Ginger root
Botanical name: Zingiber officinale Linn.
Family: Zingiberaceae.
Ginger oil and oleoresins are the volatile oil derived by steam distillation of ginger and oleoresin. It is obtained by percolating the powdered rhizomes of Ginger, Zingiber officinale with volatile solvents. Ginger contains 1-2 percent of volatile oil, 5-8 percent of pungent acrid oleoresin and starch. Zingiberene is the chief constituent in the oil of ginger. Oil is employed for flavoring all kinds of food products and confectionary and finds limited use in perfumery. Oleoresin, commercially called Gingerin contains pungent principles viz. gingerol and shogaol apart from the volatile oil of ginger and is used as an aromatic, carminative, stomachic and as a stimulant.
Oleoresin from ginger is obtained conventionally by extraction of dried powdered ginger with organic solvents like ethyl acetate, ethanol or acetone. Commercial dried ginger yields 3.5-10.0 per cent oleoresin. Ginger oleoresin is a dark brown viscous liquid responsible for the flavour and pungency of the spice.
Ginger of commerce or `Adrak` is the dried underground stem or rhizome of the plant, which constitutes one of the five most important major spices of India, standing third or fourth, competing with chillies, depending upon fluctuations in world market prices, world market demand and supply position.
Ginger, like cinnamon, clove and pepper, is one of the most important and oldest spices. It consists of the prepared and sun dried rhizomes known in trade as `hands` and `races` which are either with the outer brownish cortical layers (coated or unscraped), or with outer peel or coating partially or completely removed.
Ginger requires a warm and humid climate. It is cultivated from sea level to an altitude of 1500 meters, either under heavy rainfall conditions of 150 to 300 cm or under irrigation. The crop can thrive well in sandy or clayey loam or lateritic soils.
The composition of dry ginger is given below:
Dry Ginger rootMoisture:6.9 %
Protein:8.6 %
Fat:6.4 %
Fiber:5.9 %
Carbohydrates:66.5 %
Ash:5.7 %
Calcium:0.1 %
Phosphorous:.15 %
Iron:0.011 %
Sodium:0.03 %
Potassium:1.4 %
Vitamin A:175 I.U./100 g
Vitamin B1:0.05 mg/100 g
Vitamin B2:0.13 mg/100 g
Niacin:1.9 mg/100 g
Vitamin C:12.0 mg/100 g
Calorific value:380 calories/100 g.
Ginger Oleoresin is obtained by extraction of powdered dried ginger with suitable solvents like alcohol, acetone etc. Unlike volatile oil, it contains both the volatile oil and the non-volatile pungent principles for which ginger is so highly esteemed. Concentration of the acetone extract under vacuum and on complete removal of even traces of the solvent used, yields the so called oleoresin of ginger. Ginger oleoresin is manufactured on a commercial scale in India and abroad and is in great demand by the various food industries.
Metal tin is mainly used in the manufacture of alloys.
Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment.
Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials.
Standard
ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 ,
Content
Pb â?¥ 99.99 %
Density
11.34 g / cm 2
Color
Bluish
Weight
35 kgs / lump, 55 kgs / lump
Dimension
21" x 4" x 2.5"
Package
Standard Sea-worthy package, fixed by belt per ton
Shape
Rectangular Lump
Application
lead-acid storage batteries
Ammunition, cable sheathing, and building construction materials
counterweights, battery clamps
cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil
The manifold valves are manufactured to endure all differential pressure and liquid level application needs. Manifolds Valve is designed for static pressure and liquid level applications. These manifolds are available in traditional and compact body designs. Manifold connections include female tube fittings, pipe ends (NPT and ISO 228/1), and flanges (MSS SP-99) in 1/2 and 3/4 in. and 12 mm sizes
The units are available in 2 valve manifold, 3 valve manifold, and 5 valve manifold product designs.The 2 valve units are designed to withstand static pressure in an industrial setting. The 3 level and 5 level valve units are expressly designed for the purpose of surviving and maintaining the differential pressure applications. The units have been designed with a temperature rating with operating parameters which range up to 232 C with packing of PTFE and optional 428 C with packing of graphite. The units are designed and manufactured to withstand a pressure parameter rating of up to 6000 PSIG.
