Compressor single stage, standard speed oil-injected rotary screw compressor with manufactured by German company Drucklufttechnik GmbH in year 2002. The complete unit consists of intermediate pressure vessel and Ultratroc - air dryer all delivered same time as the compressor. The unit is controlled by modern DELCOS 3000 control unit. The total unit has 30320 operating hours, the unit has been regularly serviced by a compressor service company and is in good operational condition. The compressor is single-stage, double screw, V-belt driven electric motor drive compressor which has oil cooler and thermostat controlled water - air after cooler on discharge of the pressurized air. The operations were stopped in year 2006 but the compressor and other equipment are still installed and ready for test run.
Technical data:
Compressor type:CompAir L90 7,5A
Capacity:16.1 m3/min, 7.5 bar
Comp. electric motor:90 kW - 400/415 V û 50 Hz
Air cooler electric motor:3.0 kW - 400/415 V û 50 Hz
Compressor weight:2380 kg
Compressor dimensions:2.4 x 1.4 x 2.0 m (W x L x H)
Air dryer type:Ultratroc SD 1350 û type 422
Air dryer air volume:22.5 m3/min
Total power requirement of dryer:2.4 kW
DryerÆs refrigerant:Type R134 a û filling 3.5 kg
DryerÆs dimensions:1200x900x800 mm, weight 185 kg
Int. mediate air pressure vessel:Volume 2 m3, 10 bar, made by Galvanoimis Oy.
Turmeric is one of nature's most powerful healers. The active ingredient in turmeric is curcumin. Tumeric has been used for over 2500 years in India, where it was most likely first used as a dye.
The medicinal properties of this spice have been slowly revealing themselves over the centuries. Long known for its anti-inflammatory properties, recent research has revealed that turmeric is a natural wonder, proving beneficial in the treatment of many different health conditions from cancer to Alzheimer's disease.
Here are 20 reasons to add turmeric to your diet:
1. It is a natural antiseptic and antibacterial agent, useful in disinfecting cuts and burns.
2. When combined with cauliflower, it has shown to prevent prostate cancer and stop the growth of existing prostate cancer.
3. Prevented breast cancer from spreading to the lungs in mice.
4. May prevent melanoma and cause existing melanoma cells to commit suicide.
5. Reduces the risk of childhood leukemia.
6. Is a natural liver detoxifier.
7. May prevent and slow the progression of Alzheimer's disease by removing amyloyd plaque buildup in the brain.
8. May prevent metastases from occurring in many different forms of cancer.
9. It is a potent natural anti-inflammatory that works as well as many anti-inflammatory drugs but without the side effects.
10. Has shown promise in slowing the progression of multiple sclerosis in mice.
11. Is a natural painkiller and cox-2 inhibitor.
12. May aid in fat metabolism and help in weight management.
13. Has long been used in Chinese medicine as a treatment for depression.
14. Because of its anti-inflammatory properties, it is a natural treatment for arthritis and rheumatoid arthritis.
15. Boosts the effects of chemo drug paclitaxel and reduces its side effects.
16. Promising studies are underway on the effects of turmeric on pancreatic cancer.
17. Studies are ongoing in the positive effects of turmeric on multiple myeloma.
18. Has been shown to stop the growth of new blood vessels in tumors.
19. Speeds up wound healing and assists in remodeling of damaged skin.
20. May help in the treatment of psoriasis and other inflammatory skin conditions.
Assay 99.0%min
PH Value 5-7
Heavy Metal 0.001%max
Calcium Oxide 23.4%min
Nitrogen 11.76%min
Sulphates 0.03%max
Chloride 0.005%max
Water Insolubles 0.01%max
Iron 0.003%max
We can supply Acetic Acid Industrial Grade and Food Grade.
Commodity:Acetic acid.
Other name: Glacial acetic acid
Molecular formula CH3COOH
CAS:64-19-7
EC No.200-580-7
Introduction:
Annual capacity of our glacial acetic acid is 350,000.the raw material is methanol.we use a new technical process to produce: Methanol decomposition.
the most important characteristic of this way are as following:
mild oder; high quality--can reach 99.99%min; low cost--30% lower than oil decomposition and ethanol decomposition way.
