, paper making, leather, machinery, petroleum. Industry.
Packing: plastic drum, per 160kg/170kg/200kg/220kg net weight
Loading weight in 1x20fcl:
18.24mt for 160kg drum
19.38mt for 170kg drum
17.6mt for 220kg drum
Storage: sealed and stored at the room temperature, the shelf life is two years.
Bauxite is a soft, whitish to reddish-brown rock consisting mainly of alumina-bearing hydroxides, oxides of iron, silicon and titanium with impurities of Ca, Mg, Cr, V, P, Ga and other elements. Raw Bauxite is a major source of aluminium. Basic alumina containing minerals of Bauxites are gibbsite Al(OH)3, Boehmite g-AlO(OH) and Diaspore a-AlO(OH). We are a major Raw Bauxite Exporter based in Maharashtra (India) and catering to the diverse demands of several middle and eastern Asian countries.
About Raw Bauxite:
The processing of Raw Bauxite is done at a number of alumina refineries in the world. Bauxite can be processed at a low-temperature autoclave digestion (145 oC to 155 oC). Raw Bauxite can be used also for sweetening stage and for non-autoclave digestion in agitators (105 oC).
About 85% of bauxite mined worldwide is used to produce alumina for refining into Aluminium metal and the balance 15% is processed and value added to make its way to other uses like refractory, chemical, cement, abrasives, etc. Aluminium is possibly the most versatile product with applications in almost every industry. Since Bauxite is the primary source for Aluminium there will always be an ongoing promising demand for the same.
Application & Uses of Bauxite:
Raw Bauxite is successfully used for metallurgical grade alumina production besides applications in the cement industry, alumina chemical, steel, alum, energy industries, flame-retardants, etc. Bauxite is used in :
- Aluminium
- Cement
- Chemical
- Blast Furnaces
- Iron/Steel Ladles, etc.
Advantages of Artha Bauxite:
Artha Mineral Resources has good sources for Gibbsitic Bauxite which requires low digestion temperature (145 oC -155 oC) making it more economical to process. Mines are also in close proximity to all-weather ports which makes it very convenient and cost effective to ship this material.
Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries.
The Major Utilization Areas Of Fly Ash :
- Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC).
- Part replacement of OPC in cement concrete.
- High volume Fly Ash concrete.
- Roller Compacted Concrete used for dam & pavement construction.
- Manufacture of ash bricks and other building products.
- Construction of road embankments, structural fills, low lying area development.
- As a soil amender in agriculture and wasteland development.
Types of Fly Ash:
- According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties.
- Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product.
- Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash.
- Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics.