We supply quality live red king crabs, frozen red king crab legs for human consumption.
- product name: live red king crab (paralithodes camtschatica)
- size available: typically 0. 5 to
- product name: live red king crab (paralithodes camtschatica)
- size available: typically 0. 5 to 3. 0kg apiece
1kg - 5kg
- meat fill: 80% or higher year round
- origin: Maputo
- packing for shipment: 14kg in a styrofoam box with ice-packs as coolant
- mortality: expected to be 2% lower dead on arrival
- price: offering at request
Processing: Legs & Claw | Frozen IQF | Fresh
20/24 ct. (46-48 legs per 20 lb. case)
20/up ct. (approximate 35 count, 70 legs or less per 20# case)
Processing: Leg & cooked | Frozen IQF
Product: Frozen cooked king crab legs with clusters
Size: awaiting you decision on the sizes
Price: Contact Us For prices
Delivery: 3 days after payment by air and 21days by sea
We also offer live king crab delivered by air worldwide.
We supply quality live red king crabs, frozen red king crab legs for human consumption.
- product name: live red king crab (paralithodes camtschatica)
- size available: typically 0. 5 to
- product name: live red king crab (paralithodes camtschatica)
- size available: typically 0. 5 to 3. 0kg apiece
1kg - 5kg
- meat fill: 80% or higher year round
- origin: Maputo
- packing for shipment: 14kg in a styrofoam box with ice-packs as coolant
- mortality: expected to be 2% lower dead on arrival
- price: offering at request
Processing: Legs & Claw | Frozen IQF | Fresh
20/24 ct. (46-48 legs per 20 lb. case)
20/up ct. (approximate 35 count, 70 legs or less per 20# case)
Processing: Leg & cooked | Frozen IQF
Product: Frozen cooked king crab legs with clusters
Size: awaiting you decision on the sizes
Price: Contact Us For prices
Delivery: 3 days after payment by air and 21days by sea
We also offer live king crab delivered by air worldwide.
Crown Rubber & Plastic Products manufactures high-performance butterfly valve seals designed to effectively seal all key leakage pointsâ??pipe sealing areas, operating shafts, flanges, flap valves, and disk valves.
We offer in-house tooling and rapid production to meet custom requirements with minimal lead time.
Our seals provide high sealing efficiency with low torque operation and are available in sizes ranging from 25 mm to 950 mm.
Depending on application needs, materials include Natural Rubber, EPDM, Nitrile, Neoprene, Silicone, FKM, and Viton.
Fresh Onions Exporters cheap Price 5-6/7-8cm Packing in 20KG/25KG Mesh bag, Sell to Senegal Mali Ghana and rest of the world Market by sea
naturally delicious, fresh and tender, crunchy and juicy
Product Name Fresh Onions Exporters Cheap Price 5-6/7-8cm Packing in 20KG/25KG Mesh bag, Sell Senegal Mali
Ghana Market by sea
Sizes 3-5cm, 5-7cm, 6-8cm, 8-10cm, 10cm up
Shape Round/Oval
Color Yellow or Red
Supplying Period All the year round
Transporting Temperature -1 â?? - 0 â??
Capacity
Cartons packing 26 tons for 40'rh
Bags packing 28 tons for 40'rh 13 tons for 20'rh
Supply ability 10000 tons per month
Supplying Period All the year round
Packaging details
1) Loose Packing:
a) 10kg/carton; b) 20kg/carton; c) 10kg/mesh bag; d) 20kg/mesh bag;
2) Small packing:
a) 1kg/bag, 1kg x 10bags/carton; f) 4pcs(250g)/bag, 250g x 40bags/carton;
b) 500g/bag, 500g x 20bags/carton; g) 5pcs/bag, 10kg/carton;
c) 250g/bag, 250g x 40bags/carton; h) 1kg/bag, 5kg/mesh bag;
d) 200g/bag, 200g x 50bags/carton; i) 500g/bag, 5kg/mesh bag
e) 3pcs(200g)/bag,200g x 50bags/carton
3) Customized packing: according to clients' requirements.