Specifications:
Apha color:<10
Freezing point: 16
Specific gravity:1.04
Acetid acid: 99.8%
Acetaldehyde: 0.004%
Formic acid: 0.06%
Iron: 0.00004%
Non-Volatile Matter: 0.003%
The heavy metal(As Pb counts): 0.00002%
can supply REBARS as per below: -Size: 6mm to 50 mm -Length: 6 meters up to 16 meters -Packing: Once folded bundles available.
hese corrugated steel bars are used as tension devices in the construction of concrete slabs and walls, as well as decorative/ornamental grille work. When used in concrete constructions, these help to strengthen and hold concrete when it is compressed, and come in a wide variety of sizes to fit various building construction needs. At ARC. AVAILABLE IN 3/8 (10mm), 5/8 (16mm), (20mm), (12mm), 1 (25mm) and 1 (32mm)
11114 Screw Compressor Compair 16 M3 Min 7 5 Bar Suppliers
Short on time? Let Screw Compressor Compair 16 M3 Min 7 5 Bar sellers contact you.
PRODUCT DETAILS :
Size Length : 50 mm x 50 mm x 25 mm
Fixed Carbon : 60% to 65%
Ash : 8% max
Volatile Matter :16% to 18%
Moisture : Below 5%
GCV : 5000 to 5500 Kcal/kg
Burning Time : 45 mins
Packing : 2 KG , 5 KG Printed paper bag packing and 20 kg 5 ply master carton box.
Las 4NF- Lactose Substitute Non- Fat Solid is an Enzymatically Modified, Clean Label, Vegan, Gluten-Free, Plant-based and Non-GMO
starch used as a special additive for improving texture of Paneer. It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG).
APPLICATIONS
1. Milk is first heated (pasteurizing) to 85�°C and held for 12 minutes.
2. Add 2% to 20% of LAS 4NF based on the Protein Content of the Milk to
the pasteurized milk and stir slowly to ensure full dissolving at 80C.
3. LAS 4NF itself contains coagulant. If necessary add coagulant as per the costumer requirement slowly to the milk by slow stirring, maintaining the
temperature at 70�° C.
4. Keep Slow stirring for complete separation of solids and whey.
(Indication: Whey will turn to light green color and small lumps of solids
will settle down)
5. The whey water is filtered through a fine mesh of muslin cloth. The separated particles remain in muslin cloth and it is held in hoofer.
6. Apply pressure on the covered solid spread evenly on hoofer, with a flat lid in lay till water droplets stop.
7. Then the Paneer is pre-cooled in pure water at room temperature for 10 mins or till the external sides can be held in hand water for 10 mins , then
dip in chilled water for 4 hours.
DOSAGE
Use 2 to 20% of LAS 4NF of total batch size, based on the protein content of the milk. For lower protein content in the milk higher LAS 4NF need
to be used.
PHYSICAL APPEARANCE ASPECT
Agglomerate materials COLOR Gray blackish color
CHEMICAL BEHAVIOR
The basicity of the slag is normally fixed by the amount of lime and calcinated dolomite added, the silicon and aluminum levels of the hot metal and steel scrap charged as well as ferro-alloys.
Below present our general procedures for the purchase and sale of sugar of Brazilian origin:
1- Buyer issues a Letter of Intention (LOI) addressed to Seller;
2- Seller issues a Soft Corporate Offer (SCO);
3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller;
4- Seller issues Full Corporate Offer (FCO);
5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller;
6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented;
7- SPA is signed by Seller and Buyer;
8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank;
9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC);
10- Seller issues Performance Bond (PB) 2%;
11- Seller prepares the product and export documents;
12- Buyer receives the export documents by mail;
13- Buyer makes payment 100% to Seller�´s Bank through transfer bank (Swift Message MT-103);
14- Shipping;
15- Seller sends the original export documents to Buyer;
NOTES:
The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.
About THE Product :
Blast furnace slag is used in the production of cement (iron Portland and blast furnace cement).
Air-cooled blast furnace slag is formed by allowing the molten slag to cool relatively slowly under ambient conditions; final cooling can be accelerated with a water spray. The cooled material is hard and dense, although it can have a vesicular texture with closed pores. After crushing and screening, air-cooled slag can be used in several applications.
Granulated slag is formed by quenching molten slag in water to form sand-sized particles of glass. The disordered structure of this glass gives the material moderate hydraulic cementitious properties when very finely ground into granulated blast furnace slag, but if it can access free lime, the granulated blast furnace slag develops strong hydraulic cementitious properties.