Hitesh Metal is one of the expertise manufacturer and exporter of Steel Manifold Valves, which is a hydraulic manifold that combines one or more block / isolate valves, and one or more bleed / vent valves, into one component for interface with other components (pressure measurement transmitters, gauges, switches, etc.) of a hydraulic (fluid) system.
The purpose of the block and bleed manifold is to isolate or block the flow of fluid in the system so the fluid from upstream of the manifold does not reach other components of the system that are downstream. Then these Stainless Steel Manifold Valves bleed off or vent the remaining fluid from the system on the downstream side of the manifold. For example, a block and bleed manifold would be used to stop the flow of fluids to some component, then vent the fluid from that component side of the manifold, in order to effect some kind of work (maintenance/repair/replacement) on that component.
Carbon Steel Manifold Valves is factory tested with nitrogen for leakage at the seat and packing, which is performed with de ionised water at 1.5 times the working pressure; however, other tests like vibration, temperatures, helium and so on are available upon requests. Each and every package is labelled for proper and easy identification.
Hitesh Metal also offer these Alloy Steel Manifold Valves in different sizes, shapes and designs as per customers specifications at affordable rates.
Types of 2 Way, 3 Way & 5 Way Manifold Valves
2 Valve Manifolds
Straight Type Tee Type
H Type
3 Valve Manifolds
Straight Type Tee Type
H Type
5 Valve Manifolds
Straight Type Tee Type
H Type
Monoflange Valves
Dimensions of ANSI/ASME B16.10 Manifold Valves
2-Way Manifold Valve
NPT Inlet & Outlet & NPT Vent Plug
NPT Inlet & NPT Vent Plug
NPT Inlet & Outlet &NPT Vent Plug
NPT Inlet & NPT Vent Plug
NPT Inlet & Outlet & Vent Plug
Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410.
Salient Features
- Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.
Specification
- Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP)
- Version : Single Phase 160V to 230V, 50Hz, AC Supply
- Speed : 2880 RPM
- Head Range : 14 Mtr. to 96 Mtr.
- Discharge Range : 70 LPM to 15 LPM
- Outlet Size in Inch : 1.25"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m�²/sec (max.)
- Ph Value : 6.5 to 8.5
V3 Borewell Submersible Pumpset
Falcon standard 73mm (3") Borewell Submersible pump is firmly coupled to a submersible electric motor which Operates by being submerged beneath the surface of the water. The optimal design of impeller and diffuser enables the best Possible hydraulic efficiency. Built-in check valve prevents back flow and reduces the risk of water hammering. All Vital components of these pumps are made up of corrosion resistance thermoplastic and the shaft is of SS 410.
Salient Features
- Motor portion covered with corrosive resistance Stainless steel (SS 204cu) shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.
Specification
- Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP)
- Version : Single Phase 160V to 230V, 50Hz, AC Supply
- Speed : 2880 RPM
- Head Range : 14 Mtr. to 96 Mtr.
- Discharge Range : 70 LPM to 15 LPM
- Outlet Size in Inch : 1.25"
- Degree of Protection : IP 58
- Direction of Rotation : Counter clockwise from driving end -1 pH Minimum cooling 1pH
- Flow Along the Motor : 0.15 m/sec.
- Type of Duty : S1 (Continuous)
- Method of Starting : 1ph-Capacitor
- Maximum Starts Per Hour : 20 Times
Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 6 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
2122 Sea Elite Mod G Valve And Manifold Suppliers
Short on time? Let Sea Elite Mod G Valve And Manifold sellers contact you.