Pelletized or expanded slag is cooled through a water jet, which leads to rapid steam generation and the development of innumerable vesicles within the slag. The vesicular texture reduces the overall density of the slag and allows for good mechanical binding with hydraulic cement paste.
Blast Furance Slag is a nonmetallic co-product which is produced in the process of iron manufacturing, Granulated Blast Furnace Slag is a glassy granular material formed when molten blast furnace slag is rapidly cooled by direct water.
Rapid cooling prohibits the formation of crystals and forms glassy, non-metallic, silicates and alumino silicates of calcium.
GBFS : (Granulated Blast Furnace Slag)
Source : Granulated BF Slag From Gujarat State, India
Supply Quantity : 50,000 Metric Tons Per Month
Packing: Bulk
Parameters (% BY MASS)
CaO 30-38
Al2O3 15-20
SiO2 30-40
Glass Content 85-97
MgO 8-11
Fe2O3 0.5-1.5
Moisture 10 MAX
Size -5mm Min 95, +5 mm Max 5
Relative Gravity 2.9
Bulk Density(Bagged) 1200 KG/M3
FOB: PROCEDURE TANK TO TANK (TTT)-2
NON-NEGOTIABLE
F.O.B. FREE ON-BOARD TANK TO TANK PROCEDURE (DIP AND PAY)
1. Buyer issues ICPO and Company Registration Certificate or any I.D. With TSA for
seller's verification.
2. Seller issue Draft Commercial Invoice, Buyer signs and returns to Seller with his Tank
Storage Agreement.
3. Seller lease and pays the buyer's tank for 3 days for the tank to tank Injection Process,
Buyer do pay his Tank Farm Company for 2 days after the Tank Farm Company has received
the payment from Seller Company. (Note: If buyer has existing TSR and or buyer can provide
TSR after the sign of commercial invoice on its own, there will be no need for joint payment
for the buyer tanks.
4. Seller provides buyer with FULL POP Documents:
Fresh SGS Report less than 48 hours
Dip Test Authorization-Unconditional
Injection Report
Storage Receipt with GPS Coordinates
Tank Farm Bar-code Information
Letter of Commitment to Supply.
Registration Certificate & Export License Copy
Authority to Sell & Collect (ATSC)
Endorsed Injection Schedule by the buyer & buyer Tank Farm
ATV - For Physical Verification
Irrevocable Commitment to Supply for Spot and 12 months Contract
Injection Schedule signed by buyer & buyer's tank farm
5. Buyer conducts Dip-Test in seller's tank; via SGS on buyer's cost seller inject the fuel
into buyer's tank and Buyer makes payment based on Q&Q by MT103 wire transfer / TT
according to the final Commercial Invoice.
6. Seller transfers the title of ownership as per Buyer's instruction. Buyer lifts the
product.
7. Seller pays all intermediaries involved in the transaction and subsequently monthly
contract shipment continues as per terms and conditions of the sales and purchase
agreement contract between buyer and seller
Total sugar: 65% min.
Total Brix: 75% min.
SO2: < 16 mg/kg.
d: 1.4g/ml.
Delivery time: 5-7 days.
Lead, Cadmium, Asen, Mercury, Herbicide content: not detected.
Capacity: 1,000 tons/ month, MOQ: 24.5MTs/20â??.
Packing: in 24.5tons flexi-bag or 24*40kgs gallons/pallet, 21pallets in total.
If you need more information, please contact me via,
* Specifications:
- Total sugar: 65% min.
- Total Brix: 75% min.
- SO2: < 16 mg/kg.
- d: 1.4g/ml.
* Delivery time: 5-7 days.
* Lead, Cadmium, Asen, Mercury, Herbicide content: not detected.
* Capacity: 1,000 tons/ month, MOQ: 24.5MTs/20�¢??.
* Packing: in 24 tons flexi-bag 80 drums 250kg, 20 pallets in total.
We have a factory in Vietnam, contact me for the best and most suitable price.
Looking forward to your response and hoping for a successful business collaboration.
11114 Screw Compressor Compair 16 M3 Min 7 5 Bar Suppliers
Short on time? Let Screw Compressor Compair 16 M3 Min 7 5 Bar sellers contact you.